INTERNATIONAL STANDARD. Hot-rolled steel sections - Part 2 : Unequal-leg angles - Dimensions
|
|
- Lucas Baert
- 5 jaren geleden
- Aantal bezoeken:
Transcriptie
1 INTERNATIONAL STANDARD IS First edition Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This document may only be used on a stand-alone PC. Use in a network is only permitted when a supplementary license agreement for us in a network with NEN has been concluded. Hot-rolled steel sections - Part 2 : Unequal-leg angles - Dimensions Profil& en acier lamin& ;i chaud - Partie 2: Corn&es ii aides in&gales - Dimensions Reference number IS : 1989 (El
2 IS : 1989 (E) Foreword IS0 (the International Organization for Standardization) is a worldwide federation of national standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the IS0 Council. They are approved in accordance with IS0 procedures requiring at least 75 % approval by the member bodies voting. International Standard IS was prepared by Technical Committee ISO/TC 17, S tee/. It cancels and replaces IS0 Recommendation R : 1968, of which it constitutes a technical revision. IS0 657 consists of the following parts, under the general title Hot-rolled steel sections : - Part 7: Equal-leg angles - Dimensions - Part 2: Unequal-leg angles - Dimensions - Part 5: inch series Equal-leg angles and unequal-leg angles - Tolerances for metric and - Part 6: Parallel flange sections (metric series) - Dimensions - Part 70: Parallel flange sections - Tolerances - Part sectional 77 : Sloping properties flange channel set tions (metric series) - Dimensions and Part 73: Tolerances on sloping flange beam, column and channel sections - Part 75: Sloping tional properties - Part 76: Sloping tional properties flange beam sections (metric series) - Dimensions and sec- flange column sections (metric series) - Dimensions and sec- - Part78:L sections for properties and tolerances shipbuilding (metric series) - Dimensions, sectional - Part 79: tolerances Bulb flats (metric series) - Dimensions, sectional properties and - Part : Parallel flange channel sections - Dimensions - Part 27: T-sections with equal depth and flange width - Dimensions 0 IS All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher./droits de reproduction reserves. Aucune partie de cette publication ne peut etre reproduite ni utilisee sous quelque forme que ce soit et par aucun procede, electronique ou mecanique, y compris la photocopie et les microfilms, sans I accord ecrit de I editeur. International Organization for Standardization Case postale 56 l CH-1211 Geneve l Switzerland Printed in Switzerland/lmprime en Suisse
3 INTERNATIONAL STANDARD IS : 1989 (E) Hot-rolled steel sections - Part 2: Unequal-leg angles - Dimensions 1 Scope 3 Dimensions This part of IS0 657 specifies dimensions of hot-rolled unequalleg angles. 3.1 The dimensions of unequal-leg angles are given in table 1. Preferred dimensions are given in bold type. 3.2 The root radii given in table 1 are for information only. 2 Normative reference The following standard contains provisions which, through reference in this text, constitute provisions of this part of IS At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this part of IS0 657 are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below. Members of IEC and IS0 maintain registers of currently valid International Standards. IS : 1976, Hot-rolled steel sections - Part 5 : Equal-leg angles and unequal-leg angles - Tolerances for metric and inch series. 3.3 The toe radius has not been specified and may, if considered necessary, be determined independently for national standards. 4 Sectional properties The mass, sectional area and sectional properties of unequalleg angles are given for information in table 1. They have been calculated assuming a toe radius equal to half the root radius. 5 Dimensional tolerances Tolerances on the dimensions specified in table 1 are covered in IS
