HÉT ATERATIEF VOOR COVETIOEE FUORESCETIEBUIZE THE ATERATIVE TO COVETIOA FUORESCET TUBES ED T BUIZE SERIE ED T TUBES SERIES Uw bedrijf klaarmaken voor de toekomst? Vervang conventionele fluorescentiebuizen door Prolumia ED T-buizen en bespaar tot wel 70%. Uw oude buizen zijn zo omgebouwd naar energiezuinige ED T-verlichting! Bovendien gaan ED T-buizen tot vijf maal langer mee dan een fluorescentie oplossing. Dit scheelt aanzienlijk in onderhoudskosten. Is your company ready for the future? Replace conventional fluorescence tubes for Prolumia ED T-tubes and save up to 70%. Your old tubes are easily converted to energy-efficient ED fluorescent lighting! Furthermore ED T-tubes have a lifespan of up to five times longer than a fluorescence solution. This gives you significantly less maintenance costs. SPECIFIEKE KEMERKE De afscherming wordt geleverd in transparante en opalen uitvoering ED technologie zorgt voor laag energieverbruik en lange levensduur ED starter zorgt voor minimale aanpassing van bedrading in het armatuur SPECIFIC FEATURES The cover can be supplied in a transparent or milky version ED technology guarantees low power consumption and a long lifetime Fixture rewiring is limited by a special ED starter 252 PROUMIA
ED T-BUIZE SERIE (ED T TUBES SERIES) ED T-Buizen 600 mm ED T Tubes 600 mm 11W 408710xx 255 ED T-Buizen 1200 mm ED T Tubes 1200 mm 20W 408710xx 256 ED T-Buizen 1500 mm ED T Tubes 1500 mm 24W 408710xx 257 www.prolumia.nl 253
ED T-BUIZE SERIE (ED T TUBES SERIES) TOEPASSIGSGEBIEDE: KOE- E VRIESCEE, PARKEERGARAGES, MAGAZIJE, IDUSTRIE- E KATOOROMGEVIGE ETC. APPICATIOS: COD STORAGE AREA S, IDOOR CAR PARKS, WAREHOUSES, IDUSTRIA AD OFFICE EVIROMETS, ETC. 254 PROUMIA
ED T-BUIZE SERIE (ED T TUBES SERIES) ED T-Buis 600 mm ED T Tube 600 mm 11W ED T buis voor toepassing i.p.v. conventionele fluorescentiebuizen Behuizing gemaakt uit geëxtrudeerd aluminium en voorzien van een polycarbonaat afscherming De afscherming wordt geleverd in transparante en opalen uitvoering ED technologie zorgt voor laag energieverbruik en lange levensduur Besparingen kunnen oplopen tot 70% ten opzichte van fluorescentie oplossingen en een verwachte levensduur die tot vijf maal langer is De uitstraalrichting van de buis is aan te passen door middel van de verstelbare eindkappen (0-180 ) Voeding van de ED T vindt plaats aan één zijde ED starter zorgt voor minimale aanpassing van bedrading in het armatuur Toepassingsgebieden: koel- en vriescellen, parkeergarages, magazijnen, industrie- en kantooromgevingen etc. ED fluorescent tube replacement for conventional fluorescent tubes 0.21 Housing made of extruded aluminum with a polycarbonate cover 408710/.. /.. 6: Transparant 7: Opaal The cover can be supplied in a transparent or milky version ED technology guarantees low power consumption and a long lifetime Energy savings up to 70% and lifetimes up to five times longer compared to fluorescent solutions Beam direction of tube can be adjusted (0-180 ) with adjustable end caps The ED fluorescent tube is powered on one side Fixture rewiring is limited by a special ED starter 1: 3000K, Warm wit Warm white 7: 4000K, Puur wit Pure white 4: 6500K, Koud wit Cool white Applications: cold storage area s, indoor car parks, warehouses, industrial and office environments, etc. ichtbron (ight Source): SMD 3528 ED: 11W Verlichtingshoek (Beam angle): transparant (transparent): 120, opaal (milky): 150 ichtstroom (ight output) ±10%: 1: 3000K 1150lm 1090lm 7: 4000K 1320lm 1250lm 4: 6500K 1200lm 1140lm 26 588 Kleurweergave index (Color rendering index): Ra 80 Bedrijfstemperatuur (Operating temperature): -20 C - +40 C Aantal branduren (Rated life hours): 50.000 ED voeding (ingebouwd) (ED driver (included)) Voedingsspanning (Input): 110-240 Vac 50/60Hz Cosinus phi (Power factor): 0.91 Aansluitschema Wiring diagram Conventioneel/magnetisch voorschakelapparaat Conventional/magnetic ballast electromagnetische ballast en condensator(en). Rewire according below wiring scheme and bypass existing electromagnetic ballast and capacitor(s). hoogfrequente ballast. Rewire according below wiring scheme and bypass existing high frequency ballast. Vervang de bestaande starter door een ED starter. Replace existing starter with a ED starter. Magnetisch voorschakelapparaat* Magnetic ballast * Ondanks dat de ED buis werkt zonder verdere aanpassingen aan het armatuur, adviseren wij u het VSA en eventuele condensatoren uit het elektrische circuit te verwijderen. Dit om onnodig energieverbruik te voorkomen. * Although the ED tube works without further adjustments to the fitting, we recommend to remove the EB and capacitors (if any) in the electrical circuit, to prevent unnecessary energy consumption. www.prolumia.nl 255
ED T-BUIZE SERIE (ED T TUBES SERIES) ED T-Buis 1200 mm ED T Tube 1200 mm 20W ED T buis voor toepassing i.p.v. conventionele fluorescentiebuizen Behuizing gemaakt uit geëxtrudeerd aluminium en voorzien van een polycarbonaat afscherming De afscherming wordt geleverd in transparante en opalen uitvoering ED technologie zorgt voor laag energieverbruik en lange levensduur Besparingen kunnen oplopen tot 70% ten opzichte van fluorescentie oplossingen en een verwachte levensduur die tot vijf maal langer is De uitstraalrichting van de buis is aan te passen door middel van de verstelbare eindkappen (0-180 ) Voeding van de ED T vindt plaats aan één zijde ED starter zorgt voor minimale aanpassing van bedrading in het armatuur Toepassingsgebieden: koel- en vriescellen, parkeergarages, magazijnen, industrie- en kantooromgevingen etc. ED fluorescent tube replacement for conventional fluorescent tubes 0.37 Housing made of extruded aluminum with a polycarbonate cover 408710/.. /.. 6: Transparant 7: Opaal The cover can be supplied in a transparent or milky version ED technology guarantees low power consumption and a long lifetime Energy savings up to 70% and lifetimes up to five times longer compared to fluorescent solutions Beam direction of tube can be adjusted (0-180 ) with adjustable end caps The ED fluorescent tube is powered on one side Fixture rewiring is limited by a special ED starter 2: 3000K, Warm wit Warm white 8: 4000K, Puur wit Pure white 5: 6500K, Koud wit Cool white Applications: cold storage area s, indoor car parks, warehouses, industrial and office environments, etc. ichtbron (ight Source): SMD 3528 ED: 20W Verlichtingshoek (Beam angle): transparant (transparent): 120, opaal (milky): 150 ichtstroom (ight output) ±10%: 2: 3000K 2170lm 2060lm 8: 4000K 2400lm 2280lm 5: 6500K 2290lm 2170lm 25 1198 Kleurweergave index (Color rendering index): Ra 80 Bedrijfstemperatuur (Operating temperature): -20 C - +40 C Aantal branduren (Rated life hours): 50.000 ED voeding (ingebouwd) (ED driver (included)) Voedingsspanning (Input): 110-240 Vac 50/60Hz Cosinus phi (Power factor): 0.95 Aansluitschema Wiring diagram Conventioneel/magnetisch voorschakelapparaat Conventional/magnetic ballast electromagnetische ballast en condensator(en). Rewire according below wiring scheme and bypass existing electromagnetic ballast and capacitor(s). hoogfrequente ballast. Rewire according below wiring scheme and bypass existing high frequency ballast. Vervang