Fan Coil Unit Controller

Maat: px
Weergave met pagina beginnen:

Download "Fan Coil Unit Controller"

Transcriptie

1 Metasys European Sales Resource Manual Application Specific Controllers Section Product Bulletin Issue Date 0198 Fan Coil Unit Controller The TC-9102 Series Fan Coil Unit Controller is designed for digital control of fan coil units with heating and/or cooling coils, and a single-speed, three-speed or variable-speed fan. The comfort set point and occupancy mode may be adjusted from the TM-9100 Series Room Command Module, which can also provide manual override of fan speed in three-speed fan applications. The intelligent room command module also provides local weekly time scheduling control. The controller is designed for field installation or for use by original equipment manufacturers. The fan coil unit controller can operate in standlone mode with local room override control, or it can communicate on the Metasys N2 Bus, allowing monitoring and facility-wide control applications on the network. Figure 1: TC-9102 Controller Figure 2: TM-9160 and TM-9180 Series Room Command Modules Features and Benefits Range of models designed for field and factory installations Relay outputs for fan control Choice of output types for heating and cooling control Software configuration tool Library of configurations for all models Multiple modes of operation for various occupancy conditions Setpoint adjustment and mode override from room command module Low-cost installation for a wide range of fan coil unit applications Ease of configuration and commissioning Comfort with economy Local control by occupants Local display of room temperature and set point in intelligent room command module Weekly time schedule option in intelligent room command module N2 Bus communications for supervisory network Dynamic Data Access networking software capabilities Standalone operation Nonvolatile memory (EEPROM) Facility-wide control efficiency and cost-effective information sharing System reliability 1998 Johnson Controls, Inc. 1 Order No. MET-SRM-C4-03

2 Power R/T Power R/T Power R/T ME T A S Y S T C9102 ME T A S Y S T C9102 ME T A S Y S T C9102 Po wer R/T ME T AS Y S T C9 102 N1 LAN NCM 300 NCM 300 Operator Worksta tion K +3-3 K +3 TC-9102 TM-9160 TC-9102 TM K TC-9102 TM-9160 DX-9100 XT-9100 XT-Bus TC-9102 set esc TM-9180 XTM XT-9100 N2 Bus N2 Bus XTM XTM Figure 3: Fan Coil Unit Controller on the Metasys Network 2 Application Specific Controllers Fan Coil Unit Controller

3 Companion Workstation 0 Power METASYS K R/T TC9102 TM-9160 TC-9102 XTM Power METASYS R/T set esc TM-9180 TC-9102 TC9102 N2 Bus DX-9100 XT-Bus XT-9100 XT-9100 Figure 4: Metasys Companion with Fan Coil Unit Controller Application Specific Controllers Fan Coil Unit Controller 3

4 O ccupancy Comfort with Economy and Flexibility The fan coil unit controller offers three modes of operation -- comfort, standby and night -- which can be set from an operator workstation on a Metasys network, or controlled by the local room occupants with override possibilities from the supervisory network. In the simplest and most economical option, a room command module provides the occupant with set point control and a button to switch between comfort and standby modes. Set point adjustment can be restricted within a certain range to allow occupants control over their environment, but not to compromise energy savings. A second option uses an intelligent room command module which has a digital display and shows the current room temperature, set point, time of day and mode of operation. The occupant may adjust the set point and override the mode of operation and fan speed. The intelligent room command module may also be equipped with a time schedule which allows the occupant to enter a weekly schedule for comfort, standby and night modes and to manually set the controller to any mode, overriding the time schedule. This option gives maximum flexibility to the occupant and allows maximum energy savings when there is no supervisory network installed. Whatever local options are chosen, the controller operating mode can be taken over by the supervisory network and local control is automatically restored if the supervisory network becomes unavailable for any reason. A window open sensor may be connected to the controller to switch it to off mode to avoid energy loss. The off mode may also be set by the supervisory network when the space is not in use. Every controller has a low limit function as a standard feature which will operate when a low room temperature is detected, and override any automatic, time schedule, or manual mode of the controller. W inter/summer Compensation Feature When the controller is connected to a network and is receiving the outdoor air temperature reading, the room set point may be automatically adjusted on cold winter days or hot summer days to reduce energy consumption yet maintain occupancy comfort. In winter the set point temperature may be increased to offset the effect of cold surfaces in exterior zones. H ardware Configuration to Match Applications Various controller hardware models are available to match a wide range of fan coil unit control applications. Each model provides a specific combination of outputs to control heating, cooling and the fan. All models accept inputs for the local control of occupancy mode, temperature set point, fan speed override and shutoff from a window contact. The temperature sensor may be mounted in the fan coil unit or in the room command module. 4 Application Specific Controllers Fan Coil Unit Controller

5 Table 1: Controller Output Options Heating and Cooling Outputs 0 to 10 VDC analog (10 ma) Pair of triacs (24 VAC, 0.5 ma) for: incremental control (Position Adjust Type) duration adjust on time cycle two-stage on/off Fan Control Outputs Single relay contact for on/off fan (230V 3A) Three relay contacts for three-speed fan (230V 3A) 0 to 10 VDC analog (10 ma) for fan speed controller Table 2: Controller Inputs Room Temperature Set Point Adjust Occupancy Mode Override Three-Speed Fan Override Window Sensor Occupancy Sensor NTC sensor (in room command module or mounted in fan coil unit) 12 to 28 C or +/-3 K from room command module Comfort/Standby Auto/Off/1/2/3 (in comfort mode) Volt-free contact (closed = window closed) Volt-free contact (closed = occupied) C onvenient Configuration Setup The fan coil unit controller is delivered with the appropriate software and hardware configuration and with factory-set parameters such that no onsite programming is necessary to set the fan coil unit into operation. A software tool is available, however, which runs on a laptop or notebook PC, to enable the installer to adjust operating parameters such as standby mode and night mode set points and control loop tuning parameters, if required, and to provide online data for the verification of the control sequence. A record of all parameter changes can be stored in memory or on diskette. Once configured, commissioned, and connected to a network, the controller s operating parameters may be changed from a Metasys operator workstation. The controller has additional capabilities to help manage your facility. For example, the user can assign high and low alarm limits to analog inputs, which will alert an operator at the Metasys operator workstation when a problem occurs, such as a room temperature exceeding comfort or safety limits. Application Specific Controllers Fan Coil Unit Controller 5

6 N etworking Capabilities As powerful as the controller is by itself, your facility will benefit even more when fan coil unit controllers are part of a larger Metasys network. Each fan coil unit controller can be connected to the Metasys N2 Bus. Either a network control module (NCM) or workstation can be programmed to provide added energy management and supervisory control capabilities, such as optimal start, demand limiting, trend log, run-time totalization, and more. The Metasys Dynamic Data Access networking software, available from the network control P recise, Flexible Control As a member of the fully integrated system or as a standalone controller, the fan coil unit controller represents the best way to fully optimize the operation of your distributed HVAC module, makes all information from each controller available throughout the facility. This makes it possible, for example, to reset supply water temperatures based on the load demands of the fan coil unit controllers, and to adjust the room set points based on a common outdoor air temperature for the building or each zone of the building. Dynamic Data Access also makes sensor values, operating status, and any other parameters in the controller available to operators anywhere in your facility. equipment. It combines ease of setup and operation, flexibility of application, and precise control for comfort and energy management. 6 Application Specific Controllers Fan Coil Unit Controller

7 Notes Application Specific Controllers Fan Coil Unit Controller 7

8 S pecifications TC-9102 Fan Coil Unit Controller Product TC-9102 Series Fan Coil Unit Controller TC-9102 Series for remote set point TC-9112 Series with integral setpoint Available with fixed or separable terminals Power Requirements 24 VAC, ±15%, at 50/60 Hz, 3 VA (not including actuating devices) Ambient Operating 0 to 50 C / 32 to 120 F Conditions 10 to 90% RH Noncondensing Ambient Storage -20 to 70 C / 0 to 160 F Conditions 10 to 95% RH Dimensions (H x W x D) 108 x 118 x 31 mm / 4.3 x 4.7 x 1.2 in. Shipping Weight 0.3 kg / 11 oz TM-9100 Series Room Commmand Modules Product TM-9100 Series Room Commmand Modules TM-9150 Series Without set point dial TM-9160 Series With set point dial and optional fan speed override TM-9170 Series As TM-9160, but without NTC Room Temperature Sensor TM-9180 Series Intelligent room command module with digital display and weekly time scheduling control TE Unit Mount NTC Room Temperature Sensor Supply Voltage Power from TC-9102 Series Controller Ambient Operating 0 to 40 C / 32 to 104 F Conditions 10 to 90% RH Noncondensing Ambient Storage -20 to 70 C / 0 to 160 F Conditions 10 to 95% RH Dimensions (H x W x D) 80 x 80 x 33 mm / 3.2 x 3.2 x 1.3 in. Shipping Weight 0.15 kg / 6 oz The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these specifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. Metasys is a registered trademark of Johnson Controls. Johnson Controls International Westendhof 8 Metasys European Sales Resource Manual Essen Rev. Level 0198 Germany Printed in Germany 8 Application Specific Controllers Fan Coil Unit Controller

