INTERNATIONAL STANDARD Dessins techniques - Principes g&graux de reprbentation - Partie 2 7: Prbparation des traits par sys tkmes de CA0
|
|
- Mark ten Hart
- 5 jaren geleden
- Aantal bezoeken:
Transcriptie
1 NTERNATONAL STANDARD First edition Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This document may only be used on a stand-alone PC. Use in a network is only permitted when a supplementary license agreement for us in a network with NEN has been concluded. Technical drawings - General principles of presentation - Part 21: Preparation of lines by CAD systems Dessins techniques - Principes g&graux de reprbentation - Partie 2 7: Prbparation des traits par sys tkmes de CA0 Reference number S : 997(E)
2 S :1997(E) Foreword S0 (the nternational Organization for Standardization) is a worldwide federation of national standards bodies (S0 member bodies). The work of preparing nternational Standards is normally carried out through S0 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. nternational organizations, governmental and non-governmental, in liaison with SO, also take part in the work. S0 collaborates closely with the nternational Electrotechnical Commission (EC) on all matters of electrotechnical standardization. Draft nternational Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an nternational Standard requires approval by at least 75 % of the member bodies casting a vote. nternational Standard S was prepared by Technical Committee SOK 10, Technical drawings, product definition and related documentation, Subcommittee SC 1, Basic conventions. S0 128 consists of the following parts, under the general title Technical drawings - General principles of presentation: Part 20: Basic conventions for lines - Part 27: Preparation of lines by CAD systems Part 23: Lines on construction drawings Further parts of S0 128 are planned, covering other general principles of presentation including those for the application of lines within drawings of various technical fields. Annex A of this part of S0 128 is for information only. 0 S All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. nternational Organization for Standardization Case postale 56 l CH-1211 Geneve 20 l Switzerland nternet central@iso.ch x.400 c=ch; a=400net; p=iso; o=isocs; s=central Printed in Switzerland ii
3 @ S0 S0 128=21:1997(E) ntroduction Today the appearance of non-continuous lines on technical drawings prepared by computer-aided design (CAD) systems varies considerably between different systems. For that reason the standardized rules established by this nternational Standard, in addition to those in S , are intended as an aid for the consistent appearance of line elements calculated by computers and drawn by plotters.
4 This page intentionally left blank
5 NTERNATONAL S0 S0 128=21:1997(E) Technical drawings - General principles of presentation - Part 21: Preparation of lines by CAD systems 1 Scope This part of S0 128 specifies procedures for the calculation of the most important basic types of non-continuous lines according to S and their line elements. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this part of S At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of S0 128 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of EC and S0 maintain registers of currently valid nternational Standards. S : 1996, Technical drawings - General principles of presentation - Part 20: Basic conventions for lines. S0 5455: 1979, Technical drawings - Scales. 3 Definitions For the purposes of this part of S0 128 the definitions given in S apply. 4 Calculation of line elements 4.1 Line type No. 02 (dashed line) See figure 1 for the configuration of this type of line. 1
6 S0 S0 3d - (): Line segment 11 Figure 1 M EXAMPLE See figure 2. V 0 -- T -----mm-m T m- 1 Figure 2 Formulae: a) Length of the line: 11 = lo b) Number of line segments within the line: - 12d n =- 15d (rounded 1 c) Length of the dashes: l2 21-3dn Z n+l d) Minimum length of this line: 11 rnin = ZOmin = 27d (2 dashes 12d, 1 gap 3d) f dashed lines with a length less than 21 = 27d, have to be drawn, a larger scale from S shall be used (i.e. the elements are drawn at a larger scale). This line may be drawn with a constant longer dash. length of dashes (12d). n this case one end of the line may be a shorter or EXAMPLE 21 =25 d = 0,35 n= 125-4f2Q ,25 -, = , ,202 2
7 Bestelformulier Stuur naar: NEN Standards Products & Services t.a.v. afdeling Klantenservice Antwoordnummer WB Delft NEN Standards Products & Services Postbus GB Delft Vlinderweg AX Delft Ja, ik bestel ex. NEN-SO :1997 en Technische tekeningen - Algemene principes voor de weergave: Deel 21: Het tekenen van lijnen door CADsystemen T (015) F (015) Wilt u deze norm in PDF-formaat? Deze bestelt u eenvoudig via Gratis nieuwsbrieven Wilt u op de hoogte blijven van de laatste ontwikkelingen op het gebied van normen, normalisatie en regelgeving? Neem dan een gratis abonnement op een van onze nieuwsbrieven. Gegevens Bedrijf / nstelling T.a.v. O M O V Klantnummer NEN Uw ordernummer BTW nummer Postbus / Adres Postcode Plaats Telefoon Fax Factuuradres (indien dit afwijkt van bovenstaand adres) Postbus / Adres Postcode Plaats Datum Handtekening Retourneren Fax: klantenservice@nen.nl Post: NEN Standards Products & Services, t.a.v. afdeling Klantenservice Antwoordnummer 10214, 2600 WB Delft (geen postzegel nodig). Voorwaarden De prijzen zijn geldig tot 31 december 2018, tenzij anders aangegeven. Alle prijzen zijn excl. btw, verzend- en handelingskosten en onder voorbehoud bij o.m. SO- en EC-normen. Bestelt u via de normshop een pdf, dan betaalt u geen handeling en verzendkosten. Meer informatie: telefoon , dagelijks van 8.30 tot uur. Wijzigingen en typefouten in teksten en prijsinformatie voorbehouden. U kunt onze algemene voorwaarden terugvinden op: LEREN, WERKEN EN GROEEN MET NEN preview
Voorbeeld. Preview ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10202-8 First edition 1998-07-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoorbeeld. norm NEN-ISO Preview. Olie van Eucalyptus citriodora Hook (ISO 3044:1997) Nederlandse. Nederlands Normalisatie-instituut
Nederlandse norm NEN-ISO 3044 Olie van Eucalyptus citriodora Hook (ISO 3044:1997) Oil of Eucalyptus citriodora Hook (ISO 3044:1997) 2e druk, oktober 1997 ICS 71.100.60 Vervangt NEN-ISO 3044:1977 Als Nederlandse
Nadere informatieVoorbeeld. Preview ISO 5208 INTERNATIONAL STANDARD. Industrial valves - Pressure testing of valves
INTERNATIONAL STANDARD ISO 5208 Second edition 1993-01-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoorbeeld. Preview IS INTERNATIONAL STANDARD. Space data and information transfer systems - ASCII encoded English
INTERNATIONAL STANDARD IS0 14962 First edition 1997-12-15 Space data and information transfer systems - ASCII encoded English Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik
Nadere informatieVoorbeeld. Preview. Dit document is een voorbeeld van NEN / This document is a preview by NEN
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
Nadere informatieINTERNATIONAL STANDARD. Machine bridge reamers. Alésoirs de chaudronnerie, à machine
INTERNATIONAL STANDARD ISO 2238 Second edition 2011-08-15 Machine bridge reamers Alésoirs de chaudronnerie, à machine Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een
Nadere informatieVoorbeeld. norm NEN-ISO Preview
Nederlandse norm NEN-ISO 9224 Corrosie van metalen en legeringen Corrosiviteit van de atmosfeer - Richtwaarden voor de corrosiviteitscategorieèn (ISO 9224:1992) Corrosion of metals and alloys - Corrosivity
Nadere informatieVoorbeeld. Preview ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 2859-1 First edition 1999-11-15 AMENDMENT 1 2011-06-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een
Nadere informatieINTERNATIONAL STANDARD. Rolling bearings - Radial bearings with locating snap ring - Dimensions and tolerantes
INTERNATIONAL STANDARD ISO 464 Second edition 1995-05-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoorbeeld. Preview ISO 614 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 614 Fourth edition 2012-06-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoorbeeld. norm NEN-ISO Preview. Olie van Eucalyptus citriodora Hook (ISO 3044:1997) Nederlandse. Nederlands Normalisatie-instituut
Nederlandse norm NEN-ISO 3044 Olie van Eucalyptus citriodora Hook (ISO 3044:1997) Oil of Eucalyptus citriodora Hook (ISO 3044:1997) 2e druk, oktober 1997 ICS 71.100.60 Vervangt NEN-ISO 3044:1977 Als Nederlandse
Nadere informatieVoorbeeld. Preview. Steel and steel products Inspection documents. Aciers et produits sidérurgiques Documents de contrôle. Second edition
INTERNATIONAL STANDARD ISO 10474 Second edition 2013-07-01 Steel and steel products Inspection documents Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen.
Nadere informatieVoorbeeld. Preview. Implants for surgery Metallic skeletal pins and wires. Part 1: General requirements
INTERNATIONAL STANDARD ISO 5838-1 Third edition 2013-03-01 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoorbeeld. Preview INTERNATIONAL STANDARD ISO Glass containers Standard tolerances for bottles
INTERNATIONAL STANDARD ISO 9058 Second edition 2008-03-01 Glass containers Standard tolerances for bottles Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is
Nadere informatieVoorbeeld. Preview. NEN-ISO (en) Nederlandse. Dit document is een voorbeeld van NEN / This document is a preview by NEN
Nederlandse norm Technische productdocumentatie - Organisatie en benaming van lagen bij CAD - Deel 2: Concepten, opmaak en codes gebruikt in gebouwdocumentatie (ISO 13567-2:1998,IDT) NEN-ISO 13567-2 (en)
Nadere informatieVoorbeeld. Preview NEN-ISO Hydrauliek en pneumatiek. Driepolige contactstoppen met aardcontact. Karakteristieken en (ISO 4400:1994) Nederlandse
Nederlandse Hydrauliek en pneumatiek. Driepolige contactstoppen met aardcontact. Karakteristieken en eisen (ISO 4400:1994) NEN-ISO 4400 Fluid power systemsand components. Three-pin electrical plug connectors
Nadere informatieINTERNATIONAL STANDARD. Aéronautique et espace Filetage MJ Partie 2: Dimensions limites pour vis et écrous
INTERNATIONAL STANDARD ISO 5855-2 Third edition 1999-10-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoor de plaatsing van patrijspoorten in schepen is de internationale norm ISO 5780, Ie druk, 1987, als Nederlandse norm aanvaard.
UDC 629.12.011.83 Scheepsbouw - Patrijspoorten - Plaatsing NEN-ISO 5780 Shipbuilding - Side scuttles - Positioning le druk, september 1987 Voor de plaatsing van patrijspoorten in schepen is de internationale
Nadere informatieVoorbeeld NEN-ISO Preview. Hydrauliek en pneumatiek. Boringen en zuigerstangmiddellijnen van cilinders. Metrische reeks (ISO 3320:1987)
Nederlandse NEN-ISO 3320 Hydrauliek en pneumatiek. Boringen en zuigerstangmiddellijnen van cilinders. Metrische reeks (ISO 3320:1987) Fluid power systems and components. Cylinder bores and piston rod diameters.
Nadere informatieVoorbeeld. Preview ISO 9982 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 9982 Second edition 1998-06-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoorbeeld. Preview. Dit document is een voorbeeld van NEN / This document is a preview by NEN
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
Nadere informatieVoorbeeld. Preview NEN-ISO Dit document is een voorbeeld van NEN / This document is a preview by NEN. Nederlandse
Nederlandse NEN-ISO 11926-1 Leidingverbindingen voor hydraulische en pneumatische systemen en algemene toepassingen. Poorten en inschroefnippels voorzien van schroefdraad volgens ISO 725 voor gebruik met
Nadere informatieINTERNATIONAL STANDARD. Produits abrasifs agglomérés Dimensions Partie 8: Meules pour ébarbage et ébavurage
INTERNATIONAL STANDARD ISO 603-8 First edition 1999-07-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoorbeeld. norm NEN-ISO Preview. Pneumatiek - Identificatie van poorten en besturingsmechanismen van stuurventielen (ISO 11727:1999)
Nederlandse norm NEN-ISO 11727 Pneumatiek - Identificatie van poorten en besturingsmechanismen van stuurventielen en andere onderdelen (ISO 11727:1999) Pneumatic fluid power - Identification of ports and
Nadere informatieInternational Standard
International Standard 583711 INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWlEIK)(aYHAPO,WAR OPTAHM3ALlMR fl0 CTAHJ1APTbl3ALWl@ORGANISATION INTERNATIONALE DE NORMALISATtON Dit document mag slechts op
Nadere informatieINTERNATIONAL STANDARD Plain bearings - Copper alloy bushes. Paliers lisses -
NTERNATONAL STANDARD 4379 Second edition 1993-04-15 Corrected and reprinted 1995-07-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als
Nadere informatieINTERNATIONAL STANDARD Thread run-outs for fasteners with thread in accordance with IS0 261 and IS0 262
~~ NTERNATONAL STANDARD 3508 NTERNATONAL ORGANZATON FOR STANDARDZATON l EWiYHAPOllHAR OP-AHM3AUW no CTAH~APTH3AUMH.ORGANSATON NTERNATONALE DE NORMALSATON. Dit document mag slechts op een stand-alone PC
Nadere informatieIndustrial trucks operating in special conditions of stacking with mast tilted forward - Additional stability test september 1998 ICS 53.
Nederlandse norm NEN-ISO 5767 Transportwagens voor de industrie bedoeld om te stapelen met vooroverhellende geleider - Stabiliteitsproeven Industrial trucks operating in special conditions of stacking
Nadere informatieVoorbeeld. Preview NEN-EN Dit document is een voorbeeld van NEN / This document is a preview by NEN
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
Nadere informatieINTERNATIONAL ORGANIZATION FOR STANDARDlZATlON.ME~YHAPO~HAR OPl-AHM3AlJMR IlO INTERNATIONALE DE NORMALISATION
International Standard INTERNATIONAL ORGANIZATION FOR STANDARDlZATlON.ME~YHAPO~HAR OPl-AHM3AlJMR IlO CTAHAAPTM3ALWlM@ORGANlSATlON INTERNATIONALE DE NORMALISATION Dit document mag slechts op een stand-alone
Nadere informatieINTERNATIONAL ORGANIZATION FOR STANDARDIZATION.ME)I(C1YHAPOfiHAR OPrAHMJALWlR l-l0 CTAH~APTbl3AlWWORGANISATION INTERNATIONALE DE NORMALlSATlON
International Standard INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.ME)I(C1YHAPOfiHAR OPrAHMJALWlR l-l0 CTAH~APTbl3AlWWORGANISATION INTERNATIONALE DE NORMALlSATlON Dit document mag slechts op een stand-alone
Nadere informatieVoorbeeld. Preview ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 6474-2 First edition 2012-04-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoorbeeld. Preview ISO 603-16 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 603-16 First edition 1999-07-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoorbeeld. norm. Preview NEN-ISO 15267
Nederlandse norm Plantaardige en dierlijke oliën en vetten - Bepaling van het vlampunt met de methode met een gesloten kroes volgens Pensky-Martens (ISO 15267:1998) NEN-ISO 15267 Animal and vegetable fats
Nadere informatieTechnical drawings - General principles of presentation - Part 24: Lines on mechanical engineering drawing (ISO :1999) juni 1999 ICS
Nederlandse norm Technische tekeningen - Algemene principes voor de weergave - Deel 24: Lijnen op werktuigbouwkundige tekeningen (ISO 128-24:1999) NEN-ISO 128-24 Technical drawings - General principles
Nadere informatieVoorbeeld. Preview. N Nederlands. norm NEN-ISO 724. ISO-metrische schroefdraad voor algemene toepassing - Nominale maten (ISO 724:1993,IDT)
Nederlandse norm NEN-ISO 7 ISO-metrische schroefdraad voor algemene toepassing - Nominale maten (ISO 7:1993,IDT) ISO general-purpose metric screw threads - Basic dimensions (IS0 7:1993,IDT) maart 1999
Nadere informatieVoorbeeld. Preview. N Nederlands. norm NEN-ISO 724. ISO-metrische schroefdraad voor algemene toepassing - Nominale maten (ISO 724:1993,IDT)
Nederlandse norm NEN-ISO 72 ISO-metrische schroefdraad voor algemene toepassing - Nominale maten (ISO 72:1993,IDT) ISO general-purpose metric screw threads - Basic dimensions (IS0 72:1993,IDT) maart 1999
Nadere informatieVoorbeeld. norm Identification cards - Integrated circuit(s) cards with contacts - Part 1: Physical characteristics (ISO/IEC :1998,IDT) Preview
Nederlandse norm Identification cards - Integrated circuit(s) cards with contacts - Part 1: Physical characteristics (ISO/IEC 7816-1:1998,IDT) NEN-ISO/IEC 7816-1 (en) Vervangt NEN-ISO 7816-1:1989 oktober
Nadere informatieVoorbeeld. Preview ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10958-1 First edition 1998-06-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieLow voltage electrical installations - Part 6: Verification. Central Secretariat: rue de Stassart 35, B Brussels
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
Nadere informatieVoorbeeld. Preview ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 603-15 First edition 1999-07-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieNederlandse norm. NEN-ISO 16602/A1 (en)
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
Nadere informatieVervangt NEN-EN :2000 Ontw. Nederlandse norm. NEN-EN (en)
Vervangt NEN-EN 13920-10:2000 Ontw. Nederlandse norm Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoorbeeld. Preview. Technische tekeningen NEN-IS Vereenvoudigde tekenwijze van centergaten NEDERLANDSE NORM
UDC 62.229.324:744.4 Technische tekeningen Vereenvoudigde tekenwijze van centergaten Technical drawings - Simplified representation of centre holes NEDERLANDSE NORM NEN-S0 6411 ledruk, mei 1992 Onderwerp
Nadere informatieVoorbeeld. Preview ISO INTERNATIONAL STANDARD. Space systems Fluid characteristics Part 6: Monomethylhydrazine propellant
INTERNATIONAL STANDARD ISO 14951-6 First edition 1999-10-01 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoorbeeld NEN-ISO Preview
Nederlandse NEN-ISO 4183 Riemaandrijvingen. Klassieke en smalle V-riemen. Gegroefde riemschijven (systeem gebaseerd op de gegeven breedte) (ISO 4183:1995) Belt drives. Classical and narrow V-belts. Grooved
Nadere informatieNederlandse norm. NEN-ISO /A1 (en)
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
Nadere informatieINTERNATIONAL STANDARD NORME INTERNATIONALE. Urine absorbing aids - Vocabulary - Part I: Conditions of urinary incontinence
INTERNATIONAL STANDARD NORME INTERNATIONALE 9949-l First edition Premikre edition 1993-07-O 1 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan
Nadere informatieVoorbeeld. norm NEN-ISO Preview
Nederlandse norm NEN-ISO 11093-7 Papier en karton - Beproeven van kernen - Deel 7: Berekening van de buigingsmodulus met de driepuntsmethode (ISO 11093-7:1997) Paper and board - Testing of cores - Part
Nadere informatieVoorbeeld NËN : ISÖ3903. Preview. Nederlandse. Scheepsbouw en maritieme constructies. Gewone rechthoekige scheepsramen (ISO 3903:1993)
Nederlandse NËN : ISÖ3903 Scheepsbouw en maritieme constructies. Gewone rechthoekige scheepsramen (ISO 3903:1993) Shipbuilding and marine structures. Ships' ordinary rectangular windows 2e druk, april
Nadere informatieNederlandse voornorm NAD-NVN-ENV 1995-1-1. (nl)
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
Nadere informatieINTERNATIONAL STANDARD. Hot-rolled steel sections - Part 2 : Unequal-leg angles - Dimensions
INTERNATIONAL STANDARD IS0 657-2 First edition 1989-08-01 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoorbeeld. norm NEN-ISO Preview
Nederlandse norm NEN-ISO 3070-2 Beproeving van kotter- en freesmachines met een horizontale spil Beproeving van de nauwkeurigheid - Deel 2: Tafeluitvoering (ISO 3070-2:1997) Test conditions for boring
Nadere informatieNederlandse norm. NEN-ISO 16039/A1 (en)
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
Nadere informatieJustitiële Jeugdinrichtingen
Justitiële Jeugdinrichtingen eld be iew ev Pr or Vo Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoorbeeld. Preview. NEN-IEC /A2 (en; fr) Wijzigingsblad. Nederlandse
Nederlandse norm Meeraderige en symmetrische paar- /vierling-kabels voor digitale communicatie - Deel 3-1: Bekabeling op de werkplek - Raamspecificatie (IEC 61156-3-1:1995/A2:2001,IDT) Wijzigingsblad NEN-IEC
Nadere informatieVervangt NEN-EN :1997; NEN-EN :1999 Ontw. Nederlandse norm. NEN-EN (en)
Vervangt NEN-EN 1780-3:1997; NEN-EN 1780-3:1999 Ontw. Nederlandse norm Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende
Nadere informatieVervangt NEN 913:1963; NEN 913:1998 Ontw. Nederlandse norm. NEN 913 (nl) Melk en vloeibare melkproducten - Bepaling van de titreerbare zuurtegraad
Vervangt NEN 913:1963; NEN 913:1998 Ontw. Nederlandse norm Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoorbeeld. norm NEN-EN-ISO Preview. N Nederlands
Nederlandse norm NEN-EN-ISO 7854 Met rubber of kunststof bedekte weefsels - Bepaling van de weerstand tegen beschadiging door buigen (ISO 7854:1995) Rubber- or plastics-coated fabrics - Determination of
Nadere informatieAgricultural tractor drive wheel tyres - Method of measuring tyre rolling circumference (ISO 11795:1997) februari 1998 ICS
Nederlandse norm NEN-ISO 11795 Banden voor aandrijfwielen van trekkers voor land- en bosbouw - Methode voor de meting van de rolomtrek van de band (ISO 11795:1997) Agricultural tractor drive wheel tyres
Nadere informatieNederlands Normalisatie-instituut Polakweg 5, Postbus 5810, 2280 HV Rijswijk (ZH), telefoon (070) *, telex 32123, postrekening 25301
UDC 677.O76.73:001.1+ Visnetten - Bevestigen en verbinden van netwerk Benamingen en afbeeldinoen Fishinij ne Is - Mounting.n'j jcininy of netting - Terms and illustrations ra-ia) 3660 1e druk, juni 1978
Nadere informatieVoorbeeld. Preview HD S2
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
Nadere informatieVoorbeeld. Preview ISO INTERNATIONAL STANDARD. Technical product documentation (TPD) Dimensioning and indication of knurling
INTERNATIONAL STANDARD ISO 13444 First edition 2012-08-01 Technical product documentation (TPD) Dimensioning and indication of knurling Dit document mag slechts op een stand-alone PC worden geinstalleerd.
Nadere informatieScheepsbouw - Scheepsschroeven - Fabricagetoleranties - Deel 2: Schroeven met een middel lijn vanaf 0,8 m tot en met 2,5 m
UDC 629.12.037.1:621.753.1 Scheepsbouw - Scheepsschroeven - Fabricagetoleranties - Deel 2: Schroeven met een middel lijn vanaf 0,8 m tot en met 2,5 m Shipbuilding - Ship screw propellers - Manufacturing
Nadere informatieVoorbeeld. Preview INTERNATIONAL STANDARD. Cranes - Classification - Part 5: Overhead travelling and Portal bridge cranes
INTERNATIONAL STANDARD First edi tion 1991-09-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieIn relatie tot het Kwaliteitskader voorkomen seksueel misbruik in de Jeugzorg
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
Nadere informatieVoorbeeld NEN-ISO 728. Preview. Cokes (nominale grootste afmeting groter dan 20 mm). Grootteanalyse door zeven (ISO 728:1995) Nederlands
Nederlandse NEN-ISO 728 Cokes (nominale grootste afmeting groter dan 20 mm). Grootteanalyse door zeven (ISO 728:1995) Cokes (nominal top size greater than 20 mm). Size analysis by sieving (ISO 728:1995)
Nadere informatieVoorbeeld. Jeugdzorg. Preview. Addendum bij het HKZ-certificatieschema >
Voorbeeld Addendum bij het HKZ-certificatieschema > Jeugdzorg In relatie tot het Kwaliteitskader voorkomen seksueel misbruik in de jeugdzorg Dit document mag slechts op een stand-alone PC worden geinstalleerd.
Nadere informatieVoorbeeld. norm NEN-EN Preview. Ontwerp
Nederlandse Ontwerp norm NEN-EN 50471 Electromagnetic compatibility (EMC) - Product family emission standard for wireline telecommunication networks Publicatie uitsluitend voor commentaar Commentaar voor
Nadere informatieVoorbeeld. norm. Preview. NEN-ISO (en)
Nederlandse norm Water - Bepaling van het gehalte aan nitraat - Deel 3: Spectrometrische methode met zwavelsalicylzuur (ISO 7890-3:1988.IDT) NEN-ISO 7890-3 (en) Water quality - Determination of nitrate
Nadere informatieVervangt CR :1996; NEN-EN :2003 Ontw. Nederlandse norm. NEN-EN (en)
Vervangt CR 205-011:1996; NEN-EN 50090-7-1:2003 Ontw. Nederlandse norm Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende
Nadere informatieVoorbeeld. Preview. NEN-EN-ISO (en) Dit document is een voorbeeld van NEN / This document is a preview by NEN. Nederlandse
Nederlandse norm Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environments (ISO 12944-2:1998,IDT) NEN-EN-ISO 12944-2 (en) augustus
Nadere informatieBoormaten voor kerngaten van schroefdraad
UDC.88.07:.9:.99 nederlandse praktijkrichtlijn e druk, november 98 Boormaten voor kerngaten van schroefdraad Richtwaarden Tapping drill sizes Onderwerp Vervangt NEN 89 Dit document mag slechts op een stand-alone
Nadere informatieNederlandse norm. NEN-ISO 3065 (en)
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
Nadere informatieVoorbeeld. Preview. Kunststoffen. Leidraad voor het opstellen van beproevingsmethoden (ISO/TR 13883:1995)
Nederlandse NPR-ISO/TR 13883 Kunststoffen. Leidraad voor het opstellen van beproevingsmethoden (ISO/TR 13883:1995) Plastics. Guide to the writing of test methods (ISO/TR 13883:1995) 1e druk, augustus 1995
Nadere informatieNederlandse norm. NEN-EN (en)
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
Nadere informatie