de bestaande starter door een ED starter. Replace existing starter with a ED starter. Magnetisch voorschakelapparaat* Magnetic ballast * Ondanks dat de ED buis werkt zonder verdere aanpassingen aan het armatuur, adviseren wij u het VSA en eventuele condensatoren uit het elektrische circuit te verwijderen. Dit om onnodig energieverbruik te voorkomen. * Although the ED tube works without further adjustments to the fitting, we recommend to remove the EB and capacitors (if any) in the electrical circuit, to prevent unnecessary energy consumption. 256 PROUMIA
ED T-BUIZE SERIE (ED T TUBES SERIES) ED T-Buis 1500 mm ED T Tube 1500 mm 24W ED T buis voor toepassing i.p.v. conventionele fluorescentiebuizen Behuizing gemaakt uit geëxtrudeerd aluminium en voorzien van een polycarbonaat afscherming De afscherming wordt geleverd in transparante en opalen uitvoering ED technologie zorgt voor laag energieverbruik en lange levensduur Besparingen kunnen oplopen tot 70% ten opzichte van fluorescentie oplossingen en een verwachte levensduur die tot vijf maal langer is De uitstraalrichting van de buis is aan te passen door middel van de verstelbare eindkappen (0-180 ) Voeding van de ED T vindt plaats aan één zijde ED starter zorgt voor minimale aanpassing van bedrading in het armatuur Toepassingsgebieden: koel- en vriescellen, parkeergarages, magazijnen, industrie- en kantooromgevingen etc. ED fluorescent tube replacement for conventional fluorescent tubes 0.44 Housing made of extruded aluminum with a polycarbonate cover 408710/.. /.. 6: Transparant 7: Opaal The cover can be supplied in a transparent or milky version ED technology guarantees low power consumption and a long lifetime Energy savings up to 70% and lifetimes up to five times longer compared to fluorescent solutions Beam direction of tube can be adjusted (0-180 ) with adjustable end caps The ED fluorescent tube is powered on one side Fixture rewiring is limited by a special ED starter 3: 3000K, Warm wit Warm white 9: 4000K, Puur wit Pure white 6: 6500K, Koud wit Cool white Applications: cold storage area s, indoor car parks, warehouses, industrial and office environments, etc. ichtbron (ight Source): SMD 3528 ED: 24W Verlichtingshoek (Beam angle): transparant (transparent): 120, opaal (milky): 150 ichtstroom (ight output) ±10%: 3: 3000K 2650lm 2515lm 9: 4000K 2880lm 2736lm 4: 6500K 2740lm 2600lm 25 1498 Kleurweergave index (Color rendering index): Ra 80 Bedrijfstemperatuur (Operating temperature): -20 C - +40 C Aantal branduren (Rated life hours): 50.000 ED voeding (ingebouwd) (ED driver (included)) Voedingsspanning (Input): 110-240 Vac 50/60Hz Cosinus phi (Power factor): 0.95 Aansluitschema Wiring diagram Conventioneel/magnetisch voorschakelapparaat Conventional/magnetic ballast electromagnetische ballast en condensator(en). Rewire according below wiring scheme and bypass existing electromagnetic ballast and capacitor(s). hoogfrequente ballast. Rewire according below wiring scheme and bypass existing high frequency ballast. Vervang de bestaande starter door een ED starter. Replace existing starter with a ED starter. Magnetisch voorschakelapparaat* Magnetic ballast * Ondanks dat de ED buis werkt zonder verdere aanpassingen aan het armatuur, adviseren wij u het VSA en eventuele condensatoren uit het elektrische circuit te verwijderen. Dit om onnodig energieverbruik te voorkomen. * Although the ED tube works without further adjustments to the fitting, we recommend to remove the EB and capacitors (if any) in the electrical circuit, to prevent unnecessary energy consumption. www.prolumia.nl 257