9 Metasys Network Sales Resource Manual 635 Application Specific Controllers Section Product Bulletin Issue Date 1095 TC-9102 Terminal Controller The TC-9102 Terminal Controller, the latest addition to the application specific controller product line, is an electronic device for digital control of fan coil unit applications. Four controller models offer a competitive advantage for those projects that require a Direct Digital Control (DDC) fan coil application. You can easily configure point inputs and outputs for control of the fan coil as either a standalone controller or connected to the Metasys Network through a Network Control Module (NCM), or through the Companion System. Figure 1: TC-9102 Fan Coil Controller Features and Benefits HVAC PRO for Windows, Release 6.00 N2 Bus Communication Compact Size On/Off, 3-speed, and Proportional Speed Fan Internal Relays N2 Opto-Isolation Wall-mounted Thermostat with Setpoint Dial and Occupancy Button on Cover Easy to configure and commission Facility-wide control efficiencies Ideal for space limited installation Maximum comfort and control No additional relays required for motors up to and including 1/8 hp Minimum electrical noise User-friendly adjustment 1995 Johnson Controls, Inc. 1 Code No. LIT

10 Standalone Operation or Networking Capabilities Choices for application needs 2 Application Specific Controllers TC-9102 Terminal Controller

11 A pplication The TC-9102 Terminal Controller is targeted for application specific DDC control similar to the existing UNT and VAV controllers. However, unlike the VAV, heating and cooling can be sequenced from a single output. And, unlike the VAV and UNT, it has 3-speed fan control. The TC-9102 is the perfect solution for fan coil unit applications and features four different models. The type of model used is determined by the type of fan control and heating/cooling control required. The control functions are HVAC PRO for Windows (Release 6.00) configurable. The HVAC PRO for Windows (Release 6.00) software sets the control modes. The occupancy sensor input and the occupancy button (on the TM-9100 thermostat) modify the control modes. A low limit temperature function is a standard feature, which overrides any automatic, time schedule, or manual mode when a low temperature is detected. When an outdoor temperature is received from a network, the room setpoint will automatically adjust to reduce energy consumption, while maintaining occupancy comfort. Table 1: Ordering TC-9102 Models Points Rating Fan: On/Off Heat/Cool: 0 to 10 VDC Analog Inputs: Zone Temperature Remote Setpoint Fan Override (-0332 only) Binary Inputs: Window Contact Occupancy Sensor Occupancy Button on Thermostat Analog Outputs: Heat/Cool (2-proportional) Fan Binary Outputs: Heat/Cool (4-incremental) Fan 32 to 105 F (NTC) 0 to 10K ohms (Potentiometer) 0 to 10K ohms (Potentiometer) <1K ohms <1K ohms <1K ohms 10 ma at 10 VDC maximum 10 ma at 10 VDC maximum 0.5 Amperes at 24 VAC 3 Amperes at 120/250 VAC Fan: 0 to 10 VDC Fan: On/Off Heat/Cool: Incremental* Fan: 3-Speed * 2-stage, PAT, or DAT heating/cooling control options available. Both heating/cooling must use the same option. N ew Sensors In order to complete your TC-9102 fan coil application, you must order the new TM-9100 thermostat. The TM-9100 has sleek styling with an adjustable dial on the thermostat face for ease of use. It also has Light Emitting Diode (LED) indicators and an occupancy button feature for mode override. The TM-9100 uses a Negative Temperature Coefficient (NTC) sensor. The TC-9102 is not compatible with the TE-6400 series thermostat or with the TM-9100 series thermostat. 4 Application Specific Controllers TC-9102 Terminal Controller

12 C onvenient Configuration Designed for fan coil unit applications, the TC-9102 Controller can be easily configured using the HVAC PRO for Windows software tool. Programs loaded into the TC-9102 are saved in nonvolatile E 2 PROM memory, so there is no need to reload software after a loss of power. You can load the configuration from a laptop via the N2 Bus. This commissioning allows you to load multiple controllers from one location. Configuring the TC-9102 is a simple matter of responding to a series of yes/no and multiple choice questions, and then specifying setpoints and other parameters. Metasys Network Configuration Your facility benefits even more when the TC-9102 Controller is part of larger Metasys Network. The TC-9102 can connect to the Metasys via the N2 Bus to either a Network Control Unit or Companion System. When using the network configuration, the TC-9102 may be downloaded via remote access or HVAC PRO for Windows running on a Metasys Operator Workstation. S pecifications Supply Voltage 24 VAC, -15% to +10%, Hz Power Consumption 3 VA Controller and Room Command Module Ambient Operating Conditions 32 to 122 F (0 to 50 C) 10 to 90% RH non-condensing Ambient Storage Conditions -40 to 158 F (-40 to 70 C) 10 to 90% RH non-condensing Terminations Terminal block for one 1.5 mm 2 / 16 AWG (maximum) cable and 14 AWG for fan terminal block. Rated for 4 lb in maximum torque. Serial Interfaces Optically isolated RS-485 interface for N2 Bus connection; 9600 baud Controller Addressing 1 to 255 selectable on DIP switches (6) and jumpers (2) Mounting DIN rail or surface (two brackets supplied with controller) Housing Material: ABS + polycarbonate, self-extinguishing UL94 V0 Protection: IP30 (IEC529) Dimensions (H x W x D) 4.65 x 4.25 x 1.22 in. (118 x 108 x 31 mm) Standard Terminals Allow an extra 0.43 in. for Communications terminal. Shipping Weight 0.66 lb (0.3 kg) Inputs Room Temperature Sensor NTC Thermistor 32 to 105 F (0 to 40 C) Remote Setpoint 10K ohm potentiometer 3-speed Fan Override 10K ohm potentiometer Occupancy Button Momentary Contact } Room Command Module TM-9100 Continued on next page... Window Contact Occupancy Sensor Closed (<1K ohm) = window closed Closed (<1K ohm) = occupied Application Specific Controllers TC-9102 Terminal Controller 5

13 Specifications (Cont.) Outputs Heating/Cooling Control Analog 0 to 10 VDC, maximum 10 ma 2 DAT Triacs rated at 24 VAC, maximum 0.5A* 2 PAT Triacs rated at 24 VAC, maximum 0.5A* 2-stage On/Off Triacs rated at 24 VAC, maximum 0.5A* * Maximum 1 ma leakage current PWM (Europe only) For solenoid valves with Power Driver Module (VA ) only. Fan Control On/Off Relay contact rated at 125/250 VAC, maximum 3A maximum 1/8 hp 3-speed Relay contact rated at 125/250 VAC, maximum 3A maximum 1/8 hp Proportional 0 to 10 VDC, maximum 10 ma Standards Compliance IEEE 446 IEEE 472 IEEE 587 Category A FCC Part 15, Subpart B, Class A UL 916 CSA C22.2 No. 205 (Pending) Agency Listings UL Listed and CSA Certified as part of the Metasys Network. Accessories Order separately Configuration Tools 1.0 WS-WINPRO-0 (contains HVAC PRO for Windows 6.00) HVAC PRO for Windows AS-CBLPRO-2 Cable Converter MM-CVT101-0 Zone Sensors TM-9100 Series Enclosure Kit AS-ENC100-0 or EN-EWC10-0 or EN-EWC15-0 Power Supply AS-XFR100 or AS-XFR50-1 or Y65XX-X Series The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these specifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. Controls Group FAN E. Michigan Street Metasys Network Sales Resource Manual P.O. Box 423 Printed in U.S.A. Milwaukee, WI Application Specific Controllers TC-9102 Terminal Controller

14 Metasys European Sales Resource Manual Application Specific Controllers Section Product Bulletin Issue Date 1298 DX-9100 Digital Controller, Version 1 The DX-9100 Digital Controller is the ideal digital control solution for multiple chiller or boiler plant control applications, for the HVAC process of air handling units or for distributed lighting and related electrical equipment control applications. As a standalone controller, the DX has both the hardware and software flexibility to adapt to the variety of control processes found in its targeted applications. Along with its outstanding control flexibility, the controller can extend its input and output point capability by communicating with input/output (I/O) extension modules on an extension bus, and provides monitoring and control of all connected points at its built-in LED display. When integrated into a full Metasys network, point and control information is available throughout the network, and at all Metasys operator workstations. Figure 1: DX Features and Benefits Full set of control algorithms in software modules Graphic configuration tool Standalone control Easy to configure for a wide range of standard and special applications Distributed control for system reliability Real-time clock and time programs Trend data storage Extension bus for additional I/O points Extension modules for a variety of analog and digital I/O combinations Built-in local status display and control panel Optional manual override switches on extension modules N2 Bus communications Dynamic Data Access capabilities with Metasys network Modular hardware set for low-cost installation in the various applications Display and override capabilities are available close to the controlled equipment Facility-wide control efficiency and costeffective information availability 1998 Johnson Controls, Inc. 1 Order No. MET-SRM-C4-15

15 N1 LAN NCM311/361 NCM311/361 Operator Workstation DX-9100 XT XP DX-9100 XT XP N2 Bus DX-9100 XTM XPx XPx XT-Bus Figure 2: DX-9100 Digital Controller, Version 1, on the Metasys Network 2 Application Specific Controllers DX-9100 Digital Controller, Version 1

16 I nstallation The DX-9100 Digital Controller, Version 1, has field wiring terminals inside the controller enclosure. It is designed for installation inside a control panel or on the controlled equipment via DIN rail. Figure 3: DX-9100 on a DIN Rail 2860 E xtension Modules The extension (XT and XTM) and expansion (XP) modules may be mounted next to the controller on the same DIN rail, or remotely, up to 1200 m from the controller. An extension module set is assembled from submodules, providing various combinations of analog and digital (binary) I/O points. Up to eight extension modules can be connected to the controller via the RS-485 extension bus.. The XTM extension module and its expansion modules provide a wider and more flexible range of I/O options as well as a manual override option on outputs Figure 4: Extension Modules with Manual Override Application Specific Controllers DX-9100 Digital Controller, Version 1 3

17 S ensors and Actuators to Complete the System The DX Controller and extension modules are matched to a family of sensors, actuators, control valves, and dampers needed to complete the control of chiller and boiler plants, HVAC processes and other refrigeration and heating applications. Its sensor inputs can accept 0-10V transmitters and passive temperature sensors from the Johnson Controls range, as well as industry standard 4-20mA transmitters. Outputs are available to control both proportional and incremental electric actuators, as well as motor control relays, staged heating and cooling and other electrical equipment such as lighting control relays. Pneumatic actuators may be controlled by the use of an external transducer Figure 5: Flow Temperature Sensor Figure 6: Room Temperature Sensor Table 1: Point Configuration Point Type Quantity Characteristics DX-9100 XT XTM Analog Inputs 8 6 4/ VDC (impedance 300 KΩ) 0/4-20 ma DC (impedance 100 Ω) RTD Ni1000 (JCI), A99 (JCI), and Pt1000 (DIN) XTM only: RTD Pt100 (DIN), Ni100 (DIN), potentiometer (5 Kohm) Digital (Binary) Inputs 8 4/8/16 4/8/16 Dry Contacts (potential free) Digital (Binary) Outputs 6 4/8/16 2 4/8/16 24 VAC Triacs (minimum 0.05 amps, maximum 0.5 amps) XT/XTM only: Relay Contact (250 VAC 3 amps) XTM only: Relays with momentary, magnetically latched or electrical hold operation Analog Outputs 2 2 4/ VDC (10 ma maximum) or 0/4-20 ma DC 4 Application Specific Controllers DX-9100 Digital Controller, Version 1

18 Table 2: XT/XTM Bus Configuration Maximum number of XT/XTMs per DX 8 Maximum number of I/Os for each XT/XTM Maximum number of I/Os from XT/XTMs per DX 8 analog + 8 digital (binary), or 16 digital (binary) 64 C onvenient Configuration Setup The DX-9100 Digital Controller does not need to be programmed in the traditional sense. Instead, the control algorithms, time programs and input/output point assignments are configured with the use of a Graphic Configuration Tool, which runs under the Microsoft Windows operating system. The graphic software is installed on a laptop computer which is connected to the controller s N2 Bus for loading the controller s configuration. Program data and parameters loaded into the controller and into the extension modules are stored in EEPROM, so there is no need to reload software after a loss of power. Real time and operating data in the controller are stored in battery backed RAM. Configuring a controller and its extension modules is a simple matter of selecting desired module types to form a flow chart diagram, connecting inputs to control and logic blocks, and closing the control loop by making the connection from the control and logic blocks to the outputs. As the flow chart is being filled in, the set point parameters, gains, alarm limits, start and stop times, etc., are added to the control and logic blocks and inputs and outputs to complete the configuration. Names may be entered for inputs, outputs and operating parameters for documentation purposes and for electronic transfer to the Metasys Workstation data file. B uilt-in Display Panel Once the controller and its extension modules are configured, the operating parameters and input/output values can be seen at the display panel built into the controller. Outputs can be manually overridden and operating parameters may be changed by an operator who has plugged his security key into the controller. The same information viewed on the face of the controller can be displayed and changed from any of the Metasys operator devices, or from the Graphic Configuration Tool when in online commissioning mode. A pplication Versatility The DX-9100 Digital Controller can be configured to meet a wide variety of basic HVAC and multiple boiler or chiller central plant applications. Configurations may be preconfigured for common applications to use as a foundation to customize your particular needs. If the pre-configured examples don t cover your needs, you can start with a blank flow chart template on the Graphic Configuration Tool, and configure a totally customized process to meet your specific application requirements. In addition, points unused in the control application can be used for supplementary supervisory purposes by the Metasys network. Application Specific Controllers DX-9100 Digital Controller, Version 1 5

19 Table 3: Flow Chart Module Configuration Options Flow Chart Module Analog Inputs Control Blocks Digital Inputs Calculation Blocks Logic Blocks Time Schedule Blocks Analog Outputs Digital Outputs (DX Controller) Digital Outputs (XT/XTM Modules) Trend Log Configuration Options Sensor/transmitter ranging High/low limits Filter constants Square root PID loops Remote reset logic Operation modes Control limits and alarms Sequencer and step control logic Source points for logic functions Pulse counters Averaging Minimum or maximum select Enthalpy, wet bulb and dew point Input selector Arithmetic calculator Compare logic Line segment function Timer functions Run-time counter Totalizer and Integrator And, Or, Not State change detect Set and reset of parameters Yearly holiday calendar Start-stop times for days of week and holidays Optimal start/stop modules (2 modules available) High/low ranging Incremental, with or without feedback Duration adjust type On/off, including pulse and start/stop On/off, including pulse and start/stop 12 channels Analog or binary values Sample rate Full buffer (read request) indicator 6 Application Specific Controllers DX-9100 Digital Controller, Version 1

20 N etworking Capabilities As powerful as the DX-9100 Digital Controller is by itself or with extension modules, your facility will benefit even more when controllers are part of a larger Metasys network. A Metasys Network Controller Module (NCM) can be programmed to provide added energy management and supervisory control capabilities, such as trend log, historical data storage, electrical demand limiting and more. In remote locations, the trend log data in the controller can be transferred to the central Metasys network by a switched telephone line connection. The Metasys Dynamic Data Access networking software, available from the Network Controller Module, makes information from each controller available throughout the facility, so that it is possible, for example, to reset the boiler or chiller discharge temperature set point based on the demand requirements of a group of terminal unit controllers. Dynamic Data Access also makes sensor values, operating status, and other parameters in the controller available to operators anywhere in your facility. P recise, Flexible Control The DX Controller represents the best way to fully optimize the operation of your refrigeration, heating, HVAC or lighting equipment control applications. It can be used as a member of the fully integrated Metasys system, or as a standalone controller. It combines ease of setup and operation, flexibility of application, and precise control for comfort and energy management. P assword Protection of Configurations The DX Controller has an optional feature to prevent unauthorized access to its software configuration. When a configuration is loaded by the Graphic Configuration Tool with a userdefined password, it cannot be uploaded by another tool unless the password is entered. This feature has been designed to protect standard configurations of OEM (Original Equipment Manufacturer) users. S pecifications DX-9100 Digital Controller, Version 1 Product Code Power Requirements DX-9100 Digital Controller, Version 1 (DX ) (See also Table 1.) 24 VAC ± 15 %, 10 VA (at 24 VAC) at 50/60 Hz To maintain an active power sensor supply > 15 VDC, the supply voltage must always exceed (24 VAC - 10%). Ambient Operating 0 to 40 C / 32 to 100 F Conditions 10 to 90% RH Noncondensing Ambient Storage -20 to 70 C / 0 to 160 F Conditions 5 to 95% RH Noncondensing Dimensions (H x W x D) Shipping Weight Agency Listings 148 x 184 x 81 mm / 5.8 x 7.3 x 3.2 in. Controller: 1.8 kg / 4 lbs CE Directive 89/336/EEC EN50081/1, EN50082/1 UL Listed, CSA Certified, FCC Compliant Application Specific Controllers DX-9100 Digital Controller, Version 1 7

21 Extension and Expansion Modules Product Codes Product Codes XT and XP Modules without Manual Override XT-9100 Extension Module XP Analog Inputs, 2 Analog Outputs XP Digital (Binary) Outputs (triacs) XP Digital (Binary) Inputs, 4 Digital Outputs (triacs) XP Digital (Binary) Inputs XP Digital (Binary) Outputs (relay) (European Model) XP Digital (Binary) Outputs (relay) (North American Model) (See also Table 1) XTM and XPx Expansion Modules with Manual Override Option on Outputs XTM-905 Extension Module XPA Analog Inputs XPA Analog Outputs XPA Analog Inputs, 2 Analog Outputs XPB Binary Inputs XPM Binary Inputs, 2 Momentary Relay Binary Outputs XPL Binary Inputs, 3 Latching Relay Binary Outputs XPE Binary Inputs, 3 Electrically Latching Relay Binary Outputs XPE Binary Inputs, 4 Electrically Latching Relay Binary Outputs XPT Binary Inputs, 4 Binary Outputs (Triacs) XPT Binary Outputs (Triacs) (Manual Override not available.) (See also Table 1) 5.5 VA 4 VA - 1 VA 2 VA 6 VA 6 VA 5.5 VA 4 VA 6 VA 4 VA 3 VA 4 VA 5 VA 5 VA 6 VA 2 VA - Agency Listing All Modules: CE Directive 89/336/EEC EN , EN XPM, XPL and XPE only: CE Directive 73/23/EEC EN All modules, except XPA-4xx-x: UL Listed, CSA Certified, FCC Compliant Power Requirements Extension Module Expansion Modules Transformer Module Dimensions (H x W x D) (1 Module) Shipping Weight 24 VAC +10% / -15 %, 50/60 Hz, 5.5 VA at 24 VAC 24 VAC +10% / -15 %, 50/60 Hz, see above for VA ratings at 24 VAC 230 VAC, 50/60 Hz, up to 12 VA 118 x 70 x 57 mm / 4.7 x 2.8 x 2.3 in. Extension Module: 0.15 kg / 5.3 oz Expansion Module: kg / oz, depending on module type Transformer Module: 0.47 kg / 1 lb 1 oz The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these specifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products, and reserves the right to change or supplement the contents of this publication. Metasys is a registered trademark of Johnson Controls. Microsoft Windows is a registered trademark of the Microsoft Corporation. Johnson Controls International Westendhof 8 Metasys European Sales Resource Manual Essen Rev. Level 1298 Germany 8 Application Specific Controllers DX-9100 Digital Controller, Version 1 Printed in Germany

SPX Model A-360 Azimuth Antenna Rotor Model 1 & 2

SPX Model A-360 Azimuth Antenna Rotor Model 1 & 2 Gauke Boelensstraat 108 NL-9203 RS Drachten The Netherlands Tel: +31 (0) 512 354 126 GSM: +31 (0) 650 882 889 Fax: +31 (0) 847 187 776 www.rfhamdesign.com E-mail: info@rfhamdesign.com Model A-360 Azimuth

Nadere informatie

Activant Prophet 21. Prophet 21 Version 12.0 Upgrade Information

Activant Prophet 21. Prophet 21 Version 12.0 Upgrade Information Activant Prophet 21 Prophet 21 Version 12.0 Upgrade Information This class is designed for Customers interested in upgrading to version 12.0 IT staff responsible for the managing of the Prophet 21 system

Nadere informatie

Intelli Air Valve (iav)

Intelli Air Valve (iav) Intelli Air Valve (iav) Intelligent control valve with CO 2 or humidity measurement NEW A compact solution for apartment blocks Quick and easy to install and maintain Ø 125 mm & Ø 160 mm Central or zonal

Nadere informatie

Settings for the C100BRS4 MAC Address Spoofing with cable Internet.

Settings for the C100BRS4 MAC Address Spoofing with cable Internet. Settings for the C100BRS4 MAC Address Spoofing with cable Internet. General: Please use the latest firmware for the router. The firmware is available on http://www.conceptronic.net! Use Firmware version

Nadere informatie

HANDLEIDING - ACTIEVE MOTORKRAAN

HANDLEIDING - ACTIEVE MOTORKRAAN M A N U A L HANDLEIDING - ACTIEVE MOTORKRAAN MANUAL - ACTIVE MOTOR VALVE Model E710877 E710878 E710856 E710972 E710973 www.tasseron.nl Inhoud / Content NEDERLANDS Hoofdstuk Pagina NL 1 ALGEMEEN 2 NL 1.1

Nadere informatie

Introductie in flowcharts

Introductie in flowcharts Introductie in flowcharts Flow Charts Een flow chart kan gebruikt worden om: Processen definieren en analyseren. Een beeld vormen van een proces voor analyse, discussie of communicatie. Het definieren,

Nadere informatie

it600 Smart Home Range

it600 Smart Home Range MAKING LIFE SIMPLE Smart Thermostat VS20 and TRV10RFM Door/Window Sensor OS600 Smart Plug SPE600 it600 Smart Home Range 2 Index Introduction... 5 The SALUS it600 Smart Home App... 6 Gateway and VS20 Thermostat...

Nadere informatie

SPX AX-400 Azimuth & Elevation antenna rotator Model 1 & 2

SPX AX-400 Azimuth & Elevation antenna rotator Model 1 & 2 Gauke Boelensstraat 108 NL-9203 RS Drachten The Netherlands Tel: +31 (0) 512 354 126 GSM: +31 (0) 650 882 889 Fax: +31 (0) 847 187 776 www.rfhamdesign.com E-mail: info@rfhamdesign.com SPX AX-400 Azimuth

Nadere informatie

Handleiding Installatie ADS

Handleiding Installatie ADS Handleiding Installatie ADS Versie: 1.0 Versiedatum: 19-03-2014 Inleiding Deze handleiding helpt u met de installatie van Advantage Database Server. Zorg ervoor dat u bij de aanvang van de installatie

Nadere informatie

Concept of Feedback. P.S. Gandhi Mechanical Engineering IIT Bombay

Concept of Feedback. P.S. Gandhi Mechanical Engineering IIT Bombay Concept of Feedback P.S. Gandhi Mechanical Engineering IIT Bombay Recap Goal of the course: understanding and learning Assignments: optional to start with Contact hour with TAs: Monday AN: time? Meeting

Nadere informatie

PIR DC-SWITCH. DC Passive infra-red Detector. Model No. PDS-10 GEBRUIKSAANWIJZING/INSTRUCTION MANUAL

PIR DC-SWITCH. DC Passive infra-red Detector. Model No. PDS-10 GEBRUIKSAANWIJZING/INSTRUCTION MANUAL PIR DC-SWITCH DC Passive infra-red Detector Model No. PDS-10 GEBRUIKSAANWIJZING/INSTRUCTION MANUAL Please read this manual before operating your DETECTOR PIR DC-Switch (PDS-10) De PDS-10 is een beweging

Nadere informatie

liniled Cast Joint liniled Gietmof liniled Castjoint

liniled Cast Joint liniled Gietmof liniled Castjoint liniled Cast Joint liniled Gietmof liniled is een hoogwaardige, flexibele LED strip. Deze flexibiliteit zorgt voor een zeer brede toepasbaarheid. liniled kan zowel binnen als buiten in functionele en decoratieve

Nadere informatie

Shipment Centre EU Quick Print Client handleiding [NL]

Shipment Centre EU Quick Print Client handleiding [NL] Shipment Centre EU Quick Print Client handleiding [NL] Please scroll down for English. Met de Quick Print Client kunt u printers in Shipment Centre EU configureren. De Quick Print Client kan alleen op

Nadere informatie

2 Port DVI VGA Dual Monitor KVM Switch USB with Audio & USB 2.0 Hub

2 Port DVI VGA Dual Monitor KVM Switch USB with Audio & USB 2.0 Hub 2 Port DVI VGA Dual Monitor KVM Switch USB with Audio & USB 2.0 Hub Product ID: SV231DDUSB The StarTech.com SV231DDUSB 2-port Dual Monitor KVM Switch (DVI+VGA) offers a complete dual display multimedia

Nadere informatie

2019 SUNEXCHANGE USER GUIDE LAST UPDATED

2019 SUNEXCHANGE USER GUIDE LAST UPDATED 2019 SUNEXCHANGE USER GUIDE LAST UPDATED 0 - -19 1 WELCOME TO SUNEX DISTRIBUTOR PORTAL This user manual will cover all the screens and functions of our site. MAIN SCREEN: Welcome message. 2 LOGIN SCREEN:

Nadere informatie

Today s class. Digital Logic. Informationsteknologi. Friday, October 19, 2007 Computer Architecture I - Class 8 1

Today s class. Digital Logic. Informationsteknologi. Friday, October 19, 2007 Computer Architecture I - Class 8 1 Today s class Digital Logic Friday, October 19, 2007 Computer Architecture I - Class 8 1 Digital circuits Two logical values Binary 0 (signal between 0 and 1 volt) Binary 1 (signal between 2 and 5 volts)

Nadere informatie

General info on using shopping carts with Ingenico epayments

General info on using shopping carts with Ingenico epayments Inhoudsopgave 1. Disclaimer 2. What is a PSPID? 3. What is an API user? How is it different from other users? 4. What is an operation code? And should I choose "Authorisation" or "Sale"? 5. What is an

Nadere informatie

WWW.EMINENT-ONLINE.COM

WWW.EMINENT-ONLINE.COM WWW.EMINENT-OINE.COM HNDLEIDING USERS MNUL EM1016 HNDLEIDING EM1016 USB NR SERIEEL CONVERTER INHOUDSOPGVE: PGIN 1.0 Introductie.... 2 1.1 Functies en kenmerken.... 2 1.2 Inhoud van de verpakking.... 2

Nadere informatie

L.Net s88sd16-n aansluitingen en programmering.

L.Net s88sd16-n aansluitingen en programmering. De L.Net s88sd16-n wordt via één van de L.Net aansluitingen aangesloten op de LocoNet aansluiting van de centrale, bij een Intellibox of Twin-Center is dat de LocoNet-T aansluiting. L.Net s88sd16-n aansluitingen

Nadere informatie

PLUS & PRO. Addendum installatie aanvullende MID 65A kwh-meter - Addendum installation additional MID 65A kwh-meter SET

PLUS & PRO. Addendum installatie aanvullende MID 65A kwh-meter - Addendum installation additional MID 65A kwh-meter SET PLUS & PRO Addendum installatie aanvullende MID 65A kwh-meter - Addendum installation additional MID 65A kwh-meter 1 Aansluiten MID 65A kwh-meter Adres instellen MID 65A kwh-meter Maxem kan verschillende

Nadere informatie

OUTDOOR HD BULLET IP CAMERA PRODUCT MANUAL

OUTDOOR HD BULLET IP CAMERA PRODUCT MANUAL OUTDOOR HD BULLET IP CAMERA PRODUCT MANUAL GB - NL GB PARTS & FUNCTIONS 1. 7. ---- 3. ---- 4. ---------- 6. 5. 2. ---- 1. Outdoor IP camera unit 2. Antenna 3. Mounting bracket 4. Network connection 5.

Nadere informatie

SPID Azimuth antenna rotator Type: RAK

SPID Azimuth antenna rotator Type: RAK Gauke Boelensstraat 108 NL-9203 RS Drachten The Netherlands Tel: +31 (0) 512 354 126 GSM: +31 (0) 650 882 889 Fax: +31 (0) 847 187 776 www.rfhamdesign.com E-mail: info@rfhamdesign.com SPID Azimuth antenna

Nadere informatie

Innovatief monitoren van sportvelden. 31 mei 2018

Innovatief monitoren van sportvelden. 31 mei 2018 Innovatief monitoren van sportvelden 31 mei 2018 31 mei 2018 Met Intelligent Play een gegarandeerde levensduur en exploitatie van sportsportvelden Wim Glaap, Newae Alex Talton, Intelligent Play Sportvelden

Nadere informatie

Cameramanager LSU Installation Guide

Cameramanager LSU Installation Guide Cameramanager LSU Installation Guide Network based video surveillance server Version 1.1 / August 2009 Copyright 2010 - Cameramanager.com Page 1 LSU installation guide index 1. Connecting the LSU to your

Nadere informatie

OUTDOOR HD DOME IP CAMERA PRODUCT MANUAL GB - NL

OUTDOOR HD DOME IP CAMERA PRODUCT MANUAL GB - NL OUTDOOR HD DOME IP CAMERA PRODUCT MANUAL GB - NL GB PARTS & FUNCTIONS 2. ---- 1. ---- 3. ---- 7. ---------- 5. 4. 6. 1. Outdoor IP camera unit 2. Antenna 3. Mounting bracket 4. Network connection 5. Power

Nadere informatie

802.11b Wireless router w. 4 port switch. StarTech ID: BR411BWDC

802.11b Wireless router w. 4 port switch. StarTech ID: BR411BWDC 802.11b Wireless router w. 4 port switch StarTech ID: BR411BWDC Share your Internet connection without being constrained by cables with StarTech.com s 802.11b wireless router. The BR411BWDC lets you share

Nadere informatie

BathySurvey. A Trimble Access hydrographic survey module

BathySurvey. A Trimble Access hydrographic survey module BathySurvey A Trimble Access hydrographic survey module Contents 1. Introduction... 3 2. Installation... 4 3. Main Screen... 5 4. Device... 6 5. Jobs... 7 6. Settings Odom Echotrac... 8 7. Settings Ohmex

Nadere informatie

Procedure Reset tv-toestellen:

Procedure Reset tv-toestellen: Procedure Reset tv-toestellen: Volgende procedure is te volgen wanneer er een tv-toestel, op een van de kamers niet meer werkt. TV Re-installation Factory Default Her-installeren van de TV Fabrieksinstellingen

Nadere informatie

Handleiding Zuludesk Parent

Handleiding Zuludesk Parent Handleiding Zuludesk Parent Handleiding Zuludesk Parent Met Zuludesk Parent kunt u buiten schooltijden de ipad van uw kind beheren. Hieronder vind u een korte handleiding met de mogelijkheden. Gebruik

Nadere informatie

Groene industrie POWER QUALITY POWER AND SIGNAL QUALITY. Phoenix Contact B.V. 2015-2016

Groene industrie POWER QUALITY POWER AND SIGNAL QUALITY. Phoenix Contact B.V. 2015-2016 Groene industrie Phoenix Contact B.V. 2015-2016 POWER AND SIGNAL QUALITY POWER QUALITY 24V PWR ERR 24V 0V 0V OUT I GND GND GND ON OFF 1 2 1A 5A NC PACT RCP- Rogowskisp Eerst Power Quality inzichtelijk

Nadere informatie

EM6250 Firmware update V030507

EM6250 Firmware update V030507 EM6250 Firmware update V030507 EM6250 Firmware update 2 NEDERLANDS/ENGLISH Table of contents 1.0 (NL) Introductie... 3 2.0 (NL) Firmware installeren... 3 3.0 (NL) Release notes:... 5 1.0 (UK) Introduction...

Nadere informatie

SPID Azimuth antenna rotator Type: BIG-RAK

SPID Azimuth antenna rotator Type: BIG-RAK SPID Azimuth antenna rotator Type: BIG-RAK Specifications: SPID BIG RAK PWM Azimuth Rotator BIG RAK @ 12V BIG RAK @ 18V Turning torque in-lbs/nm 2,800 in lb/315 Nm 3,600 in lb/403 Nm Brake Torque in lbs/nm

Nadere informatie

Classification of triangles

Classification of triangles Classification of triangles A triangle is a geometrical shape that is formed when 3 non-collinear points are joined. The joining line segments are the sides of the triangle. The angles in between the sides

Nadere informatie

MyDHL+ ProView activeren in MyDHL+

MyDHL+ ProView activeren in MyDHL+ MyDHL+ ProView activeren in MyDHL+ ProView activeren in MyDHL+ In MyDHL+ is het mogelijk om van uw zendingen, die op uw accountnummer zijn aangemaakt, de status te zien. Daarnaast is het ook mogelijk om

Nadere informatie

SMS Manual. SMS Module. User Manual INNOVATIVE & COMPACT EASY TO PROGRAM LOW COST FACTOR - 1 - U p d a t e d : October 12, 2 0 0 9

SMS Manual. SMS Module. User Manual INNOVATIVE & COMPACT EASY TO PROGRAM LOW COST FACTOR - 1 - U p d a t e d : October 12, 2 0 0 9 SMS Manual INNOVATIVE & COMPACT EASY TO PROGRAM LOW COST FACTOR User Manual SMS Module U p d a t e d : October 12, 2 0 0 9 The xlogic SuperRelay is an Easy Electronic manufactured product. INNOVATIVE &

Nadere informatie

Hoe te verbinden met NDI Remote Office (NDIRO): Apple OS X How to connect to NDI Remote Office (NDIRO): Apple OS X

Hoe te verbinden met NDI Remote Office (NDIRO): Apple OS X How to connect to NDI Remote Office (NDIRO): Apple OS X Handleiding/Manual Hoe te verbinden met (NDIRO): Apple OS X How to connect to (NDIRO): Apple OS X Inhoudsopgave / Table of Contents 1 Verbinden met het gebruik van Apple OS X (Nederlands)... 3 2 Connect

Nadere informatie

SPL D2 MKII GEBRUIKSAANWIJZING USER MANUAL

SPL D2 MKII GEBRUIKSAANWIJZING USER MANUAL SPL D2 MKII GEBRUIKSAANWIJZING USER MANUAL Spl-D2 Next generation Inleiding De SPL5-D2 unit is een geluidsdrukmeter die gekoppeld kan worden aan de SPL5. Het apparaat kan ook als losse geluidsdrukmeter

Nadere informatie

DALISOFT. 33. Configuring DALI ballasts with the TDS20620V2 DALI Tool. Connect the TDS20620V2. Start DALISOFT

DALISOFT. 33. Configuring DALI ballasts with the TDS20620V2 DALI Tool. Connect the TDS20620V2. Start DALISOFT TELETASK Handbook Multiple DoIP Central units DALISOFT 33. Configuring DALI ballasts with the TDS20620V2 DALI Tool Connect the TDS20620V2 If there is a TDS13620 connected to the DALI-bus, remove it first.

Nadere informatie

MyDHL+ Van Non-Corporate naar Corporate

MyDHL+ Van Non-Corporate naar Corporate MyDHL+ Van Non-Corporate naar Corporate Van Non-Corporate naar Corporate In MyDHL+ is het mogelijk om meerdere gebruikers aan uw set-up toe te voegen. Wanneer er bijvoorbeeld meerdere collega s van dezelfde

Nadere informatie

Virtual Enterprise Centralized Desktop

Virtual Enterprise Centralized Desktop Virtual Enterprise Centralized Desktop Het gebruik van virtuele desktops en de licensering daarvan Bastiaan de Wilde, Solution Specialist Microsoft Nederland Aanleiding Steeds meer gebruik van Virtuele

Nadere informatie

SPID Azimuth Antenna rotator Type: RAK/HR

SPID Azimuth Antenna rotator Type: RAK/HR WWW.RFHAMDESIGN.COM SPID Azimuth Antenna rotator Type: RAK/HR SPID RAK/HR MD-02 Rotor Controller Type RAK/HR is a 1 engine rotor system (Azimuth) and delivered including: RAK/HR rotor 0.2 degree resolution

Nadere informatie

L.Net s88sd16-n aansluitingen en programmering.

L.Net s88sd16-n aansluitingen en programmering. De L.Net s88sd16-n wordt via één van de L.Net aansluitingen aangesloten op de LocoNet aansluiting van de centrale, bij een Intellibox of Twin-Center is dat de LocoNet-T aansluiting. L.Net s88sd16-n aansluitingen

Nadere informatie

Presentation Fire fighter safety switch

Presentation Fire fighter safety switch Presentation Fire fighter safety switch 20 september 2011 Elsbeth Faasse Cor Jansen Santon Holland BV AGENDA SANTON INTRODUCTION PRODUCTS NEW DEVELOPMENTS The Fire fighter Safety Switch Introductie Diverse

Nadere informatie

FAAC DRIVER. Driver install procedure for FAAC boards. Installatieprocedure voor driver voor FAAC-kaarten.

FAAC DRIVER. Driver install procedure for FAAC boards. Installatieprocedure voor driver voor FAAC-kaarten. FAAC DRIVER Driver install procedure for FAAC boards Installatieprocedure voor driver voor FAAC-kaarten www.record-toegangstechniek.nl 1 When a FAAC board (E124 or E145) is connected to the USB port, it

Nadere informatie

Quick start guide. Powerbank MI Mah. Follow Fast All rights reserved. Page 1

Quick start guide. Powerbank MI Mah. Follow Fast All rights reserved. Page 1 Quick start guide Powerbank MI 16.000 Mah Follow Fast 2016 - All rights reserved. Page 1 ENGLISH The Mi 16000 Power Bank is a very good backup option for those on the move. It can keep you going for days

Nadere informatie

Circulatiepompen voor de Glastuinbouw Pompgrafieken

Circulatiepompen voor de Glastuinbouw Pompgrafieken - orticulture Circulation umps erformance Curves Circulatiepompen voor de Glastuinbouw ompgrafieken. kw CL CLB z. kw / and / 9 rpm - - - - - - - - - A- - - - - - - - A- - A- - - - - -. kw - / and / [m/h

Nadere informatie

EM7680 Firmware Update by OTA

EM7680 Firmware Update by OTA EM7680 Firmware Update by OTA 2 NEDERLANDS/ENGLISH EM7680 Firmware update by OTA Table of contents 1.0 (NL) Introductie... 3 2.0 (NL) Firmware installeren... 3 3.0 (NL) Release notes:... 3 4.0 (NL) Overige

Nadere informatie

MCP-16RC, luchtzuiveringstoren

MCP-16RC, luchtzuiveringstoren Compacte patroonfilter met pulsreiniging De MCP-16RC luchtzuiveringstoren is een compacte patroonfilter voor gedecentraliseerde reiniging van binnenlucht, waar terugwinnen van lucht mogelijk is. Het compacte

Nadere informatie

Produkt-Datenblatt. Technische Daten, Spezifikationen. MEsstechnik fängt mit ME an. Kontakt

Produkt-Datenblatt. Technische Daten, Spezifikationen. MEsstechnik fängt mit ME an.   Kontakt Produkt-Datenblatt Technische Daten, Spezifikationen Kontakt Technischer und kaufmännischer Vertrieb, Preisauskünfte, Angebote, Test-Geräte, Beratung vor Ort: Tel: (0 81 41) 52 71-0 FAX: (0 81 41) 52 71-129

Nadere informatie

Optinet-MX-V2. Ethernet IO-modules. Opticom Engineering B.V.

Optinet-MX-V2. Ethernet IO-modules. Opticom Engineering B.V. Optinet-MX-V2 Ethernet IO-modules Opticom Engineering B.V. INSTALLATIE - 2 - januari 2012 TOEPASSING De Optinet-V2 kan worden uitgebreid met externe ethernet IO-modules. Deze modules kunnen worden aangesloten

Nadere informatie

PROGRAMMING MANUAL ZeelProg PDCI-25V

PROGRAMMING MANUAL ZeelProg PDCI-25V www.zeeltronic.com info@zeeltronic.com updated 11.12.2013 application version: 01.131209 PROGRAMMING MANUAL ZeelProg PDCI-25V Supported control units: PDCI-25V ZeelProg is PC application for programming

Nadere informatie

Het beheren van mijn Tungsten Network Portal account NL 1 Manage my Tungsten Network Portal account EN 14

Het beheren van mijn Tungsten Network Portal account NL 1 Manage my Tungsten Network Portal account EN 14 QUICK GUIDE C Het beheren van mijn Tungsten Network Portal account NL 1 Manage my Tungsten Network Portal account EN 14 Version 0.9 (June 2014) Per May 2014 OB10 has changed its name to Tungsten Network

Nadere informatie

SPID Azimuth & Elevation antenna rotator Type: BIG-RAS/HR

SPID Azimuth & Elevation antenna rotator Type: BIG-RAS/HR Gauke Boelensstraat 108 NL-9203 RS Drachten The Netherlands Tel: +31 (0) 512 354 126 GSM: +31 (0) 650 882 889 Fax: +31 (0) 847 187 776 www.rfhamdesign.com E-mail: info@rfhamdesign.com SPID Azimuth & Elevation

Nadere informatie

Schinfa Machinerevisie

Schinfa Machinerevisie The revolutionary new milling machine High speed spindle - Minimal floorspace - Lineair guides - Servo engines - TNC 320 control - Siemens 828d Mill300 De ideale machine voor technische opleidingen, instrumentmakers

Nadere informatie

I.S.T.C. Intelligent Saving Temperature Controler

I.S.T.C. Intelligent Saving Temperature Controler MATEN & INFORMATIE I.S.T.C. Intelligent Saving Temperature Controler Deze unieke modulerende zender, als enige ter wereld, verlaagt het energieverbruik aanzienlijk. Het werkt in combinatie met de energy

Nadere informatie

WWW.EMINENT-ONLINE.COM

WWW.EMINENT-ONLINE.COM WWW.EMINENT-ONLINE.COM NL HANDLEIDING USERS MANUAL EM1033 HANDLEIDING NL EM1033 TWEE POORTS AUTOMATISCHE KVM SWITCH INHOUDSOPGAVE: PAGINA 1.0 Introductie.... 2 1.1 Functies en kenmerken.... 2 1.2 Inhoud

Nadere informatie

Firewall van de Speedtouch 789wl volledig uitschakelen?

Firewall van de Speedtouch 789wl volledig uitschakelen? Firewall van de Speedtouch 789wl volledig uitschakelen? De firewall van de Speedtouch 789 (wl) kan niet volledig uitgeschakeld worden via de Web interface: De firewall blijft namelijk op stateful staan

Nadere informatie

LED BAR SERIE PLUG & PLAY SYSTEEM LED BAR SERIES PLUG & PLAY SYSTEM PROLUMIA

LED BAR SERIE PLUG & PLAY SYSTEEM LED BAR SERIES PLUG & PLAY SYSTEM PROLUMIA PLUG & PLAY SYSTEEM PLUG & PLAY SYSTEM LED BAR SERIE LED BAR SERIES De krachtige LED Bar serie combineert een strakke vormgeving met een uitstekende lichtopbrengst. Meerdere LED Bar modules kunnen eenvoudig

Nadere informatie

Project Name: New project

Project Name: New project 1/19/218-1:31 AM 1/31 CONTENTS Bill Of Material... 5 Controller... 5 Modules... 5 Hardware Configuration... 6 MyController - TM221CE4R... 6 Digital Inputs... 6 Digital Outputs... 7 Analog Inputs... 7 Fast

Nadere informatie

LONDEN MET 21 GEVARIEERDE STADSWANDELINGEN 480 PAGINAS WAARDEVOLE INFORMATIE RUIM 300 FOTOS KAARTEN EN PLATTEGRONDEN

LONDEN MET 21 GEVARIEERDE STADSWANDELINGEN 480 PAGINAS WAARDEVOLE INFORMATIE RUIM 300 FOTOS KAARTEN EN PLATTEGRONDEN LONDEN MET 21 GEVARIEERDE STADSWANDELINGEN 480 PAGINAS WAARDEVOLE INFORMATIE RUIM 300 FOTOS KAARTEN EN PLATTEGRONDEN LM2GS4PWIR3FKEP-58-WWET11-PDF File Size 6,444 KB 117 Pages 27 Aug, 2016 TABLE OF CONTENT

Nadere informatie

Hoe met Windows 8 te verbinden met NDI Remote Office (NDIRO) How to connect With Windows 8 to NDI Remote Office (NDIRO

Hoe met Windows 8 te verbinden met NDI Remote Office (NDIRO) How to connect With Windows 8 to NDI Remote Office (NDIRO Handleiding/Manual Hoe met Windows 8 te verbinden met NDI Remote Office (NDIRO) How to connect With Windows 8 to NDI Remote Office (NDIRO Inhoudsopgave / Table of Contents 1 Verbinden met het gebruik van

Nadere informatie

Technische Informatie Industrie-trackerballs met Laser-optischen scanning TKH-TB50LFvariabel

Technische Informatie Industrie-trackerballs met Laser-optischen scanning TKH-TB50LFvariabel Technische Informatie Artikel ID Model Afmetingen Bal diameter bal materiaal Drukkracht TB Veerkacht Omgevingstemperatur Opslag temperatuur Behuizing Aansluiting Afdichting Gewicht Technologie Spanning

Nadere informatie

FOR DUTCH STUDENTS! ENGLISH VERSION NEXT PAGE. Toets Inleiding Kansrekening 1 8 februari 2010

FOR DUTCH STUDENTS! ENGLISH VERSION NEXT PAGE. Toets Inleiding Kansrekening 1 8 februari 2010 FOR DUTCH STUDENTS! ENGLISH VERSION NEXT PAGE Toets Inleiding Kansrekening 1 8 februari 2010 Voeg aan het antwoord van een opgave altijd het bewijs, de berekening of de argumentatie toe. Als je een onderdeel

Nadere informatie

Welkom bij OSRAM! LED Expo Benelux RD 5209

Welkom bij OSRAM! LED Expo Benelux RD 5209 www.osram.nl Welkom bij OSRAM! LED Expo Benelux RD 5209 www.osram-benelux.com Licht management systemen LED Expo Benelux RD 5209 Licht Management Systemen zijn het in de op de op het juiste licht juiste

Nadere informatie

AE1103 Statics. 25 January h h. Answer sheets. Last name and initials:

AE1103 Statics. 25 January h h. Answer sheets. Last name and initials: Space above not to be filled in by the student AE1103 Statics 09.00h - 12.00h Answer sheets Last name and initials: Student no.: Only hand in the answer sheets! Other sheets will not be accepted Write

Nadere informatie

PANEELRADIATOR - Type PR Handleiding. PANEL RADIATOR - Type PR Manual

PANEELRADIATOR - Type PR Handleiding. PANEL RADIATOR - Type PR Manual Fax. +31 (0)227-549 150 Website: www.sinusjevi.com PANEELRADIATOR - Type PR Handleiding PANEL RADIATOR - Type PR Manual Page 2 of 8 Page 3 of 8 Technische informatie Spanning: 230 of 400 Volt Vermogen:

Nadere informatie

2006 Volkswagen Jetta TDI

2006 Volkswagen Jetta TDI Door handle and door lock, assembly overview The illustration shows the left side. The right side is derived accordingly from this. Fig. 99: Door Handle And Door Lock, Assembly Overview 1 - Cable For disengaging

Nadere informatie

ABIFLEXX ROBOTIC SYSTEMS ENDLESS POSSIBILITIES

ABIFLEXX ROBOTIC SYSTEMS ENDLESS POSSIBILITIES ABIFLEXX ROBOTIC SYSTEMS ENDLESS POSSIBILITIES www.abi.nl Made in Holland ROBOTIC SYSTEMS ABIflexx Robotic Systems offer the following advantages Available as separate components or as a complete system,

Nadere informatie

ATEX serie ATEX range

ATEX serie ATEX range ATEX serie ATEX range εx ATEX SERIE / ATEX RANGE Deze afsluiters zijn ontworpen en geproduceerd in overeenstemming met CE richtlijnen 94/9 apparaten en protectiesystemen gebruikt in potentiële explosieve

Nadere informatie

19% of the global energy is used for lighting. Dazzletek can Help Reducing the Energy Content without Compromising on Safety

19% of the global energy is used for lighting. Dazzletek can Help Reducing the Energy Content without Compromising on Safety Paris Climate Summit 2015 19% of the global energy is used for lighting Dazzletek can Help Reducing the Energy Content without Compromising on Safety Dazzletek provides intelligent, wireless Lighting

Nadere informatie

Remote sensor series

Remote sensor series Remote sensor series DATASHEET Sensor Partners BV James Wattlaan 15 5151 DP Drunen The Netherlands +1 ()1-7 9 info@sensorpartners.com sensorpartners.com Sensor Partners BVBA Z.1 Researchpark 1 B-1, Zellik

Nadere informatie

CTI SUITE TSP DETAILS

CTI SUITE TSP DETAILS CTI SUITE TSP DETAILS TAPI allows an application to access telephony services provided by a telecom PABX. In order to implement its access to ETRADEAL, a TAPI interface has been developed by Etrali. As

Nadere informatie

MCP-16RC, luchtzuiveringstoren

MCP-16RC, luchtzuiveringstoren Compact cartridge filter with pulse cleaning De MCP-16RC luchtzuiveringstoren is een compacte patroonfilter voor gedecentraliseerde reiniging van binnenlucht, waar terugwinnen van lucht mogelijk is. Het

Nadere informatie

Valves for Panel Mounting

Valves for Panel Mounting 2.2 page 31 2.2 Valves for Panel Mounting Selected models are available for explosion hazardous environment. They are ATEX-Ex certified. For detailed information refer to chapter 2.14. Selected models

Nadere informatie

Hard Disk Drive Duplicator Dock USB 3.0 to SATA HDD Duplicator

Hard Disk Drive Duplicator Dock USB 3.0 to SATA HDD Duplicator Hard Disk Drive Duplicator Dock USB 3.0 to SATA HDD Duplicator Product ID: SATDOCK22RU3 The SATDOCK22RU3 USB 3.0 to SATA Hard Drive Duplicator Dock can be used as a standalone SATA hard drive duplicator,

Nadere informatie

liniled Marker Light Power Short Pitch

liniled Marker Light Power Short Pitch liniled Marker Light Power Short Pitch 2700K 3000K Natural White 4000K Cold White 6500K liniled Markeerlicht Power Short Pitch liniled Markeerlichten zijn uitermate geschikt om een route of locatie te

Nadere informatie

Feedback WG System Operations 21 November 2012

Feedback WG System Operations 21 November 2012 Feedback WG System Operations 21 November 2012 User Group 06/12/2012 Wim Michiels Content Feedback IGCC Winter action plan Draft ENTSO-E winter outlook 2012 2013 Capaciteit noordgrens Overview of dynamic

Nadere informatie

Mounting ceiling & wall

Mounting ceiling & wall 5 / profile 34 bending radius R 15*) (1015) R 20 (1015) R 30 (1015) R>80 (1018) filler position profile 26 bending radius filler position R 15*) (1015) R 25 (1015) R>100 (1018) 28 15 405 gr/m 522 gr/m

Nadere informatie

WeZoWe - Werkgroep Zonnepanelen Westeinde. Het adres voor al uw installatiewerk!!

WeZoWe - Werkgroep Zonnepanelen Westeinde. Het adres voor al uw installatiewerk!! WeZoWe - Werkgroep Zonnepanelen Westeinde Het adres voor al uw installatiewerk!! Inhoud: o Over ons o Advies o Montage o Waarom Zonderland o Gerealiseerde projecten o Garantie o Prijzen o Stand o Advertentie

Nadere informatie

SAP Exchange Infrastructure. SAP Partner Connectivity Kit Overview

SAP Exchange Infrastructure. SAP Partner Connectivity Kit Overview SAP Exchange Infrastructure SAP Partner Connectivity Kit Overview SAP Partner Connectivity Kit Overview Enablement of smaller companies / subsidiaries to exchange XML documents with their business partner

Nadere informatie

NETWORK CHARTER. #ResourceEfficiency

NETWORK CHARTER. #ResourceEfficiency NETWORK CHARTER 1 WHAT IS THE EREK NETWORK? EREK stands for the European Resource Efficiency Knowledge Centre, a vibrant platform to enable and reinforce businesses and especially small and medium sized

Nadere informatie

EM7680 Firmware Auto-Update for Kodi 17.2

EM7680 Firmware Auto-Update for Kodi 17.2 EM7680 Firmware Auto-Update for Kodi 17.2 2 NEDERLANDS/ENGLISH EM7680 Firmware Auto-update for Kodi 17.2 Table of contents 1.0 (NL) Introductie... 3 2.0 (NL) Firmware installeren... 3 3.0 (NL) Opmerking...

Nadere informatie

Cameramanager LSU Installation Guide

Cameramanager LSU Installation Guide Cameramanager LSU Installation Guide Network based video surveillance server Version 1.3 / November 2011 Copyright 2011 - Cameramanager.com Page 1 LSU installation guide index 1. Connecting the LSU to

Nadere informatie

Whisper Power Battery Link WBI WBL-120

Whisper Power Battery Link WBI WBL-120 Operation manual Gebruikershandleiding Whisper Power Battery Link WBI WBL-120 WHISPER POWER BV Kelvinlaan 82 9207 JB Drachten Netherlands Tel.: +31-512-571550 Fax.: +31-512-571599 www.whisperpower.eu V1.

Nadere informatie

De PROFIBUS, PROFINET & IO-Link dag. Edegem, 8 juni 2010. PROFIBUS Belgium VZW PROFIBUS, PROFINET & IO-Link

De PROFIBUS, PROFINET & IO-Link dag. Edegem, 8 juni 2010. PROFIBUS Belgium VZW PROFIBUS, PROFINET & IO-Link De PROFIBUS, PROFINET & IO-Link dag Edegem, 8 juni 2010 PROFIBUS Belgium VZW PROFIBUS, PROFINET & IO-Link 2010 2 Agenda 1. Omschrijving project 2. Voorstelling materialen 3. Redundancy 4. Visualisatie

Nadere informatie

RECEPTEERKUNDE: PRODUCTZORG EN BEREIDING VAN GENEESMIDDELEN (DUTCH EDITION) FROM BOHN STAFLEU VAN LOGHUM

RECEPTEERKUNDE: PRODUCTZORG EN BEREIDING VAN GENEESMIDDELEN (DUTCH EDITION) FROM BOHN STAFLEU VAN LOGHUM Read Online and Download Ebook RECEPTEERKUNDE: PRODUCTZORG EN BEREIDING VAN GENEESMIDDELEN (DUTCH EDITION) FROM BOHN STAFLEU VAN LOGHUM DOWNLOAD EBOOK : RECEPTEERKUNDE: PRODUCTZORG EN BEREIDING VAN STAFLEU

Nadere informatie

open standaard hypertext markup language internetprotocol transmission control protocol internet relay chat office open xml

open standaard hypertext markup language internetprotocol transmission control protocol internet relay chat office open xml DOWNLOAD OR READ : OPEN STANDAARD HYPERTEXT MARKUP LANGUAGE INTERNETPROTOCOL TRANSMISSION CONTROL PROTOCOL INTERNET RELAY CHAT OFFICE OPEN XML PDF EBOOK EPUB MOBI Page 1 Page 2 relay chat office open xml

Nadere informatie

Installatie van Windows 10 op laptops. Windows 10 installation on laptops

Installatie van Windows 10 op laptops. Windows 10 installation on laptops Installatie van Windows 10 op laptops In mei vindt de migratie naar Windows 10 plaats op de laptops. Per dag worden ongeveer 25 laptops gemigreerd. Elke laptop heeft een ISSC-sticker met een laptop-nummer.

Nadere informatie

Agilent EEsof EDA. Waveform Bridge to FlexDCA and Infiniium. New Features for Solving HSD Challenges with ADS Heidi Barnes June 17/18/20, 2013

Agilent EEsof EDA. Waveform Bridge to FlexDCA and Infiniium. New Features for Solving HSD Challenges with ADS Heidi Barnes June 17/18/20, 2013 New Features for Solving HSD Challenges with ADS 2013 Waveform Bridge to FlexDCA and Infiniium Agilent EEsof EDA Heidi Barnes June 17/18/20, 2013 Copyright 2013 Agilent Technologies 1 Agenda Post-Layout

Nadere informatie

Chapter 4 Understanding Families. In this chapter, you will learn

Chapter 4 Understanding Families. In this chapter, you will learn Chapter 4 Understanding Families In this chapter, you will learn Topic 4-1 What Is a Family? In this topic, you will learn about the factors that make the family such an important unit, as well as Roles

Nadere informatie

Inleiding. Inhoud. Marble Automation MS-5B 2

Inleiding. Inhoud. Marble Automation MS-5B 2 Inhoud Inleiding...2 Algemeen...3 Omschrijving alarm...4 Omschrijving status...4 Omschrijving lock ingang/groep uitgang...4 Programmeren...5 Selectie ingang...5 Instellingen ingangen/uitgangen...6 Vertraging...6

Nadere informatie

Puurs Logistics Centre. 25,000 sqm built-to-suit development opportunity on the Antwerp-Brussels axis. build your future+

Puurs Logistics Centre. 25,000 sqm built-to-suit development opportunity on the Antwerp-Brussels axis. build your future+ Puurs Logistics Centre 25,000 sqm built-to-suit development opportunity on the Antwerp-Brussels axis build your future+ Puurs Logistics Centre Brabantstraat 2, 2870 Puurs Puurs Logistics Centre Brabantstraat

Nadere informatie

Process Mining and audit support within financial services. KPMG IT Advisory 18 June 2014

Process Mining and audit support within financial services. KPMG IT Advisory 18 June 2014 Process Mining and audit support within financial services KPMG IT Advisory 18 June 2014 Agenda INTRODUCTION APPROACH 3 CASE STUDIES LEASONS LEARNED 1 APPROACH Process Mining Approach Five step program

Nadere informatie

Johto. Flexible light

Johto. Flexible light Johto Flexible light Johto is a high quality lighting system based on LED for technically sophisticated interior and exterior light. It provides homogeneous and dot free illumination in very low installation

Nadere informatie

100 % flexibiliteit en optimalisatie met Flexible Machine Control

100 % flexibiliteit en optimalisatie met Flexible Machine Control SoMachine 100 % flexibiliteit en optimalisatie met Flexible Machine Control 1 software platform Vereenvoudigt het programmeren en inbedrijfname met SoMachine 4 Hardware Control Platforms Geïntegreerde

Nadere informatie

FOD VOLKSGEZONDHEID, VEILIGHEID VAN DE VOEDSELKETEN EN LEEFMILIEU 25/2/2016. Biocide CLOSED CIRCUIT

FOD VOLKSGEZONDHEID, VEILIGHEID VAN DE VOEDSELKETEN EN LEEFMILIEU 25/2/2016. Biocide CLOSED CIRCUIT 1 25/2/2016 Biocide CLOSED CIRCUIT 2 Regulatory background and scope Biocidal products regulation (EU) nr. 528/2012 (BPR), art. 19 (4): A biocidal product shall not be authorised for making available on

Nadere informatie

NMOZTMKUDLVDKECVLKBVESBKHWIDKPDF-WWUS Page File Size 9,952 KB 29 May, 2016

NMOZTMKUDLVDKECVLKBVESBKHWIDKPDF-WWUS Page File Size 9,952 KB 29 May, 2016 NAVIJVEN MINILAMPJES OM ZELF TE MAKEN KERSTFIGUREN UIT DE LAPPENMAND VOOR DE KINDERSSALOON EN COWBOYS VAN LOLLYSTOKJES KAMERBREED BOEKENREK VOOR EEN SMAL BUDGETGEBAKKEN KOEKFIGUURTJES HANGEN WE IN DE KERSTBOOM

Nadere informatie

Mobile Devices, Applications and Data

Mobile Devices, Applications and Data Mobile Devices, Applications and Data 1 Jits Langedijk Senior Consultant Jits.langedijk@pqr.nl Peter Sterk Solution Architect peter.sterk@pqr.nl Onderwerpen - Rol van Mobile IT in Tomorrow s Workspace

Nadere informatie

Adaptieve thermisch comfort richtlijnen in het buitenland

Adaptieve thermisch comfort richtlijnen in het buitenland Adaptieve thermisch comfort richtlijnen in het buitenland ir. Atze Boerstra, BBA Boerstra Binnenmilieu Advies ISSO symposium Thermisch Binnenklimaat 10 november 2005 Rigide eis oude normen: Winter binnen:

Nadere informatie