FAAC DRIVER Driver install procedure for FAAC boards Installatieprocedure voor driver voor FAAC-kaarten www.record-toegangstechniek.nl 1
When a FAAC board (E124 or E145) is connected to the USB port, it is necessary to install the correct driver. The window for the installation of a new hardware driver is automatically shown: it is necessary to follow the steps as in the following. Wanneer een FAAC-kaart (E124 of E145) op de USB-poort aangesloten wordt, moet de driver geïnstalleerd worden. Het venster "Begeleide installatie nieuwe hardware" wordt automatisch weergegeven: volg de stappen die hierna aangeduid worden. www.record-toegangstechniek.nl 2
Select the option to install the driver from a specified path. Selecteer het onderdeel "Installeer uit een gespecificeerde lijst of pad". www.record-toegangstechniek.nl 3
The driver is in the sub folder driver of the EasyBoard installation directory: specify the sub folder of the board actually connected to the USB port (E145 or E124). De driver van de kaart bevindt zich in de sub-map "driver", in de installatiemap van de software EasyBoard: specificeer de sub-map die overeenkomt met de kaart die daadwerkelijk op de USB-poort aangesloten is (E124 of E145). www.record-toegangstechniek.nl 4
An example of path for the E145 board is the following: C:\Program Files\FAAC SPA\EasyBoard\driver\E145 Een voorbeeld van een pad voor de kaart E145 is: C:\Programmi\FAAC SPA\EasyBoard\driver\E145 www.record-toegangstechniek.nl 5
An example of path for the E145 board is the following: C:\Programmi\FAAC\EasyBoard\driver\E124\Windows Een voorbeeld van een pad voor de kaart E124 is: C:\Programmi\FAAC\EasyBoard\driver\E124\Windows www.record-toegangstechniek.nl 6
For E145 only, in case several options are shown, select FAAC CDC board. Alleen in het geval van de kaart E145 zijn verschillende opties beschikbaar. Selecteer FAAC CDC board. www.record-toegangstechniek.nl 7
When the procedure completes, for the E145 board, the following window will appear: Na voltooiing van de procedure voor de kaart E145 verschijnt het volgende beeldscherm: www.record-toegangstechniek.nl 8
When the procedure completes, for the E124 board, the following window will appear: Na voltooiing voor de procedure voor de kaart E124 verschijnt het volgende beeldscherm: To verify the successful driver installation, right click on Computer and select Properties. Then, select Device Management in the Hardware tab. www.record-toegangstechniek.nl 9
Om de correcte installatie van de driver te checken, klikt u met de rechter muistoets op "Mijn computer" en selecteert u "Eigenschappen". Selecteer vervolgens "Beheer Randapparatuur" in de map "Hardware". If the driver have been correctly installed, a new item appears in Port COM. Als de driver correct geïnstalleerd is, verschijnt een nieuw item bij de COM-poorten. www.record-toegangstechniek.nl 10
Because the E145 driver is not currently certified, if the Operating System required for installation is Windows 8, in addition to what above specified, it is necessary at first to execute the following procedure, in order to disable the control of the driver digital signature automatically performed by this operating system: 1) Press at the same time on the keyboard the keys WIN and R 2) In the Run window, enter shutdown.exe /r /o /f /t 00 3) Confirm by clicking on the OK button 4) The system will restart to a Choose an option screen. 5) Select Troubleshoot from Choose an option screen 6) Select Advanced option from Troubleshoot screen 7) Select Windows Startup Settings from Advanced Option screen 8) Click Restart button 9) The system will now restart to Advanced Boot Option screen 10) Select Disable Driver Signature Enforcement 11) Once the system starts, install drivers as described above www.record-toegangstechniek.nl 11
With E124 board, if the installation Operating System is Windows 7, to manually install board drivers it is required to double click on the executable file (.exe) corresponding to the computer architecture, which is available in the installation folder at driver/e124/windows: a) CP210xVCPInstaller_x64.exe with a 64 bit platform b) CP210xVCPInstaller_x86.exe with a 32 bit platform www.record-toegangstechniek.nl 12