Voorbeeld NËN-ISÖ418Ö-1. Preview. Nederlandse. Verpakkingen. Complete, gevulde transportverpakkingen.

Vergelijkbare documenten
Als definitie voor vezelvliezen van textiel is de internationale norm ISO 9092, Ie druk, 1988, als Nederlandse norm aanvaard.

Voor kappen voor puntlaselektroden, is de internationale norm ISO 5821, Ie druk, 1979, als Nederlandse norm aanvaard.

Textiles - Test methods for nonwovens - Part 1: Determination of mass per unit area (ISO :1989)

Voorbeeld. norm NEN-EN Preview

Voorbeeld. norm. Preview NEN-EN-IEC N Nederlands. Optische-vezel connectorverbindingen Deel 4: Connectorfamilie type SC

Photovoltaic devices - Part 6: Requirements for reference solar modules mei 1998 ICS ;

Dit document bevat de officiële Engelse versie van de Europese norm EN 1334, maart 1996.

Voorbeeld. norm NEN-EN Preview. Textiel - Weefsels - Bepaling van de massa per eenheid van oppervlakte met gebruik van kleine monsters

Voorbeeld NËN : ISÖ3903. Preview. Nederlandse. Scheepsbouw en maritieme constructies. Gewone rechthoekige scheepsramen (ISO 3903:1993)

INTERNATIONAL STANDARD Thread run-outs for fasteners with thread in accordance with IS0 261 and IS0 262

Voorbeeld. norm NEN-ISO Preview

Scheepsbouw - Scheepsschroeven - Fabricagetoleranties - Deel 2: Schroeven met een middel lijn vanaf 0,8 m tot en met 2,5 m

Voorbeeld. norm NEN-ISO Preview

Voorbeeld. norm NEN-ISO Preview. Olie van Eucalyptus citriodora Hook (ISO 3044:1997) Nederlandse. Nederlands Normalisatie-instituut

Voorbeeld EN60662/A7. Preview. NNederlands (IEC662:1980/A7:1995) Normalisatie-instituut

Voorbeeld. Preview NEN-EN-ISO 787-9

Voorbeeld NEN-ISO 2341 EN Preview. Gaffelpennen met kop (ISO 2341:1986) Nederlandse s s \ % Vs% s% %ss svi,лs

Voorbeeld. Preview. Hydrauliek en pneumatiek. Cilindermantels. Deel 1 : Eisen voor stalen buizen met speciaal afgewerkte boringen (ISO :1980)

Nederlandse norm. NEN-EN-ISO 6165 (nl) Grondverzetmachines Basistypen Woordenlijst (ISO 6165:1997)

Voorbeeld NEN-ISO Preview. Hydrauliek en pneumatiek. Boringen en zuigerstangmiddellijnen van cilinders. Metrische reeks (ISO 3320:1987)

Voorbeeld. Preview. Correctieblad NEN-ISO 6411/C1. Technische tekeningen Vereenvoudigde tekenwijze van centergaten (ISO 6411:1982) Nederlandse norm

Nederlands Normalisatie-instituut Kalfjeslaan 2, Postbus 5059, 2600 GB Delft, telefoon (015) Г, telex 38144, postrekening 25301

Voorbeeld. norm. Preview NEN-EN 772-3

Voorbeeld. norm Environmental management - Life cycle assessment - Principles and framework (ISO 14040:1997,IDT) Preview. NEN-EN-ISO (en)

Voorbeeld. Preview NEDERLANDSE NORM UDC '24-198:620.1: 543.7:546.74

Voorbeeld. Preview NEDERLANDSE NORM UDC

Voorbeeld. Preview ISO 5208 INTERNATIONAL STANDARD. Industrial valves - Pressure testing of valves

Voorbeeld. Preview ISO INTERNATIONAL STANDARD

Vervangt NEN-EN :2000 Ontw. Nederlandse norm. NEN-EN (en)

Voorbeeld. norm NEN-EN-ISO Preview. Kunststoffen - Onverzadigde polyesterharsen - Bepaling van het hydroxylgetal (ISO 2554:1997) Nederlandse

Voor onderelektroden en klemstukken voor puntlassen is de internationale norm ISO 5827, Ie druk, 1983, als Nederlandse norm aanvaard.