4 lnclination of v-v axis tan a (22) 0,427 0,421 0,252 0,380 0,429 0,356 0,352 0,621 0,257 0,253 r toe t ii- froot toe Table 1 - Dimensions and sectional properties of hot-rolled unequal-leg angles T r Distances Sectional of centre L Mass Dimensions area of gravity. Designation A B rroot CX 5 CU x~3 x~4 x~4 x25~4 45XX5 XX4 XX5 XX5 60XX5 60x~6 kg/m cm* (I) (2) (3) (4) (5) (6) (7) I,12 I,46 I,77 I,93 2,76 2,41 2,96 3,36 3,36 3,98 I,43 I,86 2,26 2,46 3,52 3,07 3,78 4,28 4,28 5,07 mm mm mm mm x-x t Cv I, TX 4c Iv cm cm cm (8) (9) (IO) 0,990 0,2 2,05 1,03 0,541 2,02 I, I,36 0,623 2,69 I,52 0,779 3,04 I,68 0,701 3,36 I,73 0,741 3,33 I,55 I,06 3,49 2,17 0,684 3B3 2,21 0,723 3,85 cm cm4 (11) (12) I,04 I,25 I,04 I,59 I,17 3,59 I,35 3,89 I,58 6,98 I,67 7,7l I,65 9,36 I,85 IO,3 I,77 15,6 1,76 18,2 cm (13) 0,935 0,925 I,26 I,26 I,41 I, I,55 I,91 I,90 Sectional properties about axes cm3 cm4 (14) (15) 0,621 0,437 0,807 0,553 I,42 0,600 I,47 I,16 2,35 2,47 2,33 2,09 2,86 2,51 3,00 5,85 4,07 2,63 4,81 3,05 Y-Y 5 cm (16) 0,553 0,546 0,514 0,687 0,837 0,825 0,816 I,17 0,784 0,776 r u-u v-v % I, Cl I, hi cm3 cm4 cm cm4 cm (17) (18) (19) () (21) 0,292 I,43 1,oo 0,256 0,424 0,379 I,81 0,988 0,3 0,421 0,393 3,80 I, 0,393 0,417 0,619 4,35 I,33 0,700 0,534 I,11 8,00 I,51 I,45 0,641 0, ,67 I,27 0,644 I,11 IO,3 I, ,639 I,99 13,2 I,75 3,03 0,842 I,14 16,5 I,97 I,71 0,633 I,34 19,3 I,95 2,Ol 0,6
5 Bestelformulier Stuur naar: NEN Standards Products & Services t.a.v. afdeling Klantenservice Antwoordnummer WB Delft NEN Standards Products & Services Postbus GB Delft Vlinderweg AX Delft Ja, ik bestel ex. ISO 657-2:1989 en Hot-rolled steel sections - Part 2: Unequal-leg angles - Dimensions T (015) F (015) Wilt u deze norm in PDF-formaat? Deze bestelt u eenvoudig via Gratis nieuwsbrieven Wilt u op de hoogte blijven van de laatste ontwikkelingen op het gebied van normen, normalisatie en regelgeving? Neem dan een gratis abonnement op een van onze nieuwsbrieven. Gegevens Bedrijf / Instelling T.a.v. O M O V Klantnummer NEN Uw ordernummer BTW nummer Postbus / Adres Postcode Plaats Telefoon Fax Factuuradres (indien dit afwijkt van bovenstaand adres) Postbus / Adres Postcode Plaats Datum Handtekening Retourneren Fax: klantenservice@nen.nl Post: NEN Standards Products & Services, t.a.v. afdeling Klantenservice Antwoordnummer 10214, 2600 WB Delft (geen postzegel nodig). Voorwaarden De prijzen zijn geldig tot 31 december 18, tenzij anders aangegeven. Alle prijzen zijn excl. btw, verzend- en handelingskosten en onder voorbehoud bij o.m. ISO- en IEC-normen. Bestelt u via de normshop een pdf, dan betaalt u geen handeling en verzendkosten. Meer informatie: telefoon , dagelijks van 8. tot uur. Wijzigingen en typefouten in teksten en prijsinformatie voorbehouden. U kunt onze algemene voorwaarden terugvinden op: LEREN, WERKEN EN GROEIEN MET NEN preview - 18
Voorbeeld. Preview. Dit document is een voorbeeld van NEN / This document is a preview by NEN
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
Nadere informatieVoorbeeld. Preview ISO 5208 INTERNATIONAL STANDARD. Industrial valves - Pressure testing of valves
