Produkt-Datenblatt. Technische Daten, Spezifikationen. MEsstechnik fängt mit ME an. Kontakt

Transcriptie

1 Produkt-Datenblatt Technische Daten, Spezifikationen Kontakt Technischer und kaufmännischer Vertrieb, Preisauskünfte, Angebote, Test-Geräte, Beratung vor Ort: Tel: ( ) FAX: ( ) Aus dem Ausland: Tel: FAX: Internet: Web-Shop: Web Kontakt-Formular: Per Post: Meilhaus Electronic GmbH Am Sonnenlicht 2 D Alling bei München MEsstechnik fängt mit ME an. Erwähnte Firmen- und Produktnamen sind zum Teil eingetragene Warenzeichen der jeweiligen Hersteller. Preise in Euro zzgl. gesetzl. MwSt. Irrtum und Änderung vorbehalten. Meilhaus Electronic bzw. Hersteller.

2 WLg-IDA/S Wireless RS232 / RS422 / RS485 serial device server for factory automation Serial RS232 / RS422 / RS485 full duplex up to 250 Kbps 9-36 VDC wide range power supply IEEE a/b/g/h WiFi radio (2.4 / 5 GHz) Shock & vibration proof IP30 metal enclosure, DIN rail or panel mounting Point to Point (virtual cable) & multipoint modes, virtual COM port redirector (ViP) TCP Client / Server, UDP & MODBUS/TCP support C-KEY READY Top «C-KEY» for quick configuration, save & restore FAST ROAMING Introduction WLg-IDA/S gives access to any serial equipments from Windows, UNIX & Linux computers connected to your WiFi Ethernet TCP/IP network, makes it possible to communicate between two distant serial equipments through the network, or directly with a peer to peer connection (Ad-Hoc mode). WLg-IDA/S is designed for industrial and transportation applications, it can be used for material handling, real-time information transmission, and inventory management. The configuration of the device is achieved using the web browser installed on your computer; it also offers SNMP administration / configuration and an optional C-Key which allows quick and easy on-site replacement of the WLg-IDA/S unit, eliminating the need to reconfigure the replacement part or to use any other equipment. WLg-IDA/S fulfills the most severe requirements in terms of operating environment: operating temperature from -25 C to +70 C, shock and vibration proof according to MIL-STD-810F standard, IP30 seal rating.

3 Technical characteristics overview Serial Link RS signals available Cables connection WiFi network Radio data rate Channels Output power Full RS232 / 422 / 485 serial interface, 250 Kbps RS232 mode: TxD, RxD, RTS, DTR, CTS, DCD, DSR, RI RS422/485 mode: -Tx, +Tx, -Rx, +Rx (+RX and RX signals can be polarized with jumpers) SUB D9 male connector for RS signals, 5-point removable terminal block for RS422/485) Compliant to the IEEE a/b/g/h 2.4 / 5 GHz standards, multi-country Roaming support (IEEE d); Dynamic Frequency Selection (DFS) support provides flexible selection of best frequency to allow mobility among all existing IEEE a/b/g/h networks; «ClearVoice» band provides non-overlapping channels for fast-speed data transmission; Transmission Power Control (TPC) offers flexibility to adjust RF output power, based on the ATHEROS s AR5414 (AR5006XS) chip-set, single channel rapid roaming (<50 ms) Up to 108 Mbps (Super AG mode) 13 channels (b/g modes), 8 channels (a mode), 11 channels (h mode) Transmitter +20 dbm (TPC) Sensitivity Receiver 92 dbm for IEEE a/g and -95 dbm for IEEE b Antennas Modulation Security Modes Administration Operating systems Signaling Alarms Power supply Consumption Dimensions & weight Standards Environment Two 2 dbi bi-band external antennas, RP-SMA connector OFDM: BPSK, QPSK, 16QAM, 64QAM DSSS: DBPSK, DQPSK, CCK 64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS) Support for TCP Client/Server, DHCP Client, TELNET RFC2217 extension, Telnet Server, COM port re- director (VIP), multipoint or point to point virtual link over UDP modes and MODBUS/TCP Client/Server, MODBUS/RTU & MODBUS/ASCII protocols, direct communication (ad hoc) or from access point Thanks to its built-in WEB interface, the setup of the device is achieved using any web browser installed on your computer (Internet Explorer, Netscape, Mozilla...), SNMP agent, ACKSYS NDM, TELNET from the serial link Windows, Linux, UNIX as well as any operating system supporting TCP/IP Led display for power supplies, serial & WLAN activity, radio receive level Relay output warning: power failure, WLAN connection failure, Watchdog. 1 FORM B solid state relay, 60V 0.15A, contacts on removable clamp cage terminal Dual input, +9 to +36VDC 4.5 Watts typical Shock & vibration proof metal enclosure (L: 110 x W: 50 x H: 120 mm), 550 g MIL-STD-810F, & methods (shocks & vibrations) EN & EN (CEM) Operating temperature: -25 C to +70 C (-4 F to 158 F), storage: -65 C to +100 C (-85 F to 212 F), Humidity: 5% to 95% (non-condensing), IP 30 seal rating Ordering references WLg-IDA/S C-Key_M1 WLg-RF400MW WLg-FIX-PLQ Wireless RS232/RS422/RS485 device server over Ethernet IEEE a/b/g/h (WiFi 2.4 / 5 GHz), with Windows COM port redirector software (VIP), MODBUS/TCP data gateway, MODBUS/TCP gateway support, dual 9-36 VDC power supply, built- in antenna and additional RP-SMA connector for a second antenna (diversity mode) Save / Restore configuration key for the WLg-IDA/S High power radio option (26 dbm, 400 mw) Panel fixing metallic plate All the brand names mentioned in this document are trademarks. ACKSYS is constantly looking at ways to improve its products. The current specifications may therefore be modified without notice and the characteristics set out herein should not be construed as creating any contractual obligation. All the products featured herein are designed and manufactured in Europe.

4 WLg-IDA/N WiFi access point, 2-port Ethernet bridge & WDS repeater for industrial automation WiFi IEEE a/b/g/h & super AG, up to 108 Mbps Security : WEP, WPA-PSK, WPA2-PSK & IEEE 802.1x RADIUS Web based configuration, SNMP administration Auto-sensing 10/100 Base TX network interface PoE IEEE 802.3af or +9VDC to +36VDC dual redundant power supply input Shock & vibration proof IP30 metal enclosure, DIN rail or panel mounting C-KEY READY Top «C-KEY» for quick configuration, save & restore FAST ROAMING Introduction WLg-IDA/N features a WLAN interface coupled to a 2-port Ethernet 10/100 designed for harsh industrial environments and automotive applications. The unit is housed in a compact enclosure ready to be DIN rail or panel mounted. The device offers many switch technology advancements, including auto MDI/MDIX crossover for easy plug and play application. The configuration of the device is achieved using the web browser installed on your computer; it also offers SNMP administration / configuration and an optional C-Key which allows quick and easy on-site replacement of the WLg-IDA/N unit, eliminating the need to reconfigure the replacement part or to use any other equipment. WLg-IDA/N fulfills the most severe requirements in terms of operating environment: operating temperature from -25 C to +70 C, shock and vibration proof according to MIL-STD-810F standard, IP30 seal rating.

5 Technical characteristics overview Ethernet link WiFi network Data rate Channels Output power 2-port Ethernet 10/100 auto-sensing; RJ45 connectors; plug & play mode & auto MDI/MDIX cross-over Compliant to the IEEE a/b/g/h 2.4 / 5 / 5.4 GHz standards, multi-country roaming support (IEEE d); Dynamic Frequency Selection (DFS) support provides flexible selection of best frequency to allow mobility among all existing IEEE a/b/g/h networks; "ClearVoice" band provides non-overlapping channels for fast-speed data transmission; Transmission Power Control (TPC) offers flexibility to adjust RF output power, based on the ATHEROS AR5414 (AR5006XS) chip set Up to 108 Mbps (Super AG mode), TCP user data rate up to 44 Mbps 13 channels (b/g modes), 8 channels (a mode), 11 channels (h mode) Number of channels may vary depending on local laws. Transmitter +20 dbm (Optional 26 dbm) Sensitivity Receiver -92 dbm for IEEE a/g and -95 dbm for IEEE b Antenna Modulation Security Modes Administration Operating systems Protocols Signaling Alarms Power supply Consumption Dimensions & weight Standards Environment One 2dBi 2.4 / 5 GHz antenna (RP-SMA connector) + one RP-SMA connector for an additional antenna (diversity mode) OFDM: BPSK, QPSK, 16QAM, 64QAM, DSSS: DBPSK, DQPSK, CCK 64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS supplicant & authenticator), MAC addresses filtering, SSID broadcast control Access point to build a WiFi network infrastructure, bridge to connect any Ethernet equipments to this network and MODBUS/TCP wireless gateway, repeater (WDS), infrastructure, AD-HOC, bridge router & fast roaming (less than 50 ms) modes are supported Built-in WEB interface; SNMP V2c agent; ACKSYS NDM (Networking Device Manager). ACKSYS unique C-Key allows a quick and easy on-site replacement of the WLg-IDA unit, eliminating the need to reconfigure the replacement part or to use any other equipment (optional) Windows, Linux, UNIX as well as any operating system supporting TCP/IP Ethernet TCP/IP & UDP, MODBUS/TCP, Ethernet/IP, PROFINET Led display for power supplies, LAN on each port & WLAN activity, radio receive level Relay output warning: power failure, LAN or WLAN connection failure, Watchdog. 1 FORM B solid state relay, 60V 0.15A, contacts on removable clamp cage terminal PoE IEEE 802.3af or +9VDC to +36VDC dual redundant power supply input (removable clamp cage terminal) 4.5W typical Shock & vibration proof metal enclosure (L: 110 x W: 50 x H: 120 mm), 570 g MIL-STD-810F, & methods (shocks & vibrations) EN & EN (EMC) Operating temperature: -25 C to +70 C (-4 F to 158 F), storage: -65 C to +100 C (-85 F to 212 F), Humidity: 5% to 95% (non-condensing), IP 30 seal rating Ordering references WLg-IDA/N C-Key_M1 WLg-RF400MW WLg-FIX-PLQ CAB-RJ45-1M WiFi Access Point, 2-port Ethernet Bridge & WDS Repeater (a/b/g/h), PoE IEEE 802.3af or +9VDC to +36VDC dual redundant power supply input, shipped with 1 dual band 2 dbi omnidirectional (2.4 / 5 GHz) antenna and 1 meter of Ethernet RJ45 cable Save / Restore configuration key for the WLg-IDA/N High power radio option (26 dbm, 400 mw) Panel fixing metallic plate 1 meter Ethernet RJ45 cable, straight All the brand names mentioned in this document are trademarks. ACKSYS is constantly looking at ways to improve its products. The current specifications may therefore be modified without notice and the characteristics set out herein should not be construed as creating any contractual obligation. All the products featured herein are designed and manufactured in Europe.