Voorbeeld NEN-EN 577. Preview. N Nederlands. Aluminium en aluminiumlegeringen. Vloeibaar metaal. Specificaties

Voorbeeld. norm NEN-EN-ISO Preview

Nederlandse voornorm NAD-NVN-ENV (nl)

Voorbeeld. Preview. Dit document is een voorbeeld van NEN / This document is a preview by NEN

Building construction - Jointing products - Sealants - Vocabulary (ISO 6927:1981)

Voorbeeld. Preview NEN-EN-ISO Verzonken schroeven met platte kop met zaaggleuf (met eenheidskop). Produktklasse A (ISO 2009:1994) Nederlandse

Samen met NEN-ISO 68-1:1999 vervangt deze norm NEN 81:1982. Nederlandse norm NEN-ISO 724

Voorbeeld. Preview NEN-EN-ISO Tandheelkunde. Tandheelkundig roterend instrumentarium. Diamantinstrumenten. Deel 2: Schijven (ISO :1992)

Dit document bevat de officiële Engelse versie van de Europese norm EN 409, juli 1993

Vervangt NEN 913:1963; NEN 913:1998 Ontw. Nederlandse norm. NEN 913 (nl) Melk en vloeibare melkproducten - Bepaling van de titreerbare zuurtegraad

Voorbeeld. Preview. NEN-IEC /A2 (en; fr) Wijzigingsblad. Nederlandse

Nederlandse norm NEN-EN Afsluiters - Termen en definities - Deel 3: Definitie van basisbegrippen

Vervangt NEN-EN 111:1990; NEN-EN 111:1990/C1:1993; NEN-EN 111:1995 Ontw. Nederlandse norm NEN-EN 111

Voorbeeld. norm NEN-EN Preview. Ontwerp

Refrigerating systems and heat pumps. Safety and environmental requirements. Part 13: Competence

INTERNATIONAL STANDARD. Machine bridge reamers. Alésoirs de chaudronnerie, à machine

Voorbeeld. Preview. NNederlands. I fvi J NEN-EN-ISO/IEC

Voorbeeld. Preview NEN-EN War m gewalste I-profielen met tapsvormige flenzen. Toleranties op vorm en afmetingen. Nederlands

Voor de plaatsing van patrijspoorten in schepen is de internationale norm ISO 5780, Ie druk, 1987, als Nederlandse norm aanvaard.

Voorbeeld. Preview NEN-EN Dit document is een voorbeeld van NEN / This document is a preview by NEN

Nederlandse NEN-EN 10204

Voorbeeld NEN-EN Preview. buizen en profielen. Deel 3: Ronde staven, toleranties op afmetingen en vorm. Nederlandse.

Vervangt NEN-EN :1997; NEN-EN :1999 Ontw. Nederlandse norm. NEN-EN (en)

Vervangt NEN-EN 951-1:1993 Ontw.; NEN-EN 25:1976. Nederlandse norm. NEN-EN 951 (en) Deurbladen - Meetmethode van hoogte, breedte, dikte en haaksheid

Vervangt NEN-EN :1999 Ontw. Nederlandse norm. NEN-EN (en) Terugslagkleppen voor afvoerleidingen - Deel 2: Beproevingsmethoden

NEN VERKLARINGEN. bevat. het model van de overeenstemmingsverklaring. in het kader van de Laagspanningsrichtlijn

Voorbeeld. Preview. Maattoleranties voor de bouw. Begripsomschrijvingen en algemene regels

Vervangt CR :1996; NEN-EN :2003 Ontw. Nederlandse norm. NEN-EN (en)

Dit document bevat de vertaling van de Europese norm EN :1993, 1e druk, september 1993.

Voorbeeld. Preview ISO INTERNATIONAL STANDARD

Nederlandse norm NEN-EN (en) Derivatives from coal pyrolysis - Terminology

Vervangt NPR 3637:1994. Nederlandse praktijkrichtlijn NPR 3637

Voorbeeld. norm. NEN-EN 785 pren 785. Preview. N Nederlands. 2e Ontwerp. Publikatie uitsluitend voor commentaar

Voorbeeld. norm Loodmenie voor verven (ISO 510:1977,IDT) Preview. NEN-ISO 510 (en)

Voorbeeld NEN-EN 872. Preview. Waterkwaliteit. Bepaling van het gehalte aan gesuspendeerde stoffen. Methode door filtratie over glasvezelfilters

Voorbeeld. Preview IS INTERNATIONAL STANDARD. Space data and information transfer systems - ASCII encoded English

Voorbeeld INTERNATIONAL STANDARD Preview. Tangential keys and keyways. First edition UDC Ref. No.

Voorbeeld. Normalisatie-instituut Dit document is een voorbeeld van NEN / This document is a preview by NEN. NNederlands NEN-EN-ISP

Voorbeeld. norm NEN-EN-ISO Preview

Dit document bevat de vertaling van de Europese norm EN , december 1994.

Nederlandse norm NEN-EN (en) Determination of hexavalent chromium in corrosion protection layers - Qualitative analysis

Dit document bevat de vertaling in het Nederlands van de Europese norm EN ISO 13920, augustus 1996.

Voorbeeld. norm NEN-EN Preview. 2e Ontwerp

Nederlandse norm. NEN-EN (en)

Radiators and convectors - Part 2: Test Methods and rating oktober 2003 ICS Vervangt NEN-EN 422-2:1996/Ontw. A2:2002

Safety of toys - Part 1: Mechanical and physical properties januari 2001 ICS Vervangt NEN-EN 71-1:1998/Ontw. A1:2000

International Standard

Nederlandse norm. NEN-EN-ISO 3327 (en) Hardmetals - Determination of transverse rupture strength (ISO 3327:2009,IDT)

Vervangt NEN-EN 50182:1994 Ontw. Nederlandse norm. NEN-EN (en)

Transcriptie:

Nederlandse Verpakkingen. Complete, gevulde transportverpakkingen. Algemene regels voor het opstellen van beproevingsschema's. Deel 1: Algemene principes (ISO 4180-1:1980) NËN-ISÖ418Ö-1 EN 24180-1 Complete, filled transport packages. General rules forthecompilation of performance test schedules. Part 1: General principles (ISO 4180-1:1980) 1e druk, maart 1993 UDC 621.798.1:620.165.7 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This document may only be used on a stand-alone PC. Use in a network is only permitted when a supplementary license agreement for us in a network with NEN has been concluded. Als Nederlandse norm is aanvaard de internationale norm ISO 4180-1,1e druk, 1980. De European Committee for Standardization (CEN) heeftop 1992-10-30 een Europese norm {EN 24180-1) aanvaard, waarbij de internationale norm ISO 4180-1, 1e druk, 1980, ongewijzigd is aangenomen. Behoudens uitzondering door de wet gesteld mag zonder schriftelijke toestemming van het Nederlands Normalisatie-instituut niets uit deze uitgave worden verveelvoudigd en/of openbaar gemaakt door middel van fotokopie, microfilm, opslag in computerbestanden of anderszins, hetgeen ook van toepassing is op gehele of gedeeltelijke bewerking. Het Nederlands Normalisatie-instituut is met uitsluiting van ieder ander gerechtigd de door derden verschuldigde vergoedingen voor verveelvoudiging te innen en/of daartoe in en buiten rechte op te treden, voor zover deze bevoegdheid niet is overgedragen c.q. rechtens toekomt aan de Stichting Reprorecht. De leden van CEN hebben zich verplicht de Europese normen de status van nationale norm te geven. Met de publikatie van deze norm is het Nederlands Normalisatie-instituut deze verplichting nagekomen. Normcommissie 345 93 "Verpakking" Hoewel bij deze uitgave de uiterste zorg is nagestreefd, kunnen fouten en onvolledigheden niet geheel worden uitgesloten. Het Nederlands Normalisatie-instituut en/of de leden van de commissies aanvaarden derhalve geen enkele aansprakelijkheid, ook niet voor directe of indirecte schade, ontstaan door of verband houdende met toepassing van door het Nederlands Normalisatie-instituut gepubliceerde uitgaven. Nederlands Normalisatie-instituut e 1333 Nederlands Normalisatie-instituut Kalfjeslaan 2, Postbus 5059.2600 GB Delft. Telefoon (015) 630 330. Fax (015) 630 130

EUROPEAN STANDARD EN 24180-1:1992 NORME EUROPÉENNE EUROPÀISCHE NORM November 1992 UDC 621.798.1:620.165.7 Descriptors: Packaging, transport packing, complete- and filled packages, operating requirements, tests, performance tests, testing conditions English version Complete, filled transport packages. General rules for the compilation of performance test schedules. Part 1: General principles (ISO 4180-1:1980) Emballages d'expédition complets et pleins. Versandfertige Packstücke. Allgemeine Regeln Règles générales pour l'établissement de fur die Erstellung von Prüfplanen. Teil 1: programme d'essais d'apitude à l'emploi. Partie 1: Allgemeine Grundsàtze (ISO 4180-1:1980) Principes généraux (ISO 4180-1:1980) This European Standard was approved by CEN on 1992-10-30. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxemburg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comité Européen de Normalisation Europâisches Komitee für Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1992 Copyright reserved to all CEN members Ref. No. EN 24180-1:1992 E

Page 2 EN 24180-1:1992 Foreword In 1991, ISO 4180-1:1980 "Complete, filled transport packages. General rules forthe compilation of performance test schedules. Part 1: General principles" was submitted to the CEN Primary Questionnaire procedure. Following the positive result of the CEN/CS Proposal ISO 4180-1:1980 was submitted to the Formal Vote. The result of the Formal Vote was positive. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 1993, and conflicting national standards shall be withdrawn at the latest by May 1993. According to the CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxemburg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom. Endorsement notice The text of the International Standard ISO 4180-1:1980 was approved by CEN as a European Standard without any modification.

NEN-ISO 4180-1:1993 en International Stadard 4180/l ~~ INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONOME~YHAP~AHAR opratw3a~b4~ no CTAH~APT~~A~.~~~F~GAWI~ATI~N INTERNAT~ONALE DE RORMALISATION ~~ Complete, filled transport packages - General rules for the compilation of performance test schedules - Part 1 : General principles Emballages d expbdition comple ts et pleins - R&gles g&&ales pour IWablissemen t de programmes d essais d ap titude A l emploi - Partie 7 : Principes g&&aux First edition - 1980-08-01 UDC 621.796.1 : 620.16 Ref. No. IS0 4180/l-1980 (E) Descriptors : packages, transport packages, complete and filled packages, performance tests, testing conditions. Price based on 5 pages

NEN-ISO 4180-1:1993 en Foreword IS0 (the International Organization for Standardization) is a worldwide federation of national standards institutes (IS0 member bodies). The work of developing International Standards is carried out through IS0 technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the IS0 Council. International Standard IS0 4180/l was developed by Technical Committee ISO/TC 122, Packaging, and was circulated to the member bodies in March 1979. It has been approved by the member bodies of the following countries : Australia Austria Belgium Brazil Bulgaria Canada Chile Czechoslovakia Denmark Egypt, Arab Rep. of France Germany, F. R. Hungary India Ireland Israel Japan Libyan Arab Jamahiriya Malaysia Netherlands New Zealand Poland Romania South Africa, Rep. of Spain Sweden Turkey United Kingdom USA USSR Yugoslavia The member body of the following country expressed disapproval of the document on technical grounds : Italy 0 International Organization for Standardization, 1980 a Printed in Switzerland ii

Bestelformulier Stuur naar: NEN Standards Products & Services t.a.v. afdeling Klantenservice Antwoordnummer 10214 2600 WB Delft NEN Standards Products & Services Postbus 5059 2600 GB Delft Vlinderweg 6 2623 AX Delft Ja, ik bestel ex. NEN-ISO 4180-1:1993 en Verpakkingen - Complete, gevulde transportverpakkingen - Algemene regels voor het opstellen van beproevingsschema's - Deel 1: Algemene principes 34.41 T (015) 2 690 390 F (015) 2 690 271 www.nen.nl/normshop Wilt u deze norm in PDF-formaat? Deze bestelt u eenvoudig via www.nen.nl/normshop Gratis e-mailnieuwsbrieven Wilt u op de hoogte blijven van de laatste ontwikkelingen op het gebied van normen, normalisatie en regelgeving? Neem dan een gratis abonnement op een van onze e-mailnieuwsbrieven. www.nen.nl/nieuwsbrieven Gegevens Bedrijf / Instelling T.a.v. O M O V E-mail Klantnummer NEN Uw ordernummer BTW nummer Postbus / Adres Postcode Plaats Telefoon Fax Factuuradres (indien dit afwijkt van bovenstaand adres) Postbus / Adres Postcode Plaats Datum Handtekening Retourneren Fax: 015 2 690 271 E-mail: klantenservice@nen.nl Post: NEN Standards Products & Services, t.a.v. afdeling Klantenservice Antwoordnummer 10214, 2600 WB Delft (geen postzegel nodig). Voorwaarden De prijzen zijn geldig tot 31 december 2018, tenzij anders aangegeven. Alle prijzen zijn excl. btw, verzend- en handelingskosten en onder voorbehoud bij o.m. ISO- en IEC-normen. Bestelt u via de normshop een pdf, dan betaalt u geen handeling en verzendkosten. Meer informatie: telefoon 015 2 690 391, dagelijks van 8.30 tot 17.00 uur. Wijzigingen en typefouten in teksten en prijsinformatie voorbehouden. U kunt onze algemene voorwaarden terugvinden op: www.nen.nl/leveringsvoorwaarden. LEREN, WERKEN EN GROEIEN MET NEN preview - 2018