INTERNATIONAL STANDARD ISO 5208 Second edition 1993-01-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoorbeeld. Preview ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10202-8 First edition 1998-07-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoorbeeld. norm NEN-ISO Preview. Olie van Eucalyptus citriodora Hook (ISO 3044:1997) Nederlandse. Nederlands Normalisatie-instituut
Nederlandse norm NEN-ISO 3044 Olie van Eucalyptus citriodora Hook (ISO 3044:1997) Oil of Eucalyptus citriodora Hook (ISO 3044:1997) 2e druk, oktober 1997 ICS 71.100.60 Vervangt NEN-ISO 3044:1977 Als Nederlandse
Nadere informatieINTERNATIONAL STANDARD. Machine bridge reamers. Alésoirs de chaudronnerie, à machine
INTERNATIONAL STANDARD ISO 2238 Second edition 2011-08-15 Machine bridge reamers Alésoirs de chaudronnerie, à machine Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een
Nadere informatieVoorbeeld. norm NEN-ISO Preview
Nederlandse norm NEN-ISO 9224 Corrosie van metalen en legeringen Corrosiviteit van de atmosfeer - Richtwaarden voor de corrosiviteitscategorieèn (ISO 9224:1992) Corrosion of metals and alloys - Corrosivity
Nadere informatieVoorbeeld. Preview IS INTERNATIONAL STANDARD. Space data and information transfer systems - ASCII encoded English
INTERNATIONAL STANDARD IS0 14962 First edition 1997-12-15 Space data and information transfer systems - ASCII encoded English Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik
Nadere informatieINTERNATIONAL STANDARD. Rolling bearings - Radial bearings with locating snap ring - Dimensions and tolerantes
INTERNATIONAL STANDARD ISO 464 Second edition 1995-05-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoorbeeld. Preview ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 2859-1 First edition 1999-11-15 AMENDMENT 1 2011-06-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een
Nadere informatieVoorbeeld NEN-ISO Preview. Hydrauliek en pneumatiek. Boringen en zuigerstangmiddellijnen van cilinders. Metrische reeks (ISO 3320:1987)
Nederlandse NEN-ISO 3320 Hydrauliek en pneumatiek. Boringen en zuigerstangmiddellijnen van cilinders. Metrische reeks (ISO 3320:1987) Fluid power systems and components. Cylinder bores and piston rod diameters.
Nadere informatieInternational Standard
International Standard 583711 INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWlEIK)(aYHAPO,WAR OPTAHM3ALlMR fl0 CTAHJ1APTbl3ALWl@ORGANISATION INTERNATIONALE DE NORMALISATtON Dit document mag slechts op
Nadere informatieVoorbeeld. Preview INTERNATIONAL STANDARD ISO Glass containers Standard tolerances for bottles
INTERNATIONAL STANDARD ISO 9058 Second edition 2008-03-01 Glass containers Standard tolerances for bottles Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is
Nadere informatieVoorbeeld. Preview ISO 614 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 614 Fourth edition 2012-06-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoorbeeld. Preview. Implants for surgery Metallic skeletal pins and wires. Part 1: General requirements
INTERNATIONAL STANDARD ISO 5838-1 Third edition 2013-03-01 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieINTERNATIONAL STANDARD. Aéronautique et espace Filetage MJ Partie 2: Dimensions limites pour vis et écrous
INTERNATIONAL STANDARD ISO 5855-2 Third edition 1999-10-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoorbeeld. Preview. Steel and steel products Inspection documents. Aciers et produits sidérurgiques Documents de contrôle. Second edition
INTERNATIONAL STANDARD ISO 10474 Second edition 2013-07-01 Steel and steel products Inspection documents Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen.
Nadere informatieVoor de plaatsing van patrijspoorten in schepen is de internationale norm ISO 5780, Ie druk, 1987, als Nederlandse norm aanvaard.
