SHP / SHP-T Standard and Basic PLUS

Transcriptie

1 Range Features ErP compliant High Pressure Sodium Lamps Long life between 24,000 to 28,000 hours, T90 at 16,000 hours Strong performance with high reliability Car park, Street and Floodlighting applications PRODUCT OVERVIEW Afwerking lamp clear Vorm lamp tubular Kleurtemperat (K) 2050 CRI (Ra) 20 Dimbaar Yes EAN-code Energieklasse A+ Kap/Voet E40 Top SHP-T Watt (nominaal( (W) 250 Lichtkleur 0 Bestelnummer Rendement (nominaal (lm/w) 122 Nuttige lichtstroom (nominaal (lm) Technologie HID Spanning (V) 100 DATA TABLE Optical data Omgevingstemperat voor maximale lichtstroom ( C) Kleurtemperat (K) CRI (Ra) 20 Lichtkleur 0 Lichtstroom (nominaal) (lm) Page 1 of 5

2 Nuttige lichtstroom (nominaal (lm) General data Ballast vereist yes Afwerking lamp clear Vorm lamp tubular Dimbaar Yes EAN-code Energieklasse A+ Classificatie armat open Algemene toepassing Logistics and Industry; Outdoor IEC-referentie IEC IEC-referentie 2 IEC Beoogd gebruik General lighting Kap/Voet E40 Kwikgehalte lamp (mg) 21.6 Top SHP-T Levensd T Page 2 of 5

3 Opmerkingen Bestelnummer Lange beschrijving Productnaam Nominale overlevingsfactor bij Nominale overlevingsfactor bij Nominale overlevingsfactor bij Nominale overlevingsfactor bij Nominale overlevingsfactor bij Nominale overlevingsfactor bij Nominale overlevingsfactor bij Nominale overlevingsfactor bij 2000 Sylvania SHP lamps can be dimmed with negligible impact on performance creating the potential for flexible light levels and reduced energy consumption. Dimming is supported on electronic square wave ballasts and magnetic systems that can maintain the open circuit voltage. Square wave operation is recommended. Dimming causes a reduction of light and some colour change. We advise to start the lamps at full power and to hold this for 15 minutes before reducing the power. To avoid extinguishing the power should be adjusted gradually taking a few minutes to reach the final dimming condition. Square wave dimming down to 50% of the rated power will have negligible impact on performance, dimming down to 35% of the rated power can affect lumen maintenance and colour appearance. Dimming by means of voltage on magnetic systems is not advised as this increases the chance of lamp extinguishing. Dimming by phase-cutting on magnetic systems is not allowed. Instant dimming on magnetic systems by adding an impedance is suggested down to 50% of the rated power but the average life can be reduced. ErP compliant High Pressure Sodium Lamps Long life between 24,000 to 28,000 hours, T90 at 16,000 hours Strong performance with high reliability Car park, Street and Floodlighting applications Nominale overlevingsfactor bij Nominale overlevingsfactor bij 4000 Nominale overlevingsfactor bij Nominale overlevingsfactor bij Page 3 of 5

4 Nominale overlevingsfactor bij Nominale overlevingsfactor bij 8000 Lamp voor speciaal doeleinde Technologie Transformator vereist Hoeveelheid verpakking verkoop 1 9 No HID E-nummer SE E-nummer FI no Electrical data Stroom (A) 3 Spanning (V) ontsteking 0 kwh per 1000 brandtijd 275 Watt (nominaal( (W) 250 Rendement (nominaal (lm/w) 122 Watt (nominaal) (W) 250 Spanning (V) 100 Physical data Lampdiameter (mm) - D 48 Lamplengte (mm) - C/L 260 Beschrijving verpakking Gewicht (kg) 0.18 Outer package dimensions (L x W x H) (cm) Single package dimensions (L x W x H) (cm) Box/Sleeve x x x 5.00 x 5.00 TECHNICAL DRAWINGS Page 4 of 5

5 Page 5 of 5