Rudi Grouset Support Engineer
2 Info Beckhoff Automation Belgium bvba Klaverbladstraat 11B 2/2 3560 Lummen Tel: +32 13 / 25 22 00 Fax: +32 13 / 25 22 01 info@beckhoff.be www.beckhoff.be Versie Datum Auteur v1.0 2016-02-08 Rudi Grouset (Support Engineer) Eerste uitgave v1.1 2016-02-24 Rudi Grouset (Support Engineer) Extra details v1.2 2016-06-10 Rudi Grouset (Support Engineer) Extra details
3 Inhoud Pagina Titel 4 Algemeen 6 Prijzen 8 BC-controllers digitaal 9 BC-controllers draadloos IEEE802.15.4 10 CX/CP-controllers digitaal 11 CX/CP-controllers ADS communicatie 12 Mix: BC, CX en CP-controllers digitaal, draadloos IEEE802.15.4 en ADS communicatie 13 Integratie veldbussen zoals Profibus, Profinet, CANopen enz in EtherCAT
4 Deze training is in eerste instantie bedoeld voor de scholen die voordien hebben deelgenomen aan het RTC project Pick & Place Er wordt geen verschil gemaakt voor de keuze basis of optie Deze training is verder ook geschikt voor scholen die verschillende machines via de PLCs (ook van andere merken) met elkaar willen laten communiceren Deelname is enkel mogelijk voor diegenen die de basis TwinCAT 2 of TwinCAT 3 beheersen (voor leraren door deelname aan een eerdere Beckhoff training, voor leerlingen door basiscursus TwinCAT in school) De training is bedoeld voor leerlingen LL en leraren TTT De deelnemers dienen geen eigen materiaal mee te brengen Wij voorzien in een trainingslokaal te Lummen of Kortrijk met 6 lesstanden met PCs en PLCs en verschillende communicatiemiddelen De deelnemers ontvangen een cursus, blocknote, balpen, schroevendraaier en USB-stick De deelnemers krijgen s middags een gratis broodjeslunch en drank (koffie, water)
5 Inhoud training (1 dag) Digitale communicatie Merk onafhankelijk Draadloze communicatie IEEE802.15.4 met KM6555 (wireless data exchange terminal) ADS (EtherNet) communicatie Beckhoff protocol Industriële Netwerken via EtherCAT Merk onafhankelijk koppelen met Profibus, Profinet, CANopen...
6 Omwille van de keuzes tussen Pick & Place - basis en optie en de mogelijkheid van koppelen van PLCs van andere merken is het niet mogelijk een éénduidige hardware configuratie te maken Standaard (deze mogelijkheid werkt voor alle scholen): 4x Pick & Place : digitale communicatie Prijs voor de school : 0 Optie 4x Pick & Place optie : ADS communicatie Prijs voor de school : 0 4x Pick & Place basis : IEEE802.15.4 communicatie Prijs voor de school : 280,48 + BTW = 339,38 Mix : 1x BC of CX/CP via digitale communicatie 1x BC via IEEE802.15.4 communicatie 2x CX/CP via ADS communicatie Prijs voor de school : 390,36 + BTW = 472,34 Communiceren met PLC van andere merken: Offerte op maat aan scholenkorting : Alle courante veldbussen uit de industrie, de building automation en de theaterwereld zijn mogelijk
7 4x BC8150-controller (RTC Pick & Place basis) Digitale communicatie tussen verschillende BC8150 PLCs Per communicatie zijn volgende modules nodig 3x PLC1 : KL1859 8x DI + 8x DO 3x PLC2 : KL9010 Potentiaal scheiding KL1859 8x DI + 8x DO
8 4x BC8150-controller (RTC Pick & Place basis) IEEE802.15.4 draadloze communicatie tussen de verschillende BC8150 PLCs Per communicatie zijn volgende modules nodig PLC1 tem 4 : 4x KM6551 IEEE802.15.4 draadloze communicatie PLC2 tem 4 : 4x ZS6201-0410 - Antenne
9 4x CX/CP-controller (Pick & Place optie) Digitale communicatie tussen de verschillende PLCs Per communicatie zijn volgende modules nodig PLC1 : EL1859 8x DI + 8x DO PLC2 : EL9100 Potentiaal scheiding EL1859 8x DI + 8x DO
10 4x CX/CP-controller (Pick & Place optie) ADS communicatie Op de bestaande PLCs is geen extra hardware nodig De communicatie verloopt op Ethernet niveau, hiervoor is een willekeurige netwerk router nodig, optioneel met WIFI (voor bedienen van een WebVisu) Programmatie WebVisu
11 Mix: 2x CX/CP-controller (Pick & Place optie) en 2x BC-controller (Pick & Place basis) ADS communicatie IEEE802.15.4 draadloze communicatie Digitale communicatie Programmatie WebVisu ADS IEEE802.15.4 Digitaal ADS IEEE802.15.4 Digitaal
12 Integreren veldbussen voor de industrie, domotica en theaterwereld in EtherCAT Voor de meeste veldbussen zijn er master en slave terminals beschikbaar Offerte op maat met scholenkorting
13 Contact Beckhoff Automation GmbH & Co. KG Headquarters Phone: +49 5246 963-0 Huelshorstweg 20 Fax: +49 5246 963-198 33415 Verl E-Mail: info@beckhoff.com Germany Web: www.beckhoff.com Beckhoff Automation bvba Hoofdzetel België Phone: +32 13 / 25 22 00 Klaverbladstraat 11B 2/2 Fax: +32 13 / 25 22 01 3560 Lummen E-Mail: info@beckhoff.be België Web: www.beckhoff.be Kantoor Kortrijk Phone: +32 56 / 20 20 37 President Kennedypark 6 bus 14 Fax: +32 13 / 25 22 01 8500 Kortrijk E-Mail: info@beckhoff.be België Web: www.beckhoff.be Beckhoff Automation GmbH & Co. KG All images are protected by copyright. The use and transfer to third parties is not permitted. Beckhoff, TwinCAT, EtherCAT, Safety over EtherCAT, TwinSAFE, XFC and XTS are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this presentation may be trademarks whose use by third parties for their own purposes could violate the rights of the owners. The information provided in this presentation contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.