UDC 629.12.011.83 Scheepsbouw - Patrijspoorten - Plaatsing NEN-ISO 5780 Shipbuilding - Side scuttles - Positioning le druk, september 1987 Voor de plaatsing van patrijspoorten in schepen is de internationale
Nadere informatieVoorbeeld. Preview ISO 9982 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 9982 Second edition 1998-06-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieINTERNATIONAL ORGANIZATION FOR STANDARDlZATlON.ME~YHAPO~HAR OPl-AHM3AlJMR IlO INTERNATIONALE DE NORMALISATION
International Standard INTERNATIONAL ORGANIZATION FOR STANDARDlZATlON.ME~YHAPO~HAR OPl-AHM3AlJMR IlO CTAHAAPTM3ALWlM@ORGANlSATlON INTERNATIONALE DE NORMALISATION Dit document mag slechts op een stand-alone
Nadere informatieVoorbeeld. Preview NEN-ISO Hydrauliek en pneumatiek. Driepolige contactstoppen met aardcontact. Karakteristieken en (ISO 4400:1994) Nederlandse
Nederlandse Hydrauliek en pneumatiek. Driepolige contactstoppen met aardcontact. Karakteristieken en eisen (ISO 4400:1994) NEN-ISO 4400 Fluid power systemsand components. Three-pin electrical plug connectors
Nadere informatieINTERNATIONAL STANDARD NORME INTERNATIONALE. Urine absorbing aids - Vocabulary - Part I: Conditions of urinary incontinence
INTERNATIONAL STANDARD NORME INTERNATIONALE 9949-l First edition Premikre edition 1993-07-O 1 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan
Nadere informatieINTERNATIONAL ORGANIZATION FOR STANDARDIZATION.ME)I(C1YHAPOfiHAR OPrAHMJALWlR l-l0 CTAH~APTbl3AlWWORGANISATION INTERNATIONALE DE NORMALlSATlON
International Standard INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.ME)I(C1YHAPOfiHAR OPrAHMJALWlR l-l0 CTAH~APTbl3AlWWORGANISATION INTERNATIONALE DE NORMALlSATlON Dit document mag slechts op een stand-alone
Nadere informatieINTERNATIONAL STANDARD. Produits abrasifs agglomérés Dimensions Partie 8: Meules pour ébarbage et ébavurage
INTERNATIONAL STANDARD ISO 603-8 First edition 1999-07-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoorbeeld. norm NEN-ISO Preview. Olie van Eucalyptus citriodora Hook (ISO 3044:1997) Nederlandse. Nederlands Normalisatie-instituut
Nederlandse norm NEN-ISO 3044 Olie van Eucalyptus citriodora Hook (ISO 3044:1997) Oil of Eucalyptus citriodora Hook (ISO 3044:1997) 2e druk, oktober 1997 ICS 71.100.60 Vervangt NEN-ISO 3044:1977 Als Nederlandse
Nadere informatieScheepsbouw - Scheepsschroeven - Fabricagetoleranties - Deel 2: Schroeven met een middel lijn vanaf 0,8 m tot en met 2,5 m
UDC 629.12.037.1:621.753.1 Scheepsbouw - Scheepsschroeven - Fabricagetoleranties - Deel 2: Schroeven met een middel lijn vanaf 0,8 m tot en met 2,5 m Shipbuilding - Ship screw propellers - Manufacturing
Nadere informatieVoorbeeld. Preview NEN-EN Dit document is een voorbeeld van NEN / This document is a preview by NEN
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
Nadere informatieINTERNATIONAL STANDARD Thread run-outs for fasteners with thread in accordance with IS0 261 and IS0 262
~~ NTERNATONAL STANDARD 3508 NTERNATONAL ORGANZATON FOR STANDARDZATON l EWiYHAPOllHAR OP-AHM3AUW no CTAH~APTH3AUMH.ORGANSATON NTERNATONALE DE NORMALSATON. Dit document mag slechts op een stand-alone PC
Nadere informatieIndustrial trucks operating in special conditions of stacking with mast tilted forward - Additional stability test september 1998 ICS 53.
