Global Standard for Packaging and Packaging Materials Issue 4 : February 2011

Transcriptie

1 P026: Materials Issue 4 Materials Issue 4 : Company Name: Fleoplast B.V. Site name: Fleoplast B.V. Audit Category: High Hygiene Risk BRC Site Code: Audit Result: CERTIFICATED Audit Grade: Audit Frequency : A or B = 12 months C = 6 months A 12 months Audit Start Date: Audit Finish Date: Re-audit Due Date: Previous Audit Date: Auditor Number (one only : team leader) Auditor Names R.A.M van Waes T.Vrij Scope Details Packaging Field: 04 - Plastics Select a packaging field Select a packaging field Select a packaging field English: Manufacturing (slitting, printing, laminating and sealing) off polyethylene and poly-propylene fleible packagingdutch: Het produceren (snijden, Scope of Audit: bedrukken, lamineren. sealen) van poly-ethyleen en poly-propylene fleibele verpakkingen Eclusions from Scope: None Non-applicable clauses: Products in production at the time of the audit: Fleible packaging for Potato King FP PRI Company Profile The company Fleoplast B.V. is a production plant for printing and converting fleible packaging within the Clondalkin Group (international converter of fleible PE/PP films, laminated packaging) in Harlingen the Netherlands. There is a sister company Fleoplast location in Wieringerwerf the Netherlands as well who do the etrusion part of the production of packaging and after that they deliver the material films to the company in Harlingen. Fleoplast B.V. produces fleible packaging for (direct/indirect contact) for the food industry and also for non-food purposes. Equipment in use: 1 laminating machine P026 Issue: 4 Page 1 of 29 Report No:

2 5 Fleo printing presses 14 Confection seal machines P026: Materials Issue 4 Turnover Fleoplast in kg. = T Turnover Fleoplast in = 45milj The company has about 110 employees working in 2 or 3 shifts in Harlingen, only the staff in the ink department is working in day time. Age of site already 50 years but modern redeveloped, size m². The site is also registered for ISO No product changes since last audit. During 2011 a new 8-color printing machine is installed. There are seven product categories were products can be used for: Frozen Bundle Bakery Agriculture Hygiene Pet Food Insulation In the company 1 overall HACCP study is in place. P026 Issue: 4 Page 2 of 29 Report No:

3 P026: Materials Issue 4 Detail of Non Conformities Summary of Non-Conformity Raised No. Critical non-conformity Major non-conformity Major against statement of intent of a Fundamental clause Minor non-conformity 6 No. Critical No. Requirement ref. Detail of Non-Conformity Proposed audit date Reviewed by Major against SOI of a Fundamental Clause No. Requirement ref. Detail of Non-Conformity Proposed audit date Reviewed by Major No. Requirement ref. Detail of Non-Conformity Corrective action taken (with consideration of root cause) Evidence provided Document Photograph Visit/Other Date signed off Reviewed by Minor No. Requirement ref. Detail of Non-Conformity At the moment of the audit there wasn t an appropriate documented arrangement in place to cover for the absence of key staff. Corrective action taken (with consideration of root cause) An appropriate documented arrangement to cover for the absence of key functions was not in place because of the growing and changing functions in Fleoplast. In the MT meeting of is decided to prepare such a document. The concept document is prepared and shall be Evidence provided Document Photograph Visit/Other Anne 1: concept document covering key functions Dated signed off Reviewed by RVW. P026 Issue: 4 Page 3 of 29 Report No:

4 P026: Materials Issue Procedure of verification is still not established to confirm that the HACCP plan is effective in the form of internal audits (at an interval of 12 months), review of / CP records on a daily basis, review of customer feedbacks including complaints, GMP audits. Where a significant issue occurs the team is reconvened to consider the hazard and risk management plan. confirmed in the net MT meeting Verification of the HACCP plan will be covered by the planning of internal audits in Management review and the results of internal audits will be picked up after the MR of CPrecords and customer feedbacks will be picked up after the MR Anne 2: agenda MR Anne 3: Notes MR Anne 3: planning internal audits RVW Purchases sought from 3 non-approved suppliers are not clear. 3 Suppliers hasn t an accepted status. The required responsibility to be approved by the purchasing manager is not clear There is no evidence available of pressured air. The monitoring to effectively control the risk of product contamination is not available Gender specific locker and changing rooms provided with appropriate lockers for segregation of personal clothing and work wear, including toilets are available. A few lockers were open and inside dirty with potential risk for contamination. Almost 99% of supplier s information is available. No qualification to the status how suppliers level is in reality. System of suppliers qualification updated (see Anne 4) Pressured air is used for printing process. Program for maintenance is available. There is no risk for contamination because of when pressured air is out of work there is no printing process possible. Lockers should be closed always. This is the responsibility of the employees. Dirty working clothes in the same lockers as the privately clothes is forbidden. A special internal instruction is distributed in the company Anne 4: suppliers information Anne 5: contract maintenance pressured air. Pressured air is part of the HACCP risk analysis and no risk of contamination is possible Anne 6: Internal instruction lockers and clothing P026 Issue: 4 Page 4 of 29 Report No: RVW. RVW. RVW.

5 P026: Materials Issue Not available is the migration document of TPL NT-03 Mydibel X ANT 10783ei Migration tests are available from most products. Mydibel test was not available because of this new customer. Test is now available Anne 7: Migration tests Mydibel RVW. P026 Issue: 4 Page 5 of 29 Report No:

6 Company Name : Fleoplast B.V. Site Name : Fleoplast B.V. Address : Industrieweg 1, Harlingen P026: Materials Issue 4 Company Details Country : The Netherlands Country : The Netherlands Telephone : +31(0) Telephone : +31(0) Company Representative Name: Mr. W.de Lange( Quality Manager ) w.de lange@fleoplast.nl Key Personnel Name/Job Title Note: the most senior operations manager on site should be listed first and be present at both opening & closing meetings Name J.v/d. Meer Managing director Name M.Boon Operations manager Name W.de Lange QSHE Manager Name Sjors Bijlsma Quality controller assistent Name K. Struiksma Head of TD ( maintenance) Name W. Roorda Manager R&D/Technical manager Name S. Rouji Operator inkt kitchen Name P. v/d Ploeg Operator Lamineer afdeling Name E. Visser Operator Stella 8 drukpers Name J.Kuiken Operator Snijmachine Kampf 271) Name E. de Vries Driver eternal transport company J.Pronk Name L. v/d Veen Epedition/ internal storage Name M. Oegema Operator Name S.Dijkstra Operator Name J.Rutten Operator Name J.Bootsma Lab operator Name C.van Dessel Manager Rescources Name K. Boksma Head of purchase Name P.Hoogendam Sales Manager Opening Meeting Present at Audit () Site Procedure Inspection Review Closing Meeting P026 Issue: 4 Page 6 of 29 Report No:

7 Name J.van Houten Sales binnendienst Name K.Kooistra Grafische afdeling Name K.Nieveen Planning/ordervoorbereiding P026: Materials Issue 4 Audit Duration Details On-site audit duration 16 Man Hours Duration of production facility audit 3 Man Hours Reasons for deviation from typical (12 hours) or epected on-site audit duration or typical (3 hours) site inspection duration. Audit performed by two auditors Audit Duration per day Start time Finish time Day P026 Issue: 4 Page 7 of 29 Report No:

8 P026: Materials Issue 4 Detailed BRC Requirement No. REQUIREMENT Conforms, N or N/A Details 1 SENIOR MANAGEMENT COMMITMENT AND CONTINUAL IMPROVEMENT 1.1 Product Safety and Quality Management System Het top management van het bedrijf zal een productveiligheid- en kwaliteitsbeleid ontwikkelen en vastleggen dat geautoriseerd, ondertekend, geëvalueerd en gedatederd is door een geschikte senior manager. The company s senior management shall develop and document a product safety and quality management policy, which is authorised, reviewed, signed and dated by an appropriate senior manager There is a documented food safety policy which is signed by the Senior Plant Director, Jeroen van der Meer PO1A and is displayed both at the site entrance, and included within the staff hand book. 1.2 Senior Management Commitment FUNDAMENTAL Het top management van het bedrijf moet aantonen dat zij volledig betrokken is bij de implementatie van de vereisten van Global Standard for Packaging en Packing Materials. Dit betekent het beschikbaar stellen van adequate middelen, effectieve communicatie en een management review die leidt tot voortdurende verbeteringen. Verbeterkansen moeten worden vastgesteld, geïmplementeerd en volledig gedocumenteerd worden. The company s senior management shall demonstrate that they are fully committed to the implementation of requirements of the Global Standard for Packaging and Packaging Materials. This shall include provision of adequate resources, effective communication and systems of management review to effect continual improvement. Opportunities for improvement shall be identified, implemented and fully documented Het top management van het bedrijf dient er zorg voor te dragen dat meetbare productveiligheid- en kwaliteitsdoelstellingen zijn gedefinieerd, gedocumenteerd, beoordeeld en geëvalueerd. The company s senior management shall ensure that product safety and quality objectives are measurable, established, documented, monitored and reviewed. Organization has developed a QMS in accordance with ISO 9001:2008 standard and Global Standard for Food Safety. The visit shows that an effective system is maintained and compliant with the process controls and it is effective in meeting customer, process and product measures. Systems for continual improvement and PDCA cycle can be clearly demonstrated. This was demonstrated by interview with senior management team led by J. van der Meer Senior Plant Director The management team has an overall responsibility for the Quality Management System and reports on issues to the senior management team meetings each month. Annual management review meetings progress reviewed at 12 monthly review sessions. Records from review of 2011 checked. ( report P01F January 2012 ) Outputs from annual management review include targets for complaints, waste, down time, product quality. Results published on staff notice board. Goals for 2011/2012 To safe the new the BRC IoP certificate issue 4 Registrations of complains conform the PDCA Finishing of the new production line for film Review the planning of the internal audits Safety Leadership Visual Management Het top management van het bedrijf moet de personele en financiële middelen verschaffen om de processen van het kwaliteit managementsysteem en het product veiligheids programma te implementeren. The company s senior management shall provide the human and financial resources required to implement the processes of the quality management system and product safety programme. Meeting with Top Management demonstrated that adequate resource required for the effective operation are provided. - Quality Policy; - ear 2011/2012 goals; - Management review ( report P01F January 2012 ) P026 Issue: 4 Page 8 of 29 Report No:

9 P026: Materials Issue 4 Er moeten duidelijke communicatie- en rapportagekanalen aanwezig zijn voor de bewaking van het naleven van standaard. Clear communication and reporting channels shall be in place to report on and monitor compliance with the Standard. Het top management dient een systeem te hebben geïmplementeerd waardoor het bedrijf geïnformeerd wordt over voedselveiligheidissues, wetgeving, wetenschappelijke en technische ontwikkelingen, en Codes of Practices die van toepassing zijn in de landen waar het product verkocht en/of gebruikt zal worden. The company s senior management shall have a system in place to ensure that the company is kept informed of all relevant legislative requirements in the country of manufacture and, where known, the country in which the packaging material will be sold. The company shall also be aware of any scientific and technical developments and industry codes of practice applicable. Het bedrijf dient zeker te stellen dat alle producten geproduceerd worden volgens de relevante wetgeving (inclusief alle wetgeving aangaande het gebruik van gerecycled materiaal) van de landen waar het product verkocht en/of gebruikt wordt. The company shall ensure that the materials manufactured comply with the relevant legislation (including any legislation concerning the use of recycled content) in the country of manufacture and in which the products are intended to be sold and/or ultimately used, where known. Het top management van het bedrijf moet er voor zorgen dat afwijkingen die bij de voorgaande audit tegen de Standaard vastgesteld werden effectief zijn afgehandeld. The company s senior management shall ensure that non-conformities identified at the previous audit against the Standard are effectively actioned. Het bedrijf moet de actuele versie van de Global Standard for Packaging ter beschikking hebben. The company shall have a current, original copy of the Standard available on site. Het gecertificeerde bedrijf dient er voor te zorgen dat de hercertificatie zal plaatsvinden op- of voor de hercertificatie datum die vermeld is op het certificaat. Where the company is certificated to the Standard they shall ensure that recertification audits occur on or before the audit due dated indicated on the certificate. Daily shift handover meetings take place including reports on internal audits Monthly management records for 2011 reviewed and satisfactory. Company s senior management gets legal and regulatory updated through different channels: Website nvwa Website branches Magazines Industry news via daily newsletters Internet sites Training Etern consultant if necessary Products manufactured in, and sold to different countries. Compliance with legislation demonstrated by DoC (declaration of compliance) contents 7 non-conformities from the previous audit were closed out and have not recurred at this audit The Global Standard for Packaging Issue 4, February is available in hard copy Re-evaluation due dated scheduled for the present audit was respected. 1.3 Organisational structure, responsibilities and management authority P026 Issue: 4 Page 9 of 29 Report No:

10 P026: Materials Issue 4 De organisatie dient een duidelijke organisatie structuur op te zetten waarbij verantwoordelijkheden, relaties tussen rapportages en functiebeschrijvingen zijn vastgelegd voor medewerkers die werkzaamheden uitvoeren m.b.t. product veiligheid, wet- en regelgeving en kwaliteit. The company shall have a clear organisational structure and define the responsibilities, reporting relationships and job functions of those personnel whose activities affect product safety, legality, regulatory compliance and quality. N The management structure is documented within the quality manual, with designated deputies. The senior management team is comprised of the Production Manager, Sales/Marketing Manager, Manager finance, Manager HRM and the Technical Manager. All Managers are reporting to the Senior Plant Director. There are 6 shift managers for each shift and 2QA supervisors. Job descriptions are available for all managers and supervisors and a responsibility matri has been documented. The job description for the QA supervisor is reviewed and found to be satisfactory. Work instructions form part of the Quality Manual. Reviewed PO2F-RF-01 production At the moment of the audit there wasn t an appropriate documented arrangement in place to cover for the absence of key staff. Minor At the moment of the audit there wasn t an N appropriate documented arrangement in place to cover for the absence of key staff. 1.4 Management Review Het topmanagement van het bedrijf zal de management review uitvoeren om zeker te stellen dat het product veiligheids- en kwaliteitsprogramma effectief en volledig geïmplementeerd is en mogelijkheden voor verbetering zijn vastgesteld. The company s senior management shall ensure that a management review is undertaken to ensure that the product safety and quality programme is fully implemented, effective and that opportunities for improvement are identified The management review is chaired by senior Plant Director, J. van der Meer There is an annual review with 12-monthly progress review sessions with senior management. Minutes of the meeting and action plan from 2011 reviewed and included all the required items. The 12-montly review meetings are used to review progress. Minutes include timescales and confirmation of completion, progress toward agreed targets, e.g. customer complaints, which are then briefed to team leaders where required. 2 HAZARD AND RISK MANAGEMENT SSTEM 2.1 Hazard and risk management team Het HACCP-plan moet ontwikkeld en beheerd worden door een multidisciplinair voedselveiligheids team en dient te zorgen dat dit volledig wordt toegepast. A multidisciplinary hazard and risk management team shall be in place to develop and manage the hazard and risk analysis system and ensure this is fully implemented Hazard and risk management team made up of 5 people representing J. van der Meer (Senior Management), M.Boon (Production manager) W de Lange (QA manager) and Technical Managers W Roorda and A Kramer. Team led by Quality Assurance Manager W de Lange, since 2011 and has formal training hazard and risk management training Last training The system is well laid out, demonstrating competence. The members of the senior management team are able to keep the team up to date with factory changes and customer requirements. 2.2 Hazard and Risk Analysis FUNDAMENTAL Een formeel gevaren- en risico management systeem dient aanwezig te zijn om zeker te stellen dat alle gevaren voor de veiligheid van A formal hazard and risk managements system is in place to producten en integriteit volledig zijn ensure that all hazards to product safety and integrity are geïdentificeerd en er passende beheersing is ontwikkeld. identified and appropriate controls established. A formal hazard and risk managements system shall be in place to ensure that all hazards to Procedure P04A product safety and integrity are identified and appropriate controls established. P026 Issue: 4 Page 10 of 29 Report No:

11 P026: Materials Issue 4 De scope van de gevaren en risico-analyse moeten duidelijk zijn gedefinieerd en heeft betrekking op alle producten en processen die binnen de scope vallen van de certificering. The scope of the hazard and risk analysis shall be clearly defined and shall cover all products and processes included within the intended scope of certification. Het HACCP team is bekend en dient rekening te houden met: historische en bekende gevaren van specifieke processen, grondstoffen of het eind gebruik van het product relevante gedragscodes of erkende richtlijnen wettelijke eisen The hazard and risk analysis team shall maintain awareness of and take into account: historical and known hazards associated with specific processes, raw materials or end use of the product relevant codes of practice or recognised guidelines Legislative requirements. Een volledige beschrijving van het product moet worden ontwikkeld waarin alle relevante informatie over productveiligheid en integriteit zijn vastgelegd. Als leidraad kan dit zijn: Samenstelling van bijv. grondstoffen, inkten, vernissen, coatings en andere print chemicaliën. herkomst van de grondstoffen inclusief het gebruik van gerecyclede materialen Het beoogde gebruik van de verpakkingsmaterialen en vastgelegde beperkingen bij het gebruik, bijvoorbeeld direct contact met levensmiddelen, fysische of chemische omstandigheden. A full description of the product shall be developed, which includes all relevant information on product safety and integrity. As a guide this may include: composition, e.g. raw materials, inks, varnishes, coatings and other print chemicals origin of raw materials including use of recycled materials intended use of the packaging materials and defined restrictions on use; for instance, direct food contact, physical or chemical conditions. The scope of the hazard and risk management is based on clearly defined and manufacture of plastic films. Modules are used for manufacturing characteristics are generic The QA Manager maintains a technical file and uses industry newsletters, Website nvwa, internet sites, training and as information sources. He also subscribes to various alert systems including the recall alert system Product descriptions were adequate and included all required items. Eamples raw materials: Foil FP Ink 90 LSH-12/FJ 32 Harder 00LRJ-11/DMO1 Lacquer 10LSI-32/FJ32 Glue UR 7780 Harder UR6080 Finished product G No recycled content (aside from in-house regrind) as materials are direct food contact. P026 Issue: 4 Page 11 of 29 Report No:

12 P026: Materials Issue 4 Van elk product, productieproces en productgroep moet een flow diagram zijn opgesteld. Deze omvat elke processtap vanaf de ontvangst van de grondstoffen tot verzending naar de klant. De processtroom dient als een gids, voor onder meer de volgende toepassingen (indien relevant): ontvangst en goedkeuring van ontwerpen ontvangst en de voorbereiding van grondstoffen zoals additieven, inkt en kleefstoffen elke productieproces stap het toepassen van rework en mogelijk te gebruiken gerecycled materiaal uitbesteden van werk bij onderaannemers retouren van de klant Het HACCP team dient de nauwkeurigheid van de processtromen te controleren. A process flow diagram shall be prepared for each product, product group or process. This shall include each process step from the receipt of raw materials to despatch to the customer. The process flow shall as a guide include, as relevant: receipt and approval of art work receipt and preparation of raw materials such as additives, inks and adhesives each manufacturing process step the use of rework and post-consumer recycled materials any sub-contracted operations customer returns. The accuracy of the process flow shall be verified by the hazard and risk analysis team. Het HACCP team identificeert en registreert alle mogelijke gevaren die redelijkerwijze te verwachten zijn bij elke stap in relatie tot het product en het proces. De volgende risico's worden beschouwd, indien van toepassing: microbiologie vreemde voorwerpen chemische verontreiniging (bijvoorbeeld kleur-, geurstoffen, allergenen, migrerende stoffen vanuit inkten, lak en lijm) potentiële problemen die voortvloeien uit het gebruik van gerecycleerde materialen rechtmatigheid gebreken die van cruciaal belang zijn voor de veiligheid van consumenten gevaren die een impact hebben op de functionele integriteit en prestaties van het uiteindelijke product tijdens het gebruik. The hazard and risk analysis team shall identify and record all potential hazards that are reasonably epected to occur at each step in relation to the product and process. The hazards considered shall include, where relevant: microbiological foreign objects chemical contamination (e.g. taint, odour, allergen, component transfer from inks, varnishes and glues) potential problems arising from the use of recycled materials legality defects critical to consumer safety hazards that may have an impact on the functional integrity and performance of the final product in use. Process steps: (manufacture of printed foil) receipt of raw materials, inspection, storage, melting, forming, inspection, approval, packing, storage, dispatch (where relevant) Tray forming: inspection, heating, thermoform, inspection, approval, packing, storage. Aanleverend transport Inkoop/verkoop Ontvangst en opslag Drukken Sealen Lamineren Drogen Snijden Verpakken Opslag Epeditie Afleverend transport Generic processes were covered on separate flow diagrams, which were comprehensive. Verification of the flow diagram carried out by the hazard and risk management team, dated and re-checked on occurrence of any factory or process changes The hazard and risk management plan included a review of potential hazards chemical, physical, microbiological, allergens and defects. Physical hazards include foreign body contamination and out-of specification product (defects). Microbiological hazards removed by pre-requisite controls. Potential sources of allergens such as late (e.g. gloves) are not permitted on site. Defects are managed by the pre-requisite program. These were listed by process step. P026 Issue: 4 Page 12 of 29 Report No:

13 P026: Materials Issue 4 Het HACCP team identificeert de noodzakelijke controle maatregelen om elk gevaar te voorkomen, te elimineren of te verminderen tot een aanvaardbaar niveau. Waar een controle is d.m.v. een PRP dienen deze te worden beoordeeld om te zorgen dat de geïdentificeerde risico's worden beheerst en waar nodig verbeteringen zijn doorgevoerd. The hazard and risk analysis team shall identify control measures necessary to prevent, eliminate or reduce each hazard to acceptable levels. Where control is through a prerequisite programme these shall be reviewed to ensure they adequately control the risk identified and where necessary improvements implemented. Voor elk gevaar dat controle, anders dan door een bestaande voorwaarde programma, vereist, dienen de controlepunten worden beoordeeld van degenen die als kritisch zijn geïdentificeerd. Dit proces omvat een beoordeling van het risiconiveau voor elk gevaar op basis van de waarschijnlijkheid van het optreden en de ernst van het resultaat. Kritische controlepunten zijn die controlepunten die nodig zijn om het risico (van veiligheid of integriteit van het product) te voorkomen, te elimineren of te verminderen tot een aanvaardbaar niveau. Waar de controles niet worden geclassificeerd als kritisch en controle wordt bereikt door een PRP, moet een programma zijn ontwikkeld dat voldoende is gespecificeerd om effectieve controles van de vastgestelde gevaren uit te voeren. For each hazard that requires control, other than by an eisting prerequisite program, the control points shall be reviewed to identify those that are critical. This process shall include an assessment of the risk level for each hazard based on the likelihood of the occurrence and the severity of the outcome. Critical control points shall be those control points that are required to prevent, eliminate or reduce a product safety or integrity hazard to acceptable levels. Where controls are not classified as critical and control may be achieved through a prerequisite programme, a programme shall be developed that is sufficiently specified to effectively control the identified hazards. Voor elke CCP, moeten geschikte kritisch grenswaarden worden gedefinieerd teneinde duidelijk te kunnen vaststellen of het proces al dan niet onder controle is. Waar mogelijk moeten de kritische grenswaarden meetbaar zijn en de onderbouwing van de vaststelling ervan moet duidelijk gedocumenteerd zijn. Er moet rekening worden gehouden met relevante wetgeving of praktijkgidsen bij het vaststellen van grenswaarden. For each critical control point, the appropriate critical limits shall be defined in order to identify clearly if the process is in or out of control. Critical limits shall be measurable where possible and the rationale for their establishment clearly documented. Relevant legislation and codes of practice shall be taken into account when establishing the limits. N/A The risk is assessed on the basis of a risk ranking table Risk = Possibility X Seriousness. On the basis of the outcome, the risk that may result in the risk factor is equal to an integer Suitable controls for each hazard were documented; in many cases these formed part of the prerequisite program. Hazards linked to the use of master batch (quality hazard) are covered by supplier approval and purchasing requirements in contracts. Foreign body contamination hazards are covered by prerequisite programmes: personnel disciplines, cleaning, equipment condition, and maintenance and pest control. Used of a HACCP decision tree in which the potential risks by the HACCP decision tree led to judge whether we are dealing with a CCP or CP. The study identified no critical control points. Ref. HACCP study PO4A P026 Issue: 4 Page 13 of 29 Report No:

14 P026: Materials Issue 4 Voor elke CCP, moeten geschikte kritisch grenswaarden worden gedefinieerd teneinde duidelijk te kunnen vaststellen of het proces al dan niet onder controle is. Gegevens van de monitoring worden onderhouden. Procedures met betrekking tot de bewaking van kritische controles moeten zijn opgenomen in interne audits tegen de standaard (zie artikel 3.4). For each critical control point a monitoring system shall be defined in order to ensure compliance with critical limits. Records of the monitoring shall be maintained. Procedures relating to the monitoring of critical controls shall be included in internal audits against the Standard (refer to clause 3.3). De corrigerende maatregelen die moeten worden genomen wanneer bij controle wordt vastgesteld dat er niet wordt voldaan aan de limieten moeten zijn gedocumenteerd. Dit omvat de blokkade (quarantaine) procedure en een evaluatie van producten die buiten de specificaties vallen. Dit om te waarborgen dat ze niet worden vrijgegeven tenzij bevestigd is dat ze geschikt zijn voor vrijgave. The corrective action that shall be taken when monitored results indicate a failure to meet the control limit shall be established and documented. This shall include the procedures for quarantining and evaluating potentially out of specification products to ensure they are not released until their safety can be established. De gevarenanalyse dient minimaal 1 per jaar te worden beoordeeld of als een proces verandert of bij een relevant incident. De beoordeling omvat een verificatie dat de gevaren-en risico-analyse op doeltreffendheid, de volgende zaken dienen beoordeeld te worden: klachten product fouten recalls terughalen van product resultaten van interne audits en Basis Voorwaarden Programma resultaten van eterne third party audits. A review of the hazard and risk management system shall be carried out at least once per year and following any significant incidents or when any process changes. The review shall include a verification that the hazard and risk analysis plan is effective and may include a review of: complaints product failures recalls product withdrawals results of internal audits of prerequisite programmes results from eternal third-party auditors. N/A N/A N No critical control points identified. No critical control points identified. Procedure of verification is still not established to confirm that the HACCP plan is effective in the form of internal audits (at an interval of 12 months), review of / CP records on a daily basis, review of customer feedbacks including complaints, GMP audits. Where a significant issue occurs the team is reconvened to consider the hazard and risk management plan. Minor 2.3 Eemption of requirements based on risk analysis Aangetoond is dat de vestiging voldoet aan de eisen van dit hoofdstuk. The site has demonstrated adequate compliance with the requirements of this clause No eemptions on the basis of risk were identified. 3 PRODUCT SAFET AND QUALIT MANAGEMENT SSTEM 3.1 Product safety and quality manual P026 Issue: 4 Page 14 of 29 Report No: