INTERNATIONAL STANDARD. Rolling bearings - Radial bearings with locating snap ring - Dimensions and tolerantes

Maat: px
Weergave met pagina beginnen:

Download "INTERNATIONAL STANDARD. Rolling bearings - Radial bearings with locating snap ring - Dimensions and tolerantes"

Transcriptie

1 INTERNATIONAL STANDARD ISO 464 Second edition Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This document may only be used on a stand-alone PC. Use in a network is only permitted when a supplementary license agreement for us in a network with NEN has been concluded. Rolling bearings - Radial bearings with locating snap ring - Dimensions and tolerantes ßoulemen ts - ßoulements radiaux a segmen t d arr& - Dimensions et tokrances Reference number ISO 464:1995(E)

2 Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 464 was prepared by Technical Committee ISO/TC 4, ßolling bearings. This second edition cancels and replaces the first edition (ISO 464:1976), which has been technically revised. 0 ISO 1995 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronie or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Organization for Standardization Case Postale 56 l CH Geneve 20 l Switzerland Printed in Switzerland it

3 INTERNATIONAL STANDARD 0 ISO ISO 464:1995(E) Rolling bearings - Radial bearings with locating snap ring - Dimensions and tolerantes 1 Scope This International Standard specifies the snap ring groove dimensions, minimum chamfer dimensions on the snap ring groove side of the outer ring and the snap ring dimensions for radial bearings in dimension series 18 and 19 and diameter series 0, 2, 3 and 4 (except dimension series 00, 82 and 83), as specified in ISO Normative references The following Standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All Standards are subject to revision, and Parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the Standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 15: 1981, ßolling bearings - Radial bearings - Boundaty dimensions - General plan. ISO 582:1995, ßolling bearings - Chamfer dimensions - Maximum values. 3 Symbols and dimensions See figure 1 and tables 1 to 5. The dimensions given in tables 1 to 5 corresponding to the Symbols shown in figure 1 are nominal dimensions unless specified otherwise. 1

4 Cl 8 -- _- NOTE - For minimum chamfer dimensions, see table 5. D = outside diameter of bearing D, = snap ring groove diameter D, = outside diameter of snap ring, when mounted D, = inside diameter of snap ring, before mounting ro = fillet radius at bottom of snap ring groove r ls = Single chamfer dimension of outer ring on snap ring groove side a = snap ring groove location h = snap ring groove width e = snap ring section height.f= snap ring thickness 8 = snap ring gap, when mounted Figure 1 - Rolling bearing with locating snap mg

5 (Page blanche)

6 3.1 Dimension series 18 and 19 Table 1 - Snap ring groove dimensions in millimetres D 4 min. Dimension series a min. min ,8 20, ,8 22, ,7 26,4 1,30 1, ,7 28, ,7 30, ,7 32, ,7 35, ,7 37, ,7 38, ,7 40, ,7 42, ,7 43, ,7 45, ,7 50, ,7 53, ,7 56, ,7 60, ,7 63, ,7 66, ,7 70, ,2 75, ,9 77, ,9 82, ,9 87, ,9 92, ,9 97, ,6 102,l ,6 107,l ,6 112,l ,6 117,l 1,30 1,15 1,30 " Ar - I 4 r\n I,3u 1,30 1,55 1,55 1,30 1,15 1,30 1,15 1,55 1,30 1,15 1,55 1,30 1,15 1,55 1,30 1,15 1,55 1,55 1; 1 ;; / 1,55 I,3u I,l3 I 1 1 1,55 1,55 1,55 1,55 1,55 1,55 Tl 13 2,5 2,3 01 n Lt 1 I 1,y I - I - Zl lt9 3,3 3,l h Dimensions min. ro 1, ,05 W ,g 1,6 lt3 04 Zl 13 lt6 lt3 0,4 Zl lt9 18 lt3 0,4 W lt lt3 0,4 116 lt lt3 0,4 1,6 lt3 0,4 16 lt ,6 122,l Zl ,l 116 lt ,6 127,l Zl 13 3,3 3,l L6 lt3 0, ,6 137,l 2,5 2,3 3,3 3,l ,6 142,l ,6 147,l ,8 161, ,8 171, ,8 176, ,8 186, ,8 196,3 3,3 3,l 2,5 2,3 3,3 3,l 313 3,l 3,7 3, , Q

7 Bestelformulier Stuur naar: NEN Standards Products & Services t.a.v. afdeling Klantenservice Antwoordnummer WB Delft Ja, ik bestel NEN Standards Products & Services Postbus GB Delft Vlinderweg AX Delft T (015) F (015) ex. ISO 464:1995 en Rolling bearings - Radial bearings with locating snap ring - Dimensions and tolerances Wilt u deze norm in PDF-formaat? Deze bestelt u eenvoudig via Gratis nieuwsbrieven Wilt u op de hoogte blijven van de laatste ontwikkelingen op het gebied van normen, normalisatie en regelgeving? Neem dan een gratis abonnement op een van onze nieuwsbrieven. Gegevens Bedrijf / Instelling T.a.v. O M O V Klantnummer NEN Uw ordernummer BTW nummer Postbus / Adres Postcode Plaats Telefoon Fax Factuuradres (indien dit afwijkt van bovenstaand adres) Postbus / Adres Postcode Plaats Datum Handtekening Retourneren Fax: (015) klantenservice@nen.nl Post: NEN Standards Products & Services, t.a.v. afdeling Klantenservice Antwoordnummer 10214, 2600 WB Delft (geen postzegel nodig). Voorwaarden De prijzen zijn geldig tot 31 december 2016, tenzij anders aangegeven. Alle prijzen zijn excl. btw, verzend- en handelingskosten en onder voorbehoud bij o.m. ISO- en IEC-normen. Bestelt u via de normshop een pdf, dan betaalt u geen handeling en verzendkosten. Meer informatie: telefoon (015) , dagelijks van 8.30 tot uur. Wijzigingen en typefouten in teksten en prijsinformatie voorbehouden. U kunt onze algemene voorwaarden terugvinden op: Normalisatie: de wereld op één lijn. preview

Voorbeeld. Preview. Dit document is een voorbeeld van NEN / This document is a preview by NEN

Voorbeeld. Preview. Dit document is een voorbeeld van NEN / This document is a preview by NEN Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This

Nadere informatie

Voorbeeld. Preview ISO 5208 INTERNATIONAL STANDARD. Industrial valves - Pressure testing of valves

Voorbeeld. Preview ISO 5208 INTERNATIONAL STANDARD. Industrial valves - Pressure testing of valves INTERNATIONAL STANDARD ISO 5208 Second edition 1993-01-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst

Nadere informatie

Voorbeeld. norm NEN-ISO Preview. Olie van Eucalyptus citriodora Hook (ISO 3044:1997) Nederlandse. Nederlands Normalisatie-instituut

Voorbeeld. norm NEN-ISO Preview. Olie van Eucalyptus citriodora Hook (ISO 3044:1997) Nederlandse. Nederlands Normalisatie-instituut Nederlandse norm NEN-ISO 3044 Olie van Eucalyptus citriodora Hook (ISO 3044:1997) Oil of Eucalyptus citriodora Hook (ISO 3044:1997) 2e druk, oktober 1997 ICS 71.100.60 Vervangt NEN-ISO 3044:1977 Als Nederlandse

Nadere informatie

Voorbeeld. Preview ISO INTERNATIONAL STANDARD

Voorbeeld. Preview ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 10202-8 First edition 1998-07-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst

Nadere informatie

INTERNATIONAL STANDARD. Machine bridge reamers. Alésoirs de chaudronnerie, à machine

INTERNATIONAL STANDARD. Machine bridge reamers. Alésoirs de chaudronnerie, à machine INTERNATIONAL STANDARD ISO 2238 Second edition 2011-08-15 Machine bridge reamers Alésoirs de chaudronnerie, à machine Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een

Nadere informatie

Voorbeeld. norm NEN-ISO Preview

Voorbeeld. norm NEN-ISO Preview Nederlandse norm NEN-ISO 9224 Corrosie van metalen en legeringen Corrosiviteit van de atmosfeer - Richtwaarden voor de corrosiviteitscategorieèn (ISO 9224:1992) Corrosion of metals and alloys - Corrosivity

Nadere informatie

Voorbeeld. Preview IS INTERNATIONAL STANDARD. Space data and information transfer systems - ASCII encoded English

Voorbeeld. Preview IS INTERNATIONAL STANDARD. Space data and information transfer systems - ASCII encoded English INTERNATIONAL STANDARD IS0 14962 First edition 1997-12-15 Space data and information transfer systems - ASCII encoded English Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik

Nadere informatie

Voorbeeld. Preview ISO INTERNATIONAL STANDARD

Voorbeeld. Preview ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 2859-1 First edition 1999-11-15 AMENDMENT 1 2011-06-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een

Nadere informatie

Voorbeeld. Preview ISO 614 INTERNATIONAL STANDARD

Voorbeeld. Preview ISO 614 INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 614 Fourth edition 2012-06-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst

Nadere informatie

Voorbeeld NEN-ISO Preview. Hydrauliek en pneumatiek. Boringen en zuigerstangmiddellijnen van cilinders. Metrische reeks (ISO 3320:1987)

Voorbeeld NEN-ISO Preview. Hydrauliek en pneumatiek. Boringen en zuigerstangmiddellijnen van cilinders. Metrische reeks (ISO 3320:1987) Nederlandse NEN-ISO 3320 Hydrauliek en pneumatiek. Boringen en zuigerstangmiddellijnen van cilinders. Metrische reeks (ISO 3320:1987) Fluid power systems and components. Cylinder bores and piston rod diameters.

Nadere informatie

Voorbeeld. Preview INTERNATIONAL STANDARD ISO Glass containers Standard tolerances for bottles

Voorbeeld. Preview INTERNATIONAL STANDARD ISO Glass containers Standard tolerances for bottles INTERNATIONAL STANDARD ISO 9058 Second edition 2008-03-01 Glass containers Standard tolerances for bottles Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is

Nadere informatie

Voorbeeld. Preview ISO 9982 INTERNATIONAL STANDARD

Voorbeeld. Preview ISO 9982 INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 9982 Second edition 1998-06-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst

Nadere informatie

INTERNATIONAL STANDARD. Aéronautique et espace Filetage MJ Partie 2: Dimensions limites pour vis et écrous

INTERNATIONAL STANDARD. Aéronautique et espace Filetage MJ Partie 2: Dimensions limites pour vis et écrous INTERNATIONAL STANDARD ISO 5855-2 Third edition 1999-10-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst

Nadere informatie

Voorbeeld. Preview. Implants for surgery Metallic skeletal pins and wires. Part 1: General requirements

Voorbeeld. Preview. Implants for surgery Metallic skeletal pins and wires. Part 1: General requirements INTERNATIONAL STANDARD ISO 5838-1 Third edition 2013-03-01 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst

Nadere informatie

Voorbeeld. Preview. Steel and steel products Inspection documents. Aciers et produits sidérurgiques Documents de contrôle. Second edition

Voorbeeld. Preview. Steel and steel products Inspection documents. Aciers et produits sidérurgiques Documents de contrôle. Second edition INTERNATIONAL STANDARD ISO 10474 Second edition 2013-07-01 Steel and steel products Inspection documents Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen.

Nadere informatie

Voorbeeld. norm NEN-ISO Preview. Olie van Eucalyptus citriodora Hook (ISO 3044:1997) Nederlandse. Nederlands Normalisatie-instituut

Voorbeeld. norm NEN-ISO Preview. Olie van Eucalyptus citriodora Hook (ISO 3044:1997) Nederlandse. Nederlands Normalisatie-instituut Nederlandse norm NEN-ISO 3044 Olie van Eucalyptus citriodora Hook (ISO 3044:1997) Oil of Eucalyptus citriodora Hook (ISO 3044:1997) 2e druk, oktober 1997 ICS 71.100.60 Vervangt NEN-ISO 3044:1977 Als Nederlandse

Nadere informatie

INTERNATIONAL STANDARD Plain bearings - Copper alloy bushes. Paliers lisses -

INTERNATIONAL STANDARD Plain bearings - Copper alloy bushes. Paliers lisses - NTERNATONAL STANDARD 4379 Second edition 1993-04-15 Corrected and reprinted 1995-07-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als

Nadere informatie

Voorbeeld. Preview NEN-ISO Hydrauliek en pneumatiek. Driepolige contactstoppen met aardcontact. Karakteristieken en (ISO 4400:1994) Nederlandse

Voorbeeld. Preview NEN-ISO Hydrauliek en pneumatiek. Driepolige contactstoppen met aardcontact. Karakteristieken en (ISO 4400:1994) Nederlandse Nederlandse Hydrauliek en pneumatiek. Driepolige contactstoppen met aardcontact. Karakteristieken en eisen (ISO 4400:1994) NEN-ISO 4400 Fluid power systemsand components. Three-pin electrical plug connectors

Nadere informatie

International Standard

International Standard International Standard 583711 INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWlEIK)(aYHAPO,WAR OPTAHM3ALlMR fl0 CTAHJ1APTbl3ALWl@ORGANISATION INTERNATIONALE DE NORMALISATtON Dit document mag slechts op

Nadere informatie

INTERNATIONAL STANDARD. Produits abrasifs agglomérés Dimensions Partie 8: Meules pour ébarbage et ébavurage

INTERNATIONAL STANDARD. Produits abrasifs agglomérés Dimensions Partie 8: Meules pour ébarbage et ébavurage INTERNATIONAL STANDARD ISO 603-8 First edition 1999-07-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst

Nadere informatie

Voor de plaatsing van patrijspoorten in schepen is de internationale norm ISO 5780, Ie druk, 1987, als Nederlandse norm aanvaard.

Voor de plaatsing van patrijspoorten in schepen is de internationale norm ISO 5780, Ie druk, 1987, als Nederlandse norm aanvaard. UDC 629.12.011.83 Scheepsbouw - Patrijspoorten - Plaatsing NEN-ISO 5780 Shipbuilding - Side scuttles - Positioning le druk, september 1987 Voor de plaatsing van patrijspoorten in schepen is de internationale

Nadere informatie

INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.ME)I(C1YHAPOfiHAR OPrAHMJALWlR l-l0 CTAH~APTbl3AlWWORGANISATION INTERNATIONALE DE NORMALlSATlON

INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.ME)I(C1YHAPOfiHAR OPrAHMJALWlR l-l0 CTAH~APTbl3AlWWORGANISATION INTERNATIONALE DE NORMALlSATlON International Standard INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.ME)I(C1YHAPOfiHAR OPrAHMJALWlR l-l0 CTAH~APTbl3AlWWORGANISATION INTERNATIONALE DE NORMALlSATlON Dit document mag slechts op een stand-alone

Nadere informatie

Voorbeeld NEN-ISO Preview

Voorbeeld NEN-ISO Preview Nederlandse NEN-ISO 4183 Riemaandrijvingen. Klassieke en smalle V-riemen. Gegroefde riemschijven (systeem gebaseerd op de gegeven breedte) (ISO 4183:1995) Belt drives. Classical and narrow V-belts. Grooved

Nadere informatie

Industrial trucks operating in special conditions of stacking with mast tilted forward - Additional stability test september 1998 ICS 53.

Industrial trucks operating in special conditions of stacking with mast tilted forward - Additional stability test september 1998 ICS 53. Nederlandse norm NEN-ISO 5767 Transportwagens voor de industrie bedoeld om te stapelen met vooroverhellende geleider - Stabiliteitsproeven Industrial trucks operating in special conditions of stacking

Nadere informatie

Voorbeeld. Preview. N Nederlands. norm NEN-ISO 724. ISO-metrische schroefdraad voor algemene toepassing - Nominale maten (ISO 724:1993,IDT)

Voorbeeld. Preview. N Nederlands. norm NEN-ISO 724. ISO-metrische schroefdraad voor algemene toepassing - Nominale maten (ISO 724:1993,IDT) Nederlandse norm NEN-ISO 7 ISO-metrische schroefdraad voor algemene toepassing - Nominale maten (ISO 7:1993,IDT) ISO general-purpose metric screw threads - Basic dimensions (IS0 7:1993,IDT) maart 1999

Nadere informatie

Voorbeeld. Preview. N Nederlands. norm NEN-ISO 724. ISO-metrische schroefdraad voor algemene toepassing - Nominale maten (ISO 724:1993,IDT)

Voorbeeld. Preview. N Nederlands. norm NEN-ISO 724. ISO-metrische schroefdraad voor algemene toepassing - Nominale maten (ISO 724:1993,IDT) Nederlandse norm NEN-ISO 72 ISO-metrische schroefdraad voor algemene toepassing - Nominale maten (ISO 72:1993,IDT) ISO general-purpose metric screw threads - Basic dimensions (IS0 72:1993,IDT) maart 1999

Nadere informatie

INTERNATIONAL STANDARD Dessins techniques - Principes g&graux de reprbentation - Partie 2 7: Prbparation des traits par sys tkmes de CA0

INTERNATIONAL STANDARD Dessins techniques - Principes g&graux de reprbentation - Partie 2 7: Prbparation des traits par sys tkmes de CA0 NTERNATONAL STANDARD 128-21 First edition 1997-03-01 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst

Nadere informatie

Voorbeeld. Preview NEN-EN Dit document is een voorbeeld van NEN / This document is a preview by NEN

Voorbeeld. Preview NEN-EN Dit document is een voorbeeld van NEN / This document is a preview by NEN Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This

Nadere informatie

Voorbeeld. norm NEN-ISO Preview. Pneumatiek - Identificatie van poorten en besturingsmechanismen van stuurventielen (ISO 11727:1999)

Voorbeeld. norm NEN-ISO Preview. Pneumatiek - Identificatie van poorten en besturingsmechanismen van stuurventielen (ISO 11727:1999) Nederlandse norm NEN-ISO 11727 Pneumatiek - Identificatie van poorten en besturingsmechanismen van stuurventielen en andere onderdelen (ISO 11727:1999) Pneumatic fluid power - Identification of ports and

Nadere informatie

Voorbeeld. Preview ISO 603-16 INTERNATIONAL STANDARD

Voorbeeld. Preview ISO 603-16 INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 603-16 First edition 1999-07-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst

Nadere informatie

Voorbeeld. Preview NEN-ISO Dit document is een voorbeeld van NEN / This document is a preview by NEN. Nederlandse

Voorbeeld. Preview NEN-ISO Dit document is een voorbeeld van NEN / This document is a preview by NEN. Nederlandse Nederlandse NEN-ISO 11926-1 Leidingverbindingen voor hydraulische en pneumatische systemen en algemene toepassingen. Poorten en inschroefnippels voorzien van schroefdraad volgens ISO 725 voor gebruik met

Nadere informatie

INTERNATIONAL STANDARD. Hot-rolled steel sections - Part 2 : Unequal-leg angles - Dimensions

INTERNATIONAL STANDARD. Hot-rolled steel sections - Part 2 : Unequal-leg angles - Dimensions INTERNATIONAL STANDARD IS0 657-2 First edition 1989-08-01 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst

Nadere informatie

Voorbeeld. Preview. Dit document is een voorbeeld van NEN / This document is a preview by NEN

Voorbeeld. Preview. Dit document is een voorbeeld van NEN / This document is a preview by NEN Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This

Nadere informatie

INTERNATIONAL ORGANIZATION FOR STANDARDlZATlON.ME~YHAPO~HAR OPl-AHM3AlJMR IlO INTERNATIONALE DE NORMALISATION

INTERNATIONAL ORGANIZATION FOR STANDARDlZATlON.ME~YHAPO~HAR OPl-AHM3AlJMR IlO INTERNATIONALE DE NORMALISATION International Standard INTERNATIONAL ORGANIZATION FOR STANDARDlZATlON.ME~YHAPO~HAR OPl-AHM3AlJMR IlO CTAHAAPTM3ALWlM@ORGANlSATlON INTERNATIONALE DE NORMALISATION Dit document mag slechts op een stand-alone

Nadere informatie

Voorbeeld. norm. Preview NEN-ISO 15267

Voorbeeld. norm. Preview NEN-ISO 15267 Nederlandse norm Plantaardige en dierlijke oliën en vetten - Bepaling van het vlampunt met de methode met een gesloten kroes volgens Pensky-Martens (ISO 15267:1998) NEN-ISO 15267 Animal and vegetable fats

Nadere informatie

Low voltage electrical installations - Part 6: Verification. Central Secretariat: rue de Stassart 35, B Brussels

Low voltage electrical installations - Part 6: Verification. Central Secretariat: rue de Stassart 35, B Brussels Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This

Nadere informatie

Voorbeeld. norm NEN-EN-ISO Preview. N Nederlands

Voorbeeld. norm NEN-EN-ISO Preview. N Nederlands Nederlandse norm NEN-EN-ISO 7854 Met rubber of kunststof bedekte weefsels - Bepaling van de weerstand tegen beschadiging door buigen (ISO 7854:1995) Rubber- or plastics-coated fabrics - Determination of

Nadere informatie

Voorbeeld NEN-ISO 728. Preview. Cokes (nominale grootste afmeting groter dan 20 mm). Grootteanalyse door zeven (ISO 728:1995) Nederlands

Voorbeeld NEN-ISO 728. Preview. Cokes (nominale grootste afmeting groter dan 20 mm). Grootteanalyse door zeven (ISO 728:1995) Nederlands Nederlandse NEN-ISO 728 Cokes (nominale grootste afmeting groter dan 20 mm). Grootteanalyse door zeven (ISO 728:1995) Cokes (nominal top size greater than 20 mm). Size analysis by sieving (ISO 728:1995)

Nadere informatie

Scheepsbouw - Scheepsschroeven - Fabricagetoleranties - Deel 2: Schroeven met een middel lijn vanaf 0,8 m tot en met 2,5 m

Scheepsbouw - Scheepsschroeven - Fabricagetoleranties - Deel 2: Schroeven met een middel lijn vanaf 0,8 m tot en met 2,5 m UDC 629.12.037.1:621.753.1 Scheepsbouw - Scheepsschroeven - Fabricagetoleranties - Deel 2: Schroeven met een middel lijn vanaf 0,8 m tot en met 2,5 m Shipbuilding - Ship screw propellers - Manufacturing

Nadere informatie

Voorbeeld. Preview. NEN-ISO (en) Nederlandse. Dit document is een voorbeeld van NEN / This document is a preview by NEN

Voorbeeld. Preview. NEN-ISO (en) Nederlandse. Dit document is een voorbeeld van NEN / This document is a preview by NEN Nederlandse norm Technische productdocumentatie - Organisatie en benaming van lagen bij CAD - Deel 2: Concepten, opmaak en codes gebruikt in gebouwdocumentatie (ISO 13567-2:1998,IDT) NEN-ISO 13567-2 (en)

Nadere informatie

Voorbeeld. Preview ISO INTERNATIONAL STANDARD

Voorbeeld. Preview ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 603-15 First edition 1999-07-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst

Nadere informatie

INTERNATIONAL STANDARD Thread run-outs for fasteners with thread in accordance with IS0 261 and IS0 262

INTERNATIONAL STANDARD Thread run-outs for fasteners with thread in accordance with IS0 261 and IS0 262 ~~ NTERNATONAL STANDARD 3508 NTERNATONAL ORGANZATON FOR STANDARDZATON l EWiYHAPOllHAR OP-AHM3AUW no CTAH~APTH3AUMH.ORGANSATON NTERNATONALE DE NORMALSATON. Dit document mag slechts op een stand-alone PC

Nadere informatie

Voorbeeld. Preview ISO INTERNATIONAL STANDARD

Voorbeeld. Preview ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 10958-1 First edition 1998-06-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst

Nadere informatie

Voorbeeld. norm NEN-ISO Preview

Voorbeeld. norm NEN-ISO Preview Nederlandse norm NEN-ISO 3070-2 Beproeving van kotter- en freesmachines met een horizontale spil Beproeving van de nauwkeurigheid - Deel 2: Tafeluitvoering (ISO 3070-2:1997) Test conditions for boring

Nadere informatie

Voorbeeld. Preview ISO INTERNATIONAL STANDARD

Voorbeeld. Preview ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 6474-2 First edition 2012-04-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst

Nadere informatie

Voorbeeld NËN : ISÖ3903. Preview. Nederlandse. Scheepsbouw en maritieme constructies. Gewone rechthoekige scheepsramen (ISO 3903:1993)

Voorbeeld NËN : ISÖ3903. Preview. Nederlandse. Scheepsbouw en maritieme constructies. Gewone rechthoekige scheepsramen (ISO 3903:1993) Nederlandse NËN : ISÖ3903 Scheepsbouw en maritieme constructies. Gewone rechthoekige scheepsramen (ISO 3903:1993) Shipbuilding and marine structures. Ships' ordinary rectangular windows 2e druk, april

Nadere informatie

Nederlands Normalisatie-instituut Polakweg 5, Postbus 5810, 2280 HV Rijswijk (ZH), telefoon (070) *, telex 32123, postrekening 25301

Nederlands Normalisatie-instituut Polakweg 5, Postbus 5810, 2280 HV Rijswijk (ZH), telefoon (070) *, telex 32123, postrekening 25301 UDC 677.O76.73:001.1+ Visnetten - Bevestigen en verbinden van netwerk Benamingen en afbeeldinoen Fishinij ne Is - Mounting.n'j jcininy of netting - Terms and illustrations ra-ia) 3660 1e druk, juni 1978

Nadere informatie

Voorbeeld. norm Identification cards - Integrated circuit(s) cards with contacts - Part 1: Physical characteristics (ISO/IEC :1998,IDT) Preview

Voorbeeld. norm Identification cards - Integrated circuit(s) cards with contacts - Part 1: Physical characteristics (ISO/IEC :1998,IDT) Preview Nederlandse norm Identification cards - Integrated circuit(s) cards with contacts - Part 1: Physical characteristics (ISO/IEC 7816-1:1998,IDT) NEN-ISO/IEC 7816-1 (en) Vervangt NEN-ISO 7816-1:1989 oktober

Nadere informatie

Voorbeeld. Preview HD S2

Voorbeeld. Preview HD S2 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This

Nadere informatie

Voorbeeld. Preview NEN-EN-ISO Verzonken schroeven met platte kop met zaaggleuf (met eenheidskop). Produktklasse A (ISO 2009:1994) Nederlandse

Voorbeeld. Preview NEN-EN-ISO Verzonken schroeven met platte kop met zaaggleuf (met eenheidskop). Produktklasse A (ISO 2009:1994) Nederlandse Nederlandse Verzonken schroeven met platte kop met zaaggleuf (met eenheidskop). Produktklasse A (ISO 2009:1994) NEN-EN-ISO 2009 EN ISO 2009 Slotted countersunk flat head screws (common head style). Product

Nadere informatie

Voorbeeld. Preview INTERNATIONAL STANDARD ISO 255. Belt drives - Pulleys for V-belts (System based on datum width) - Geometrical inspection of grooves

Voorbeeld. Preview INTERNATIONAL STANDARD ISO 255. Belt drives - Pulleys for V-belts (System based on datum width) - Geometrical inspection of grooves INTERNATIONAL STANDARD ISO 255 Second edi tion 1990-11-01 - Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst

Nadere informatie

Justitiële Jeugdinrichtingen

Justitiële Jeugdinrichtingen Justitiële Jeugdinrichtingen eld be iew ev Pr or Vo Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst

Nadere informatie

Voorbeeld INTERNATIONAL STANDARD Preview. Tangential keys and keyways. First edition UDC Ref. No.

Voorbeeld INTERNATIONAL STANDARD Preview. Tangential keys and keyways. First edition UDC Ref. No. INTERNATIONAL STANDARD 3117 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXAYHAPOAHAR OPl-AHM3ALWV.I l-io ctahaaptm3alwi.organisatlon INTERNATIONALE DE NORMALISATION Dit document mag slechts op een

Nadere informatie

Nederlandse norm. NEN-ISO 3065 (en)

Nederlandse norm. NEN-ISO 3065 (en) Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This

Nadere informatie

Nederlandse norm. NEN-ISO 16602/A1 (en)

Nederlandse norm. NEN-ISO 16602/A1 (en) Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This

Nadere informatie

Vervangt NEN-EN :2000 Ontw. Nederlandse norm. NEN-EN (en)

Vervangt NEN-EN :2000 Ontw. Nederlandse norm. NEN-EN (en) Vervangt NEN-EN 13920-10:2000 Ontw. Nederlandse norm Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst

Nadere informatie

Voorbeeld. Preview INTERNATIONAL STANDARD. Cranes - Classification - Part 5: Overhead travelling and Portal bridge cranes

Voorbeeld. Preview INTERNATIONAL STANDARD. Cranes - Classification - Part 5: Overhead travelling and Portal bridge cranes INTERNATIONAL STANDARD First edi tion 1991-09-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst

Nadere informatie

In relatie tot het Kwaliteitskader voorkomen seksueel misbruik in de Jeugzorg

In relatie tot het Kwaliteitskader voorkomen seksueel misbruik in de Jeugzorg Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This

Nadere informatie

Voorbeeld. Jeugdzorg. Preview. Addendum bij het HKZ-certificatieschema >

Voorbeeld. Jeugdzorg. Preview. Addendum bij het HKZ-certificatieschema > Voorbeeld Addendum bij het HKZ-certificatieschema > Jeugdzorg In relatie tot het Kwaliteitskader voorkomen seksueel misbruik in de jeugdzorg Dit document mag slechts op een stand-alone PC worden geinstalleerd.

Nadere informatie

Nederlandse norm. NEN-ISO /A1 (en)

Nederlandse norm. NEN-ISO /A1 (en) Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This

Nadere informatie

Brown coals and lignites - Determination of humic acids (ISO5073:1999,IDT) januari 2000 ICS

Brown coals and lignites - Determination of humic acids (ISO5073:1999,IDT) januari 2000 ICS Nederlandse norm NEN-ISO 5073 (en) Bruinkool en ligniet - Bepaling van humuszuren (ISO 5073:1999,IDT) Brown coals and lignites - Determination of humic acids (ISO5073:1999,IDT) januari 2000 ICS 73.040

Nadere informatie

Boormaten voor kerngaten van schroefdraad

Boormaten voor kerngaten van schroefdraad UDC.88.07:.9:.99 nederlandse praktijkrichtlijn e druk, november 98 Boormaten voor kerngaten van schroefdraad Richtwaarden Tapping drill sizes Onderwerp Vervangt NEN 89 Dit document mag slechts op een stand-alone

Nadere informatie

Voorbeeld. Preview. NEN-IEC /A2 (en; fr) Wijzigingsblad. Nederlandse

Voorbeeld. Preview. NEN-IEC /A2 (en; fr) Wijzigingsblad. Nederlandse Nederlandse norm Meeraderige en symmetrische paar- /vierling-kabels voor digitale communicatie - Deel 3-1: Bekabeling op de werkplek - Raamspecificatie (IEC 61156-3-1:1995/A2:2001,IDT) Wijzigingsblad NEN-IEC

Nadere informatie

Vervangt NEN 913:1963; NEN 913:1998 Ontw. Nederlandse norm. NEN 913 (nl) Melk en vloeibare melkproducten - Bepaling van de titreerbare zuurtegraad

Vervangt NEN 913:1963; NEN 913:1998 Ontw. Nederlandse norm. NEN 913 (nl) Melk en vloeibare melkproducten - Bepaling van de titreerbare zuurtegraad Vervangt NEN 913:1963; NEN 913:1998 Ontw. Nederlandse norm Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst

Nadere informatie

Voorbeeld. norm. Preview. NEN-ISO (en)

Voorbeeld. norm. Preview. NEN-ISO (en) Nederlandse norm Water - Bepaling van het gehalte aan nitraat - Deel 3: Spectrometrische methode met zwavelsalicylzuur (ISO 7890-3:1988.IDT) NEN-ISO 7890-3 (en) Water quality - Determination of nitrate

Nadere informatie

Vervangt NEN-EN :1997; NEN-EN :1999 Ontw. Nederlandse norm. NEN-EN (en)

Vervangt NEN-EN :1997; NEN-EN :1999 Ontw. Nederlandse norm. NEN-EN (en) Vervangt NEN-EN 1780-3:1997; NEN-EN 1780-3:1999 Ontw. Nederlandse norm Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende

Nadere informatie

Voorbeeld. Preview ISO 5291 INTERNATIONAL STANDARD

Voorbeeld. Preview ISO 5291 INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 5291 Third edition 2011-12-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst

Nadere informatie

Nederlandse norm. NEN-ISO 16039/A1 (en)

Nederlandse norm. NEN-ISO 16039/A1 (en) Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This

Nadere informatie

Samen met NEN-ISO 68-1:1999 vervangt deze norm NEN 81:1982. Nederlandse norm NEN-ISO 724

Samen met NEN-ISO 68-1:1999 vervangt deze norm NEN 81:1982. Nederlandse norm NEN-ISO 724 Samen met NEN-ISO 68-:999 vervangt deze norm NEN 8:982 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst

Nadere informatie

Voorbeeld. norm. Preview. NEN-IS0 2176(en) Petroleum products - Lubricating grease Determination of dropping point (ISO 2176:1995,IDT) Nederlandse

Voorbeeld. norm. Preview. NEN-IS0 2176(en) Petroleum products - Lubricating grease Determination of dropping point (ISO 2176:1995,IDT) Nederlandse Nederlandse norm Petroleum products - Lubricating grease Determination of dropping point (ISO 2176:1995,IDT) NEN-IS0 2176(en) april 1995 ICS 75.100 Vervangt NEN-ISO 2176:1979; NEN 1950:1971 Dit document

Nadere informatie

Agricultural tractor drive wheel tyres - Method of measuring tyre rolling circumference (ISO 11795:1997) februari 1998 ICS

Agricultural tractor drive wheel tyres - Method of measuring tyre rolling circumference (ISO 11795:1997) februari 1998 ICS Nederlandse norm NEN-ISO 11795 Banden voor aandrijfwielen van trekkers voor land- en bosbouw - Methode voor de meting van de rolomtrek van de band (ISO 11795:1997) Agricultural tractor drive wheel tyres

Nadere informatie

Nederlandse norm. NEN-EN (en)

Nederlandse norm. NEN-EN (en) Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This

Nadere informatie

Nederlandse voornorm NAD-NVN-ENV 1995-1-1. (nl)

Nederlandse voornorm NAD-NVN-ENV 1995-1-1. (nl) Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This

Nadere informatie

Voorbeeld. Onderdeel Sociaal Cultureel Werk/Welzijn ouderen. Preview. Certificatieschema Welzijn en Maatschappelijke Dienstverlening > Versie 2009

Voorbeeld. Onderdeel Sociaal Cultureel Werk/Welzijn ouderen. Preview. Certificatieschema Welzijn en Maatschappelijke Dienstverlening > Versie 2009 This document may only be used on a stand-alone PC. Use in a network is only permitted when a supplementary license agreement for us in a network with NEN has been concluded. Voorbeeld Certificatieschema

Nadere informatie

Voorbeeld. Preview ISO INTERNATIONAL STANDARD. Space systems Fluid characteristics Part 6: Monomethylhydrazine propellant

Voorbeeld. Preview ISO INTERNATIONAL STANDARD. Space systems Fluid characteristics Part 6: Monomethylhydrazine propellant INTERNATIONAL STANDARD ISO 14951-6 First edition 1999-10-01 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst

Nadere informatie

Voorbeeld. norm NEN-EN Preview. Ontwerp

Voorbeeld. norm NEN-EN Preview. Ontwerp Nederlandse Ontwerp norm NEN-EN 50471 Electromagnetic compatibility (EMC) - Product family emission standard for wireline telecommunication networks Publicatie uitsluitend voor commentaar Commentaar voor

Nadere informatie

Voorbeeld. Preview NEDERLANDSE NORM UDC

Voorbeeld. Preview NEDERLANDSE NORM UDC UDC 744.347 Technische tekenmaterialen - Sjablonen voor beschrifting en symbolen - Deel 2: Sleufbreedten voor potloden en stifthouders Technical drawing materials - Templates for lettering and symbols

Nadere informatie

Vervangt CR :1996; NEN-EN :2003 Ontw. Nederlandse norm. NEN-EN (en)

Vervangt CR :1996; NEN-EN :2003 Ontw. Nederlandse norm. NEN-EN (en) Vervangt CR 205-011:1996; NEN-EN 50090-7-1:2003 Ontw. Nederlandse norm Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende

Nadere informatie

Cliënt - / Patiëntveiligheid

Cliënt - / Patiëntveiligheid Cliënt - / Patiëntveiligheid eld be iew ev Pr or Vo Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst

Nadere informatie

Voorbeeld. Preview ISO INTERNATIONAL STANDARD

Voorbeeld. Preview ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 13492 Second edition 2007-12-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst

Nadere informatie