Nederlandse norm NEN-ISO 5767 Transportwagens voor de industrie bedoeld om te stapelen met vooroverhellende geleider - Stabiliteitsproeven Industrial trucks operating in special conditions of stacking
Nadere informatieVoorbeeld. Preview ISO 603-16 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 603-16 First edition 1999-07-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieINTERNATIONAL STANDARD Dessins techniques - Principes g&graux de reprbentation - Partie 2 7: Prbparation des traits par sys tkmes de CA0
NTERNATONAL STANDARD 128-21 First edition 1997-03-01 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoorbeeld. norm NEN-ISO Preview. Pneumatiek - Identificatie van poorten en besturingsmechanismen van stuurventielen (ISO 11727:1999)
Nederlandse norm NEN-ISO 11727 Pneumatiek - Identificatie van poorten en besturingsmechanismen van stuurventielen en andere onderdelen (ISO 11727:1999) Pneumatic fluid power - Identification of ports and
Nadere informatieINTERNATIONAL STANDARD Plain bearings - Copper alloy bushes. Paliers lisses -
NTERNATONAL STANDARD 4379 Second edition 1993-04-15 Corrected and reprinted 1995-07-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als
Nadere informatieVoorbeeld. Preview NEN-ISO Dit document is een voorbeeld van NEN / This document is a preview by NEN. Nederlandse
Nederlandse NEN-ISO 11926-1 Leidingverbindingen voor hydraulische en pneumatische systemen en algemene toepassingen. Poorten en inschroefnippels voorzien van schroefdraad volgens ISO 725 voor gebruik met
Nadere informatieVoorbeeld. Preview. Dit document is een voorbeeld van NEN / This document is a preview by NEN
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
Nadere informatieVoorbeeld NEN-ISO Preview
Nederlandse NEN-ISO 4183 Riemaandrijvingen. Klassieke en smalle V-riemen. Gegroefde riemschijven (systeem gebaseerd op de gegeven breedte) (ISO 4183:1995) Belt drives. Classical and narrow V-belts. Grooved
Nadere informatieVoorbeeld. norm. Preview. NEN-ISO (en)
Nederlandse norm Water - Bepaling van het gehalte aan nitraat - Deel 3: Spectrometrische methode met zwavelsalicylzuur (ISO 7890-3:1988.IDT) NEN-ISO 7890-3 (en) Water quality - Determination of nitrate
Nadere informatieVoorbeeld NËN : ISÖ3903. Preview. Nederlandse. Scheepsbouw en maritieme constructies. Gewone rechthoekige scheepsramen (ISO 3903:1993)
Nederlandse NËN : ISÖ3903 Scheepsbouw en maritieme constructies. Gewone rechthoekige scheepsramen (ISO 3903:1993) Shipbuilding and marine structures. Ships' ordinary rectangular windows 2e druk, april
Nadere informatieVoorbeeld. Preview. NEN-ISO (en) Nederlandse. Dit document is een voorbeeld van NEN / This document is a preview by NEN
Nederlandse norm Technische productdocumentatie - Organisatie en benaming van lagen bij CAD - Deel 2: Concepten, opmaak en codes gebruikt in gebouwdocumentatie (ISO 13567-2:1998,IDT) NEN-ISO 13567-2 (en)
Nadere informatieVoorbeeld. Preview. N Nederlands. norm NEN-ISO 724. ISO-metrische schroefdraad voor algemene toepassing - Nominale maten (ISO 724:1993,IDT)
Nederlandse norm NEN-ISO 7 ISO-metrische schroefdraad voor algemene toepassing - Nominale maten (ISO 7:1993,IDT) ISO general-purpose metric screw threads - Basic dimensions (IS0 7:1993,IDT) maart 1999
Nadere informatieVoorbeeld. Preview. N Nederlands. norm NEN-ISO 724. ISO-metrische schroefdraad voor algemene toepassing - Nominale maten (ISO 724:1993,IDT)
Nederlandse norm NEN-ISO 72 ISO-metrische schroefdraad voor algemene toepassing - Nominale maten (ISO 72:1993,IDT) ISO general-purpose metric screw threads - Basic dimensions (IS0 72:1993,IDT) maart 1999
Nadere informatieVoorbeeld. Preview ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 603-15 First edition 1999-07-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoorbeeld. norm NEN-ISO Preview
Nederlandse norm NEN-ISO 3070-2 Beproeving van kotter- en freesmachines met een horizontale spil Beproeving van de nauwkeurigheid - Deel 2: Tafeluitvoering (ISO 3070-2:1997) Test conditions for boring
Nadere informatieNederlands Normalisatie-instituut Polakweg 5, Postbus 5810, 2280 HV Rijswijk (ZH), telefoon (070) *, telex 32123, postrekening 25301
UDC 677.O76.73:001.1+ Visnetten - Bevestigen en verbinden van netwerk Benamingen en afbeeldinoen Fishinij ne Is - Mounting.n'j jcininy of netting - Terms and illustrations ra-ia) 3660 1e druk, juni 1978
Nadere informatieVoorbeeld. Preview ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 6474-2 First edition 2012-04-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoorbeeld. norm. Preview NEN-ISO 15267
Nederlandse norm Plantaardige en dierlijke oliën en vetten - Bepaling van het vlampunt met de methode met een gesloten kroes volgens Pensky-Martens (ISO 15267:1998) NEN-ISO 15267 Animal and vegetable fats
Nadere informatieVoorbeeld INTERNATIONAL STANDARD Preview. Tangential keys and keyways. First edition UDC Ref. No.
INTERNATIONAL STANDARD 3117 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXAYHAPOAHAR OPl-AHM3ALWV.I l-io ctahaaptm3alwi.organisatlon INTERNATIONALE DE NORMALISATION Dit document mag slechts op een
Nadere informatieLow voltage electrical installations - Part 6: Verification. Central Secretariat: rue de Stassart 35, B Brussels
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
Nadere informatieVoorbeeld. Preview HD S2
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
Nadere informatieVervangt NEN-EN :2000 Ontw. Nederlandse norm. NEN-EN (en)
Vervangt NEN-EN 13920-10:2000 Ontw. Nederlandse norm Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieJustitiële Jeugdinrichtingen
Justitiële Jeugdinrichtingen eld be iew ev Pr or Vo Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoorbeeld. Preview ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10958-1 First edition 1998-06-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieIn relatie tot het Kwaliteitskader voorkomen seksueel misbruik in de Jeugzorg
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
Nadere informatieNederlandse norm. NEN-ISO /A1 (en)
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
Nadere informatieVoorbeeld. Preview INTERNATIONAL STANDARD. Cranes - Classification - Part 5: Overhead travelling and Portal bridge cranes
INTERNATIONAL STANDARD First edi tion 1991-09-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoorbeeld. Jeugdzorg. Preview. Addendum bij het HKZ-certificatieschema >
Voorbeeld Addendum bij het HKZ-certificatieschema > Jeugdzorg In relatie tot het Kwaliteitskader voorkomen seksueel misbruik in de jeugdzorg Dit document mag slechts op een stand-alone PC worden geinstalleerd.
Nadere informatieNederlandse norm. NEN-ISO 16602/A1 (en)
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
Nadere informatieVoorbeeld. Preview. NEN-IEC /A2 (en; fr) Wijzigingsblad. Nederlandse
Nederlandse norm Meeraderige en symmetrische paar- /vierling-kabels voor digitale communicatie - Deel 3-1: Bekabeling op de werkplek - Raamspecificatie (IEC 61156-3-1:1995/A2:2001,IDT) Wijzigingsblad NEN-IEC
Nadere informatieVoorbeeld. Preview INTERNATIONAL STANDARD ISO 255. Belt drives - Pulleys for V-belts (System based on datum width) - Geometrical inspection of grooves
INTERNATIONAL STANDARD ISO 255 Second edi tion 1990-11-01 - Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieBoormaten voor kerngaten van schroefdraad
UDC.88.07:.9:.99 nederlandse praktijkrichtlijn e druk, november 98 Boormaten voor kerngaten van schroefdraad Richtwaarden Tapping drill sizes Onderwerp Vervangt NEN 89 Dit document mag slechts op een stand-alone
Nadere informatieVoorbeeld. norm Identification cards - Integrated circuit(s) cards with contacts - Part 1: Physical characteristics (ISO/IEC :1998,IDT) Preview
Nederlandse norm Identification cards - Integrated circuit(s) cards with contacts - Part 1: Physical characteristics (ISO/IEC 7816-1:1998,IDT) NEN-ISO/IEC 7816-1 (en) Vervangt NEN-ISO 7816-1:1989 oktober
Nadere informatieVervangt NEN 913:1963; NEN 913:1998 Ontw. Nederlandse norm. NEN 913 (nl) Melk en vloeibare melkproducten - Bepaling van de titreerbare zuurtegraad
Vervangt NEN 913:1963; NEN 913:1998 Ontw. Nederlandse norm Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVervangt NEN-EN :1997; NEN-EN :1999 Ontw. Nederlandse norm. NEN-EN (en)
Vervangt NEN-EN 1780-3:1997; NEN-EN 1780-3:1999 Ontw. Nederlandse norm Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende
Nadere informatieVoorbeeld. Preview ISO INTERNATIONAL STANDARD. Space systems Fluid characteristics Part 6: Monomethylhydrazine propellant
INTERNATIONAL STANDARD ISO 14951-6 First edition 1999-10-01 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVervangt CR :1996; NEN-EN :2003 Ontw. Nederlandse norm. NEN-EN (en)
Vervangt CR 205-011:1996; NEN-EN 50090-7-1:2003 Ontw. Nederlandse norm Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende
Nadere informatieNederlands Normalisatie-instituut Kalfjeslaan 2, Postbus 5059, 2600 GB Delft, telefoon (015) Г, telex 38144, postrekening 25301
UDC 667.62242:620.168.32 Pigmenten en vulstoffen - Algemene beproevingsmethoden - Deel 7: Bepaling van de zeefrest - Handmethode met water General methods of test for pigments and extenders Part 7: Determination
Nadere informatieSamen met NEN-ISO 68-1:1999 vervangt deze norm NEN 81:1982. Nederlandse norm NEN-ISO 724
Samen met NEN-ISO 68-:999 vervangt deze norm NEN 8:982 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieVoorbeeld. Preview NEDERLANDSE NORM UDC
UDC 744.347 Technische tekenmaterialen - Sjablonen voor beschrifting en symbolen - Deel 2: Sleufbreedten voor potloden en stifthouders Technical drawing materials - Templates for lettering and symbols
Nadere informatieNederlandse norm. NEN-ISO 3065 (en)
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
Nadere informatieVoorbeeld. norm NEN-EN-ISO Preview. N Nederlands
Nederlandse norm NEN-EN-ISO 7854 Met rubber of kunststof bedekte weefsels - Bepaling van de weerstand tegen beschadiging door buigen (ISO 7854:1995) Rubber- or plastics-coated fabrics - Determination of
Nadere informatieNederlandse norm. NEN-ISO 16039/A1 (en)
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
Nadere informatieNederlandse voornorm NAD-NVN-ENV 1995-1-1. (nl)
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
Nadere informatieVoorbeeld. Onderdeel Sociaal Cultureel Werk/Welzijn ouderen. Preview. Certificatieschema Welzijn en Maatschappelijke Dienstverlening > Versie 2009
This document may only be used on a stand-alone PC. Use in a network is only permitted when a supplementary license agreement for us in a network with NEN has been concluded. Voorbeeld Certificatieschema
Nadere informatieVoorbeeld. norm NEN-EN Preview. Ontwerp
Nederlandse Ontwerp norm NEN-EN 50471 Electromagnetic compatibility (EMC) - Product family emission standard for wireline telecommunication networks Publicatie uitsluitend voor commentaar Commentaar voor
Nadere informatieVoorbeeld. Preview. Hydrauliek en pneumatiek. Cilindermantels. Deel 1 : Eisen voor stalen buizen met speciaal afgewerkte boringen (ISO :1980)
Nederlandse NEN-ISO 4394-1 Hydrauliek en pneumatiek. Cilindermantels. Deel 1 : Eisen voor stalen buizen met speciaal afgewerkte boringen (ISO 4394-1:1980) Fluid power systems and components. Cylinders
Nadere informatieVoorbeeld. Preview NEN-EN-ISO Verzonken schroeven met platte kop met zaaggleuf (met eenheidskop). Produktklasse A (ISO 2009:1994) Nederlandse
Nederlandse Verzonken schroeven met platte kop met zaaggleuf (met eenheidskop). Produktklasse A (ISO 2009:1994) NEN-EN-ISO 2009 EN ISO 2009 Slotted countersunk flat head screws (common head style). Product
Nadere informatieVeiligheidsmodule. HKZ-certificatieschema Instellingen voor geestelijke gezondheidszorg > Versie 2011
eld be iew ev Pr or Vo Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN
Nadere informatieVoorbeeld. Preview. NEN-EN-ISO (en) Dit document is een voorbeeld van NEN / This document is a preview by NEN. Nederlandse
Nederlandse norm Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environments (ISO 12944-2:1998,IDT) NEN-EN-ISO 12944-2 (en) augustus
Nadere informatieCliënt - / Patiëntveiligheid
Cliënt - / Patiëntveiligheid eld be iew ev Pr or Vo Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
Nadere informatieBrown coals and lignites - Determination of humic acids (ISO5073:1999,IDT) januari 2000 ICS
Nederlandse norm NEN-ISO 5073 (en) Bruinkool en ligniet - Bepaling van humuszuren (ISO 5073:1999,IDT) Brown coals and lignites - Determination of humic acids (ISO5073:1999,IDT) januari 2000 ICS 73.040
Nadere informatie